Effects of Fiber Arrangement on Mechanical Behavior of Unidirectional Composites

Abstract

Micromechanical approaches are employed to investigate the influence of different fiber arrangement on the mechanical behavior of unidirectional composites (UD) under various loading conditions. A micromechanical model with a random fiber array is generated and used in a finite element analysis together with two frequently used representative volume elements (RVE), or unit cell models of square and hexagonal arrays. The algorithm for generating the random fiber array is verified by comparing the comprehensive performance of a unit cell based on our random array and that of a unit cell based on a real fiber distribution in the UD cross-section. Performance of the random and regular fiber arrays is also evaluated through frequency distributions of stress invariants in matrix and tractions at the fiber—matrix interface due to various loading types. The effects of different loading angles on the overall response of regular arrays to various loading conditions are investigated thoroughly. Finally, the Weibull distribution of the maximum normal interfacial traction in random array is compared with the cumulative probability distribution of transverse strength data acquired from experiment, and good agreement is achieved.

Keywords

random fiber array square array hexagonal array representative volume element (RVE)unit cell statistics unidirectional composites.

Get full access to this article

View all access options for this article.

References

Bednarcyk, B.A. and Arnold, S.M. (2001). Micromechanics-based Deformation and Failure Prediction for Longitudinally Reinforced Titanium Composites, Composites Science and Technology, 61: 705-729.

Kok, de J.M.M. and Meijer, H.E.H. (1999). Deformation, Yield and Fracture of Unidirectional Composites in Transverse Loading - I: Influence of Fiber Volume Fraction and Test-temperature, Composites Part A: Applied Science and Manufacturing, 30: 905-916.

Laird II, G. and Kennedy, T.C. (1995). Micromechanics of Composite Materials under Compressive Loading, Engineering Fracture Mechanics, 51: 417-430.

Berryman, J.G. and Berge, P.A. (1996). Critique of Two Explicit Schemes for Estimating Elastic Properties of Multiphase Composites, Mechanics of Materials, 22: 149-164.

Lamon, J. (2001). A Micromechanics-Based Approach to the Mechanical Behavior of Brittle-Matrix Composites, Composites Science and Technology, 61: 2259-2272.

Kwon, Y.W. and Berner, J.M. (1995). Micromechanics Model for Damage and Failure Analyses of Laminated Fibrous Composites, Engineering Fracture Mechanics , 52: 231-242.

Brinson, L.C. and Lin, W.S. (1998). Comparison of Micromechanics Methods for Effective Properties of Multiphase Viscoelastic Composites, Composite Structures, 41: 353-367.

Sun, C.T. and Vaidya, R.S. (1996). Prediction of Composite Properties from a Representative Volume Element, Composites Science and Technology, 56: 171-179.

Caiazzo, A.A. and Costanzo, F. (2000). On the Effective Elastic Properties of Composites with Evolving Microcracking, Journal of Reinforced Plastics and Composites, 19: 152-163.

10.

Dong, M. and Schmauder, S. (1996). Modeling of Metal Matrix Composites by a Self-Consistent Embedded Cell Model, Acta Materialia, 44: 2465-2478.

11.

Sun, H. , Di, S. , Zhang, N. and Wu, C. (2001). Micromechanics of Composite Materials using Multivariable Finite Element Method and Homogenization Theory , International Journal of Solids and Structures, 38: 3007-3020.

12.

Li, S. (2001). General Unit Cells for Micromechanical Analyses of Unidirectional Composites, Composites Part A: Applied Science and Manufacturing, 32: 815-826.

13.

Whitcomb, J. and Tang, X. (2002). Micromechanics of Moisture Diffusion in Composites with Impermeable Fibers, Journal of Composite Materials, 36: 1093-1101.

14.

Zhang, Y. , Xia, Z. and Ellyin, F. (2004). Evolution and Influence of Residual Stresses/Strains of Fiber Reinforced Laminates, Composites Science and Technology , 64: 1613-1621.

15.

Bonora, N. and Ruggiero, A. (2006). Micromechanical Modeling of Composites with Mechanical Interface - Part I: Unit Cell Model Development and Manufacturing Process Effects, Composites Science and Technology, 66: 314-322.

16.

Bonora, N. and Ruggiero, A. (2006). Micromechanical Modeling of Composites with Mechanical Interface - Part II: Damage Mechanics Assessment, Composites Science and Technology, 66: 323-332.

17.

Drago, A. and Pindera, M.-J. (2007). Micro-Macromechanical Analysis of Heterogeneous Materials: Macroscopically Homogeneous vs Periodic Microstructures, Composites Science and Technology, 67: 1243-1263.

18.

Cai, H. , Miyano, Y. , Nakada, M. and Ha, S.K. (2008). Long-Term Fatigue Strength Prediction of CFRP Structure Based on Micromechanics of Failure, Journal of Composite Materials, 42: 825-844.

19.

Everett, R.K. and Chu, J.H. (1993). Modeling of Non-Uniform Composite Microstructures, Journal of Composite Materials , 27: 1128-1144.

20.

Chen, X. and Papathanasiou, T.D. (2004). Interface Stress Distributions in Transversely Loaded Continuous Fiber Composites: Parallel Computation in Multi-Fiber RVEs Using the Boundary Element Method, Composites Science and Technology, 64: 1101-1114.

21.

Wongsto, A. and Li, S. (2005). Micromechanical FE Analysis of UD Fiber-Reinforced Composites with Fibers Distributed at Random over the Transverse Cross-Section, Composites Part A: Applied Science and Manufacturing, 36: 1246-1266.

22.

Oh, J.H. , Jin, K.K. and Ha, S.K. (2006). Interfacial Strain Distribution of a Unidirectional Composite with Randomly Distributed Fibers under Transverse Loading, Journal of Composite Materials, 40: 759-778.

23.

Jin, K.K. , Oh, J.H. and Ha, S.K. (2007). Effect of Fiber Arrangement on Residual Thermal Stress Distributions in a Unidirectional Composite, Journal of Composite Materials, 41: 591-611.

24.

Ha, S.K. (2002). Micromechanics in the Analysis of Composite Structures , In: 6th Composites Durability Workshop (CDW-6) , Tokyo, Japan, November 14-15.

25.

Jin, K.K. , Huang, Y. , Lee, Y.H. and Ha, S.K. (2008). Distribution of Micro Stresses and Interfacial Tractions in Unidirectional Composites, Journal of Composite Materials (In print).

26.

Sun, Z. , Daniel, I.M. and Luo J.J. (2003). Statistical Damage Analysis of Transverse Cracking in High Temperature Composite Laminates, Materials Science and Engineering A, 341: 49-56.

27.

Ha, S.K. , Jin, K.K. and Huang, Y. (2008). Micro-Mechanics of Failure (MMF) for Continuous Fiber Reinforced Composites, Journal of Composite Materials (In print).