The aim of this paper is to evaluate the effect of the alkali treatment on the mechanical properties of jute fibers and its composites. The effect on the processing conditions was also analyzed. Woven jute preforms were used to prepare the composites using the vacuum infusion technique. The fibers were treated with NaOH (5wt.%) for 24 h at room temperature. Single filament tests showed that the treatment was detrimental for the mechanical properties of the fibers. The injection times increased in the treated jute preforms as a consequence of the increase in the exposed area and the flow resistance. The preform permeability decreased, also, in the tubular structure collapse of the fibers, which could reduce the capillary pressure. Flexural and impact properties of the treated jute composites decreased mainly in the lower mechanical properties of the fibers.
Van de Weyenberg, I., Ivens, J., De Coster, B., Kino, B., Baetens, E. and Verpoest, I. (2003). Influence of Processing and Chemical Treatment of Flax Fibres on their Composites, Composites Science and Technology, 63(9): 1241—1246.
2.
Pothan, L.A. and Thomas, S. (2003). Polarity Parameters and Dynamic Mechanical Behaviour of Chemically Modified Banana Fiber Reinforced Polyester Composites, Composites Science and Technology, 63(9): 1231—1240.
3.
Gañan, P., Garbizu, S., Llano-Ponte, R. and Mondragón, I. (2005). Surface Modification of Sisal Fibers: Effects on the Mechanical and Thermal Properties of their Epoxy Composites, Polymer Composites, 26(2): 121—127.
4.
Sydenstricker, T.H.D., Mochnaz, S. and Amico, S.C. (2003). Pull-out and Other Evaluations in Sisal-reinforced Polyester Biocomposites, Polymer Testing, 22(4): 375—380.
5.
Rong, M.Z., Zhang, M.Q., Liu, Y., Zhang, Z.W., Yang, G.C. and Zeng, H.M. (2001). The Effect of Fiber Treatment on the Mechanical Properties of Unidirectional Sisal-reinforced Epoxy Composites, CompositesScience and Technology, 61(10): 1437—1447.
6.
Ray, D., Sarkar, B.K. and Bose, N.R. (2002). Impact Fatigue Behaviour of Vinylester Resin Matrix Composites Reinforced with Alkali Treated Jute Fibres, Composites : Part A, 33(2): 233—241.
7.
Ray, D., Sarkar, B.K., Das, S. and Rana, A.K. (2002). Dynamic and Thermal Analysis of Vinyl Ester-Resin-Matrix Composites Reinforced with Untreated and Alkali-treated Jute Fibres, CompositesScience and Technology, 62(7): 911—917.
8.
Albuquerque, A.C., Joseph, K., Hecker de Carvalho , L. and Morais d'Almeida, J.R. (2000 ). Effect of Wettability and Ageing Conditions on the Physical and Mechanical Properties of Uniaxially Oriented Jute-roving-reinforced Polyester Composites, Composites Science and Technology, 60(6): 833—844.
9.
Gassan, J. and Bledzki, A.K. (1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibres, CompositesScience and Technology, 59(9): 1303—1309.
10.
O'Dell, J.L. (1997). Natural Fibers in Resin Transfer Moulded Composites . Fourth International Conference on Woodfiber—Plastic Composites Conference Proceedings, Madison, WI, USA: Forest Products Society, pp. 280—285.
11.
Baiardo, M. , Frisoni, G., Scandola, M. and Licciardello , A. (2002). Surface Chemical Modification of Natural Cellulose Fibers, Journal of AppliedPolymer Science, 83(1): 38—45.
12.
Aziz, H.A., Ansell, M.P., Clarke, S.J. and Panteny, S.R. (2005). Modified Polyester for Natural Fibre Composites, CompositesScience and Technology, 65(3): 525—535.
13.
O'Donnel, A. , Dweib, M.A. and Wool, R.P. (2004). Natural Fiber Composites with Plant Oil-based Resin, CompositesScience and Technology , 64(9): 1135—1145.
14.
Keener, T.J. , Stuart, R.K. and Brown, T.K. (2004). Maleated Coupling Agents for Natural Fibre Composites, Composites: Part A, 35(33): 357—362.
15.
Rong, M.Z., Zhang, M.Q., Liu, Y., Zhang, Z.W., Yang, G.C. and Zeng, H.M. (2002). Interfacial Interaction in Sisal/Epoxy Composites and its Influence on Impact Performance, PolymerComposites , 23(2): 182—192.
16.
Sreekala, M.S. and Thomas, S. (2003). Effect of Fibre Surface Modification on Water-sorption Characteristics of Oil Palm Fibres, Composites Science and Technology, 63(3): 861—869.
17.
Mwaikambo, L.Y. and Ansell, M.P. (2002). Chemical Modification of Hemp, Sisal, Jute, and Kapok Fibers by Alkalization, Journal of AppliedPolymer Science, 84(12): 2222—2234.
18.
Biagiotti, J., Puglia, D., Torre, L., Kenny, J.M., Arbelaiz, A., Cantero, G., Marieta, C., Llano Ponte, R. and Mondragón, I. (2004). A Systematic Investigation on the Influence of Chemical Treatment of Natural Fibers on the Properties of their Polymer Matrix Composites, Polymer Composites, 25(5): 470—479.
19.
Al-Khanabashi, K., Al-Kaabi, K. and Hammami, A. (2005). Date Palm Fibers as Polymeric Matrix Reinforcement: Fiber Characterization, Polymer Composites , 26(4): 486—497.
20.
Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibres, Progress inPolymer Science, 24(2): 221—274.
21.
Alvarez, V. , Rodríguez, E. and Vázquez, A. (2005). Thermal Degradation and Decomposition of Jute/Vinylester Composites. Journal of Thermal Analysis and Calorimetry (published online).
22.
American Society for Testing and Materials, ASTM Standards ASTM D 3379—75. Standard Test Methods for Void Content of Reinforced Plastics.
23.
American Society for Testing and Materials, ASTM Standards ASTM 790. Standard Test Methods for Void Content of Reinforced Plastics.
24.
American Society for Testing and Materials, ASTM Standards ASTM D256-84. Standard Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials.
25.
Gassan, J., Chate, A. and Bledzki, A.K. (2001). Calculation of Elastic Properties of Natural Fibers, Journal of MaterialsScience, 36(15): 3715—3720.
26.
Mannan, Kh.M. and Talukder, M.A.I. (1997). Characterization of Raw, Delignified and Bleanched Jute Fibres by Study of Absorption of Moisture and Some Mechanical Properties, Polymer, 38(10): 2493—2500.
27.
Tripathy, S.S. , Di landro, L., Fontanelli, D., Marchetti, A. and Levita, G. (2000). Mechanical Properties of Jute Fibers and Interface Strength with an Epoxy Resin, Journal of Applied Polymer Science, 75(13): 1585—1596.
28.
Kawahara, Y., Endo, R. and Kimura, T. (2004). Chemical Finishing of Bast Fibers and Woods Using Hydrolyzed Keratin from Waste Wool or Down, Textile Research Journal, 74(2): 93—96.
29.
Gebart, B. and Lidström, P. (1996). Measurement of In-plane of Anisotropic Fiber Reinforcements , Polymer Composites, 17(1): 43—51.
30.
Rodríguez, E. , Giacomelli, F. and Vázquez, A. (2004). Permeability-porosity Relationship in RTM for Different Fiberglass and Natural Reinforcements, Journal ofComposite Materials, 38(3): 259—268.
31.
Parnas, R.S., Salem, A.J., Sadiq, T.A.K., Wang, H.-P. and Advani, G. (1994). The Interaction Between Micro- and Macroscopic Flow in RTM Preforms, Composite Structures, 27(1—2): 93—107.
32.
Dungan, F.D. and Sastry, A.M. (2002). Saturated and Unsaturated Polymer Flows: Microphenomena and Modeling, Journal ofComposite Materials, 36(13): 1581—1603.
33.
Pillai, K.M. and Advani, G. (1998). A Model for Unsaturated Flow in Woven Fiber Preforms During Mold Filling in Resin Transfer Molding , Journal of Composite Materials, 32(19): 1753—1783.
34.
Luo, Y., Verpoest, I., Hoes, K., Vanheule, M., Sol, H. and Cardon, A. (2001). Permeability Measurement of Textile Reinforcements with Several Test Fluids, Composites: Part A, 32(10): 1497—1504.
35.
Han, K.K., Lee, C.W. and Rice, B.P. (2000). Measurements of the Permeability of Fiber Preforms and Applications, CompositesScience and Technology, 60(12): 2435—2441.
36.
Lee, G.-W., Lee, N.-J., Jang, J., Lee, K.-J. and Nam, J.-D. (2002). Effects of Surface Modification on the Resin-transfer Moulding (RTM) of Glass-fibre/Unsaturated-polyester Composites, CompositesScience and Technology, 62(1): 9—16.
37.
Chang, A.W. and Morgan, R.J. (1993). Tow Impregnation During Resin Transfer Molding of Bi-directional Nonwoven Fabrics, PolymerComposites, 14(4): 335—340.
38.
Gowda, M.T. , Naidu, A.C.B. and Chhaya, R. (1993). Some Mechanical Properties of Untreated Jute-fabric-reinforced Polyester Composites, Composites: Part A, 30(3): 277—284.
39.
Baer, E. and Moet, A. (1991). High Performance Polymers, Hanser Publishers, Munich, pp. 201—239.
40.
Acha, B., Marcovich, N.E. and Reboredo, M.M. (2005). Physical and Mechanical Characterization of Jute Fabric Composites, Journal of AppliedPolymer Science, 98(2): 639—650.
41.
Pavithran, C., Mukherjee, P.S., Brahmakumar, M. and Damodaran, A.D. (1987). Impact Properties of Natural Fibre Composites, Journal of Materials Science Letters , 6(8): 882—884.
42.
Rodríguez, E., Petrucci, R., Puglia, D., Kenny, J.M. and Vázquez, A. (2005). Characterization of Composites Based on Natural and Glass Fibers Obtained by Vacuum Infusion, Journal ofComposite Materials, 39(3): 265—282.
