Cure Monitoring and Internal Strain Measurement of 3-D Hybrid Braided Composites using Fiber Bragg Grating Sensor

Abstract

Curing behavior and internal strain of 3-D hybrid braided composites is studied using embedded fiber Bragg grating (FBG) sensors. Thermo-optic coefficients and photo-elastic constant of fabricated FBG sensors are experimentally determined. A seven-layered three-dimensional (3-D) braided preform is fabricated. S2 glass fiber is used as the main braiding yarn, and Kevlar fiber is inserted in the exterior surface layer in the axial direction. Several nylon fibers are braided together in order to replace the FBG sensors after braiding. FBG sensors are embedded along the curved braiding yarn as well as in the machine direction. An FBG-embedded 3-D braided composite is fabricated using the resin-transfer molding (RTM) process. During the cure process, the expansion and contraction caused by the matrix cure as well as temperature changes are monitored. Local dimensional changes are measured quantitatively using an FBG sensor system. The FBG sensor embedded along a curved braiding yarn exhibited a relatively small amount of shrinkage. By using embedded FBG sensors and surface-bonded electric strain gages, internal strains of the 3-D braided composite are measured during compressive and flexural tests, and the results show good agreement with each other.

Keywords

FBG embedded composite 3-D hybrid braid cure monitoring cure shrinkage internal strain.

Get full access to this article

View all access options for this article.

References

Zhou, G. , Sim, L.M. , Brewster, P.A. and Giles, A.R. (2004). Through-the-thickness Mechanical Properties of Smart Quasi-isotropic Carbon/Epoxy Laminates, Composites Part A: Applied Science and Manufacturing, 35(7—8): 797—815.

Li, H.N. , Li, D.S. and Song, G.B. (2004). Recent Applications of Fiber Optic Sensors to Health Monitoring in Civil Engineering , Engineering Structures, 26(11): 1647—1657.

Maaskant, R. , Alavie, T. , Measures , R.M. , Tadros, G. , Rizkalla, S.H. and Guha-Thakurta , A. (1997). Fiber-optic Bragg Grating Sensors for Bridge Monitoring, Cement and Concrete Composites, 19(1): 21—33.

Murukeshan, V.M. , Chan, P.Y. , Ong , L.S. and Seah, L.K. (2000). Cure Monitoring of Smart Composites using Fiber Bragg Grating based Embedded Sensors, Sensors and Actuators A: Physical, 79(2): 153—161.

Okabe, Y. , Mizutani, T. , Yashiro, S. and Takeda, N. (2002). Detection of Microscopic Damages in Composite Laminates: with Embedded Small-diameter Fiber Bragg Grating Sensors, Composites Science and Technology, 62(7—8): 951—958.

Meltz, G. , Morey, W.W. and Glenm, W.H. (1989). Formation of Bragg Gratings in Optical Fibers by a Transverse Holographic Method, Optics Letters, 14(15): 823—825.

Chou, T.W. and Frank, K.K. (1989). Textile Structural Composites, Elsevier Publishing Company, Amsterdam.

Bigaud, D. , Dréano, L. and Hamelin, P. (2005). Models of Interactions between Process, Microstructure and Mechanical Properties of Composite Materials — A Study of the Interlock Layer-to-layer Braiding Technique, Composite Structures, 67(1): 99—114.

Kostar, T.D. , Chou, T.W. and Popper, P. (2000). Characterization and Comparative Study of Three-dimensional Braided Hybrid Composites, Journal of Materials Science, 35(9): 2175— 2183.

10.

Jung, K.H. , Kang, T.J. , Chung, K. , Youn, J.R. and Kim, S.J. (2003). Optimum Geometric Modeling of 3D Circular Braided Composites, In: 14th International Conference on Composite Materials (ICCM-14), ID 1961, San Diego, California .

11.

Chen, L. , Tao, X.M. and Choy, C.L. (1999). On the Microstructure of Three-dimensional Braided Preforms, Composites Science and Technology, 59(3): 391—404.

12.

Bigaud, D. and Hamelin, P. (2002). Stiffness and Failure Modeling of 2D and 3D Textile-reinforced Composites by Means of Imbricate-type Elements Approaches, Computers and Structures, 80(27—30): 2253—2264.

13.

Rao, Y.J. , Yuan, S.F. , Zeng, X.K. , Lian, D.K. , Zhu, Y. , Wang, Y.P. , Huang, S.L. , Liu, T.Y. , Fernando, G.F. , Zhang, L. and Bennion, I. (2002). Simultaneous Strain and Temperature Measurement of Advanced 3-D Braided Composite Materials using an Improved EFPI/FBG System , Optics and Lasers in Engineering, 38(6): 557—566.

14.

Shenfang, Y. , Rui, H. , Xianghua , L. and Xiaohui, L. (2004). Determination of Internal Strain in 3-D Braided Composites using Optic Fiber Strain Sensors, Acta Mechanica Solida Sinica, 17(1): 52—57.

15.

Hill, K.O. and Meltz, G. (1997). Fiber Bragg Grating Technology Fundamentals and Overview, Journal of Lightwave Technology, 15(8): 1263—1276.

16.

Grattan, K.T.V. and Meggitt, B.T. (1998). Optical Fiber Sensor Technology Volume 2 Devices and Technology, Chapman & Hall, London.

17.

Du, W. , Tao, X.M. , Tam, H.Y. and Choy, C.L. (1998). Fundamentals and Applications of Optical Fiber Bragg Grating Sensors to Textile Structural Composites, Composite Structures, 42(3): 217—229.

18.

Leng, J. and Asundi, A. (2003). Structural Health Monitoring of Smart Composite Materials by using EFPI and FBG Sensors, Sensors and Actuators A: Physical, 103(3): 330—340.

19.

Pandey, R. and Hahn, H.T. (1996). Visualization of Representative Volume Elements for Three-dimensional Four-step Braided Composites, Composites Science and Technology, 56(2): 161—170.