A carbon fiber surface is treated with silsesquioxane (SSO) coatings, including methyl-SSO (MES-SSO), vinyl-SSO (VMS-SSO), and 3-(methacryloxy) propyl-SSO (MPMS-SSO). The mechanical behavior of the carbon fiber—polyarylacetylene (CF—PAA) composites is studied in terms of force modulation mode atomic force microscope (AFM), short-beam bending, microdebonding, and impact tests. A transitional layer appears between the fiber and resin after the carbon fibers are treated with SSO coating. Based on experimental results, The authors conclude that the mechanical interfacial properties of the composites, i.e., interlaminar shear strength (ILSS) and interfacial shear strength (IFSS), are largely increased by the SSO coatings on the fiber surface. Impact properties of the composites are also dominated by SSO coatings. These results could be explained as probably due to the effect of SSO coatings, resulting in improved ductile fracture properties, thereby increasing the resistance to deformation and crack initiation of the polyarylacetylene system.
Katzman, H.A. , Mallon, J.J. and Barry, W.T. (1995). Polyarylacetylene-matrix Composites for Solid Rocket Motor Components, J. Adv. Mater. , 26(3): 21—27.
2.
Zaldivar, R.J. , Relick, G.S. and Yang, J.M. (1991). Processing Effects on the Mechanical Behavior of Polyarylacetylene-derived Carbon/Carbon Composites , SAMPE J, 27(5): 29—36.
3.
Lin, J.S., Huang, Y.H. and Chiu, H.T. (2001). Effect of Chemical Oxidation on the Interfacial Bonding between Carbon Fibre and Epoxy Resin, Polym. Polym. Compos., 9(5): 351—359.
4.
Fukunaga, A. , Ueda, S. and Nagumo, M. (1999). Air-oxidation and Anodization of Pitch-based Carbon Fibres, Carbon, 37(8): 1081—1085.
5.
King, T.R., Asams, D.F. and Buttry, D.A. (1991). Anodic Oxidation of Pitch-precursor Carbon Fibres in Ammonium Sulphate Solutions, The Effect of Fibre Surface Treatment on Composite Mechanical Properties, Composites, 22(5): 380—387.
6.
Yumitori, S. and Nakanishi, Y. (1996). Effect of Anodic Oxidation of Coal Tar Pitch-based Carbon Fibre on Adhesion in Epoxy Matrix: Part 1. Comparison between H2SO4 and NaOH Solutions, Compos Part A, 27(11): 1051—1058.
7.
Fu, X.L. , Lu, W.M. and Chung, D.D.L. (1998). Ozone Treatment of Carbon Fibre for Reinforcing Cement, Carbon, 36(9): 1337—1345.
8.
Montes-Morán, M.A., Martínez-Alonso , A., Tascón, J.M.D. and Young, R.J. (2001). Effects of Plasma Oxidation on the Surface and Interfacial Properties of Ultra-high Modulus Carbon Fibres, Compos Part A, 32(3—4): 361—371.
9.
Montes-Morán, M.A., Martínez-Alonso , A., Tascón, J.M.D., Paiva, M.C. and Bernardo, C.A. (2001). Effects of Plasma Oxidation on the Surface and Interfacial Properties of Carbon Fibres/ Polycarbonate Composites, Carbon, 39(7): 1057—1068.
10.
Beinborn, K.M. , Müller, M. and Hüttinger, K.J. (1995). The Significance of the Fibre Coating in the Production of Carbon Fibre-reinforced Carbons from HT Carbon Fibres I. Poly(dimethylsiloxane) and Poly(methylphenylsiloxane) Coatings, Carbon, 33(5): 1029—1042.
11.
Beinborn, K.M. , Müller, M. and Hüttinger, K.J. (1995). The Significance of the Fibre Coating in the Production of Carbon Fibre-reinforced Carbons from HT Carbon Fibres and Phenolic Resin as Matrix Precursor II. Phenolic Resin Coatings, Carbon, 33(5): 1043—1046.
12.
Fu, H.J. , Huang, Y.D. and Liu, L. (2004). Influence of Fibre Surface Oxidation Treatment on Mechanical Properties of Carbon Fibre/Polyarylacetylene Composites, Mater. Sci. Technol., 20(12): 1655—1660.
13.
Ramírez, C. , Abad, M.J., Barral, L. and Cano, J. (2003). Thermal Behaviour of a Polyhedral Oligomeric Silsesquioxane with Epoxy Resin Cured by Diamines , J. Therm. Anal. Calor, 72(2): 421—429.
14.
Eisenberg, P., Erra-Balsells, R., Ishikawa, Y., Lucas, J.C., Nanami, H. and Williams, R.J.J. (2002). Silsesquioxanes Derived from the Bulk Polycondensation of [3-(methacryloxy)proyl]-trimethoxysilane with Concentrated Formic Acid: Evolution of Molar Mass Distributions and Fraction of Intramolecular Cycles, Macromolecules,35(4): 1160—1174.
15.
Fasce, D.P. , Williams, R.J.J., Erra-Balsells , R., Ishikawa, Y. and Nonami, H. (2001). One-step Synthesis of Polyhedral Silsesquioxanes Bearing Bulky Substituents: UV-MALDI-TOF and ESI-TOF Mass Spectrometry Characterization of Reaction Products , Macromolecules, 34(11): 3534—3539.
16.
Fether, F.J., Terroba, R., Jin, R.Z., Lucke, S., Nquyen, F., Brutchey, R., et al. (2000). Major Advances in the Synthesis of POSS Monomers, Organic/Inorganic Hybrid Material-2000, Materials Research Society, San Francisco (CA, USA), CC2.1.1-6
17.
Phillips, S.H., Blanski, R.L., Svejda, S.A., Haddad, T.S., Lee, A., Lichtenhan, J.D., et al. (2000). New Insight into the Structure-property Relationships of Hybrid (Inorganic/Organic) POSS [trademark] Thermoplastics, Organic/Inorganic Hybrid Material-2000, Materials Research Society, San Francisco (CA, USA), CC4.6.1-10.
18.
Lee, A., Xiao, J. and Feher, F.J. (2005). New Approach in the Synthesis of Hybrid Polymers Grafted with Polyhedral Oligomeric Silsesquioxane and Their Physical and Viscoelastic Properties, Macromolecules,38(2): 438—444.
19.
Fu, B.X., Namani, M. and Lee, A. (2003). Influence of Phenyl-trisilanol Polyhedral Silsesquioxane on Properties of Epoxy Network Glasses, Polymer, 44(25): 7739—7747.
20.
Yei, D.R., Kuo, S.W., Su, Y.C. and Chang, F.C. (2004). Enhanced Thermal Properties of PS Nanocomposites Formed from Inorganic POSS-treated Montmorillonite, Polymer , 45: 2633—2640.
21.
Gilman, J.W., Bourbigot, S., Shields, J.R. and Nyden, M. (2003). High Throughput Methods for Polymer Nanocompostites Research: Extrusion, NMR Characterization and Flammability Property Screening , In: Int. SAMPE Symp. Exhib., 48II: 1459—1474.
22.
Choi, J., Yee, A.F. and Laine, R.M. (2003). Organic/Inorganic Hybrid Composites from Cubic Silsesquioxane. Epoxy Resins of Octa(dimethylsiloxyethylcyclohexylepoxide) Silsesquioxane, Macromolecules,36(15): 5666—5682.
23.
Constable, G.S., Lesser, A.J. and Coughlin, E.B. (2004). Morphological and Mechanical Evaluation of Hybrid Organic—Inorganic Thermoset Copolymers of Dicyclopentadiene and Mono- or Tris(norbornenyl)-substituted polyhedral Oligomeric Silsesquioxanes , Macromolecules,37(3): 1276—1282.
24.
Huang, J.C. , Xiao, Y., Mya, K.Y., Liu, X.M., He, C.B., Dai, J. and Siow, Y.P. (2004). Thermomechanical Properties of Polyimide-epoxy Nanocomposites from Cubic Silsesquioxane Epoxides, J. Mater. Chem., 14(19): 2858—2863.
25.
Ni, Y., Zheng, S. and Nie, K. (2004). Morphology and Thermal Properties of Inorganic—Organic Hybrids Involving Epoxy Resin and Polyhedral Doligomeric Silsesquioxanes, Polymer, 45(21): 5557—5568.
26.
Jayaraman, K., Gao, Z. and Reifsnider, K. (1994). Interphase in Unidirectional Fibre-reinforced Epoxies: Effect on Local Stress Fields, J. Compos. Technol. Res., 16(1): 21—31.
27.
Downing, T.D. , Kumar, R., Cross, W.M., Kjerengtroen , L. and Kellar, J.J. (2000). Determining the Interphase Thickness and Properties in Polymer Matrix Composites using Phase Imaging Atomic Force Microscopy and Nanoindentation, J. Adhes. Sci. Technol., 14(14): 1801—1812.
28.
Gao, S. and Mader, E. (2002). Characterisation of Interphase Nanoscale Property Variations in Glass Fibre Reinforced Polypropylene and Epoxy Resin Composites , Compos. Part A, 33(4): 559—576.
29.
Khanna, S.K. , Ranganathan, P., Yedia, S.B., Winter, R.M. and Paruchuri , K. (2003). Investigation of Nanomechanical Properties of the Interphase in a Glass Fibre Reinforced Polyester Compostite using Nanoindentation, J. Eng. Mater. Technol. Trans., 125(2): 90—96.
30.
Li, F.B. , Thompson, G.E. and Newman, R.C. (1998). Force Modulation Atomic Force Microscopy: Background, Developed and Application to Electrodeposited Cerium Oxide Films, Appl. Surf. Sci., 126(1—2): 21—33.
