Variable-stiffness laminates that have fiber orientation variation across its planform can be manufactured using advanced fiber placement technology. For such laminates, successive passes of the fiber placement head often overlap resulting in thickness build-up. If a constant thickness is desired, tows will be cut at the course boundary, which can result in small triangular resin-rich areas without any fibers. In this article a theoretical, numerical investigation of the influence of these tow-drop areas on the strength and stiffness of variable-stiffness laminates is performed. The effects of tow width, laminate thickness and staggering in combination with tow-drop areas are studied by making use of finite element simulations. A method for the localization of tow-drop areas is presented, and the expressions for implementing the tow-drop areas in a finite element model are given. Subsequently, progressive failure analyses using the LaRC failure criteria are performed. Failure occurs at tow-drop locations in both the surface plies and underlying plies. Wider tows result in lower strength. No correlation seems to exist between thickness and laminate strength, while staggering has a positive influence on strength.
Roeseler, W.G., Sarh, B. and Kismarton, M.U. (2007). Composite Structures: The First 100 Years, In: Proceedings of the 16th International Conference on Composite Materials, Kyoto, Japan.
2.
Tatting, B.F. and Gürdal, Z. (2002). Design and Manufacture of Elastically Tailored Tow Placed Plates Technical report, NASA/CR-2002-211919.
3.
Tatting, B.F. and Gurdal, Z. (2003). Automated Finite Element Analysis of Elastically-Tailored Plates Technical report, NASA/CR-2003-212679.
4.
Gurdal, Z., Tatting, B.F. and Wu, K.C. (2005). Tow-Placement Technology and Fabrication Issues for Laminated Composite Structures, in Proceedings of the 46th AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, Austin, TX, USA: AIAA.
5.
Jegley, D.C., Tatting, B.F. and Gurdal, Z. (2003). Optimization of Elastically Tailored Tow-Placed Plates with Holes, in Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials (SDM) Conference, Norfolk, VA, USA: AIAA.
6.
Wu, K.C. and Gürdal, Z. (2001). Thermal Testing of Tow-Placed Variable Stiffness Panels, In: Proceedings of the 42nd AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials Conference, AIAA, Seattle, WA, USA.
7.
Wu, K.C., Gürdal, Z. and Starnes, J. (2002). Structural Response of Compression-Loaded, Tow-Placed, Variable Stiffness Panels, In: Proceedings of the 43rd AIAA/ASME/AHS/ASC Structures, Structural Dynamics and Materials Conference , AIAA, Denver, CO, USA.
8.
Lopes, C., Gürdal, Z. and Camanho, P. (2007). Variable-Stiffness Composite Panels: Buckling And First-Ply Failure Improvements Over Straight-Fibre Laminates, Computers & Structures, 86(9): 897-907, doi:10.1016/j.compstruc.2007.04.016.
9.
Lopes, C., Camanho, P., Gürdal, Z. and Tatting, B.F. (2007). Progressive Failure Analysis of Tow-Placed, Variable-Stiffness Composite Panels, International Journal of Solids and Structures , 44(25-26): 8493-8516.
10.
Blom, A.W., Tatting, B.F., Hol, J.M.A.M. and Gürdal, Z. (2006). Path Definitions for Elastically Tailored Conical Shells, Journal of Composites: Part B, doi:10.1016/j.compositesb. 2008.03.11.
11.
Blom, A.W., Setoodeh, S., Hol, J.M.A.M. and Gürdal, Z. (2008). Design of Variable-Stiffness Conical Shells for Maximum Fundamental Eigenfrequency, Computers and Structures , 86(9): 870-878, doi:10.1016/j.physletb.2003.10.071.
12.
Blom, A.W., Abdalla, M.M. and Gürdal, Z. (2007). Optimization of Tow-Placed, Tailored Composite Laminates, In: Proceedings of the 16th International Conference on Composite Materials, Kyoto, Japan.
13.
ABAQUS, Inc. (2005). ABAQUS Version 6.6 User's Manual, Pawtucket, RI , USA.
14.
Maimí, P., Camanho, P., Mayugo, J. and Dávila, C. (2007). A Continuum Damage Model for Composite Laminates: Part I-Constitutive Model, Mechanics of Materials, 39(10): 897-908.
15.
Maimí, P., Camanho, P., Mayugo, J. and Dávila, C. (2007). A Continuum Damage Model for Composite Laminates: Part II-Computational Implementation and Validation, Mechanics of Materials, 39(10): 909-919.
16.
Dávila, C. and Camanho, P. (2003). Failure Criteria for FRP Laminates in Plane Stress Technical report, NASA, Langley Research Center, Hampton, VA, NASA/TM-2003-212663.
17.
Pinho, S., Dávila, C., Camanho, P., Iannucci, L. and Robinson, P. (2005). Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-linearityTechnical report, NASA, Langley Research Center, Hampton, VA, NASA/ TM-2005-213530.
18.
Bazžant, Z. and Jirásek, M. (2002). Nonlocal integral formulations of plasticity and damage: survey of progress, Journal of Engineering Mechanics, 128(11): 1119-1149.
19.
(2000). Standard Test Method for Tensile Properties of Polymer Matrix Composite materials Technical Report, American Society for Testing and Materials (ASTM), West Conshohocken, PA, USA, ASTM D 3039/D 3039M-00.
20.
(1987). Standard Test Method for Compressive Properties of Unidirectional or Crossply Fiber-resin Composites Technical Report, American Society for Testing and Materials (ASTM), West Conshohocken, PA, USA, ASTM D 3410-87.
21.
(1994). Standard Test Method for In-plane Shear Response of Polymer Matrix Composite Materials by test of a ±45° Laminate Technical Report, American Society for Testing and Materials (ASTM), West Conshohocken, PA, USA, ASTM D3518/3518M-94.
22.
(2001). Standard Test Methods for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-reinforced Polymer Matrix Composites Technical Report, American Society for Testing and Materials (ASTM), West Conshohocken, PA, USA, ASTM D 5528-01.
23.
Pinho, S., Robinson, P. and Iannucci, L. (2006). Fracture Toughness of the Tensile and Compressive Fibre Failure Modes in Laminated Composites, Composites Science and Technology, 66(13): 2069-2079.
24.
Martin, R., Elms, T. and Bowron, S. (1998). Characterization of Mode II Delamination Using the 4ENF, In: Proceedings of the 4th European Conference on Composites: Testing and Standardisation, Lisbon, Portugal.
25.
Camanho, P., Dávila, C., Pinho, S., Iannucci, L. and Robinson, P. (2006). Prediction of In Situ Strengths and Matrix Cracking in Composites under Transverse Tension and In-plane Shear , Composites Part A: Applied Science and Manufacturing, 37(2): 165-176.
26.
Camanho, P., Maimí, P. and Dávila, C. (2007). Prediction of Size Effects in Notched Laminates using Continuum Damage Mechanics, Composites Science and Technology , 67(13): 2715-2727.
