Ring-shaped glass fiber/polyester composite specimens cut from composite pipes with various lengths and cut edge quality were immersed into deionized water, and their water absorption was noted regularly by registering their mass gain. Monotonic ring compression tests were performed to monitor the stiffness properties during the water absorption process. Effect of specimen length and cut edge sealing with the matrix material of the pipe on the water absorption process was analyzed. Water absorption curves were fitted to the experimental data with very high correlation coefficients. Specimen types with cut edge sealing were found to absorb significantly less water than the other types, and the absorbed water showed a nonlinear monotonic decreasing tendency with specimen length. Mechanical properties were found to be only slightly affected by moisture probably because of the small amount of absorbed water.
Lukacs, J. (2005). Dimensions of Lifetime Management, Materials Science Forum, 473-474: 361-368.
2.
Stein, D. (2001). Rehabilitation and Maintenance of Drains and Sewers , Ernst & Sohn, Berlin
3.
Abacha, N., Kubouchi, M., Tsuda K. and Sakai, T. (2007). Performance of Epoxy-Nanocomposite Under Corrosive Environment, Express Polymer Letters, 1(6): 364-369.
4.
Soden, P.D., Kitching, R., Tse, P.C., Tsavalas, Y. and Hinton, M.J. (1993). Influence of Winding Angle on the Strength and Deformation of Filament-Wound Composite Tubes Subjected to Uniaxial and Biaxial Loads, Composites. Science and Technology, 46(4): 363-378.
5.
Hull, D. and Spencer, B. (1978). Effect of Winding Angle on the Failure of Filament Wound Pipe, Composites, 9: 263-271.
6.
Nagy, P. and Vas, L.M. (2007). Relationship Between Constant Strain Rate and Stress Relaxation Behavior of Polypropylene, Express Polymer Letters, 1(2): 84-91.
7.
Bárány, T., Földes, E. and Czigány, T. (2007). Effect of Thermal and Hygrothermal Aging on the Plane Stress Fracture Toughness of Poly(ethylene terephthalate) Sheets, Express Polymer Letters, 1(3): 180-187.
8.
Roy, P.K. , Surekha, P., Rajagopal , C. and Choudhary, V. (2007). Thermal Degradation Studies of LDPE Containing Cobalt Stearate as Pro-oxidant , Express Polymer Letters, 1(4): 208-216.
9.
Perreux, D. and Suri, C. (1997). A Study of the Coupling Between the Phenomena of Water Absorption and Damage in Glass/Epoxy Composite Pipes, Composites Science and Technology, 57(9-10): 1403-1413.
10.
Farshad, M. and Necola, A. (2004). Effect of Aqueous Environment on the Long-term Behaviour of Glass Fiber-Reinforced Plastic Pipes, Polymer Testing, 23(2): 163-167.
11.
Gellert, E.P. and Turley, D.M. (1999). Seawater Immersion Ageing of Glass-Fiber Reinforced Polymer Laminates for Marine Applications , Composites Part A: Applied Science and Manufacturing, 30(11): 1259-1265.
12.
Kootsookos, A. and Mouritz, A.P. (2004). Seawater Durability of Glass- and Carbon-Polimer Composites, Composites Science and Technology, 64(10-11): 1503-1511.
13.
Fraga, A.N. , Alvarez, V.A., Vazquez , A. and De La Osa , O.(2003). Relationship Between Dynamic Mechanical Properties and Water Absorption of Unsaturated Polyester and Vinyl Ester Glass Fiber Composites, Journal of Composite Materials, 37(17): 1553-1574.
14.
Ellyin, F. and Maser, R. (2004). Environmental Effects on the Mechanical Properties of Glass-Fiber Epoxy Composite Tubular Specimens. Composites Science and Technology, 64(12): 1863-1874.
15.
Guedes, R.M. , Sa, A. and Faria, H. (2007). Influence of Moisture Absorption on Creep of GRP Composite Pipes, Polymer Testing , 26(5): 595-605.
16.
Chow, W.S. (2007). Water Absorption of Epoxy/Glass Fiber/Organo-Montmorillonite Nanocomposites, Express Polymer Letters, 1(2): 104-108.
17.
Nagy, V. and Vas, L.M. (2003). Intrayarn Porosity and Pore Size in Polyester Staple Yarns, In: International Textile Design and Engineering Conference Proceedings, Eninburgh, United Kingdom, pp. 201-208.
18.
Lucas, V.R. (1918). Ueber das Zeitgesetz des kapillaren Aufstiegs von Fluessigkeiten, Kolloid Zeitschrift , 23: 15-22.
19.
Washburn, E.W. (1921). The Dynamics of Capillary Flow, Physical Review, 17: 273-283.
20.
Carter, H.G. and Kibler, K.G. (1978). Langmuir-Type Model for Anomalous Moisture Diffusion in Composite Resins, Journal of Composite Materials, 12: 118-131.
21.
Czél , G. and Czigány, T. (2006). Moisture Absorption Properties of Filament Wound Polymer Composite Pipes, Gép, 57: 43-46. (in Hungarian)
22.
Buehler, F.U. and Seferis, J.C. (2000). Effect of Reinforcement and Solvent Content on Moisture Absorption in Epoxy Composite Materials, Composites Part A: Applied Science and Manufacturing , 31: 741-748.
23.
Mahdukar, M.S. and Drzal, L.T. (1992). Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. III. Longitudinal (0°) Compressive Properties of Graphite/Epoxy Composites, Journal of Composite Materials, 26: 310-333.
24.
Mahdukar, M.S. and Drzal, L.T. (1992). Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: IV. Mode I and Mode II Fracture Toughness of Graphite/Epoxy Composites, Journal of Composite Materials, 26: 936-968.
