Homogenization of Moisture Diffusing Behavior of Composite Materials with Impermeable or Permeable Fibers — Application to Porous Composite Materials

Abstract

In order to predict the long-term durability of polymer matrix composite materials submitted to humid environments, the moisture diffusion behavior has to be investigated. The knowledge of the effective diffusivity is actually required, for estimating the moisture content of polymer-based fiber-reinforced materials, even when a basic behavior such as Fick's law is assumed to occur. The original contribution of the present work is to provide new analytical solutions for the effective diffusivities from the solving of unit cell problems on representative volume elements by means of several multi-scale approaches. Composite materials with impermeable or permeable fibers are extensively investigated. The proposed approaches are extended to the practical case of composite materials containing realistic voids volume fractions.

Keywords

homogenization effective moisture diffusivity closed-form solutions.

Get full access to this article

View all access options for this article.

References

Tsai, S.W. and Hahn, H.T. (1980). Introduction to Composite Materials, Westport, Conn.: Technomic Pub.

Springer, G.S. and Shen, C.H. (1976). Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, 10: 2-20.

Jacquemin, F. , Vautrin, A. (2002). Modelling of the Moisture Concentration Field due to Cyclical Hygrothermal Conditions in Thick Laminated Pipes, European Journal of Mechanics, 2: 845-855.

Stastna, J. and De Kee, D. (1995). Transport Properties in Polymers, Lancaster, Pa.: Technomic Pub.

Hashin, Z. (1972). Theory of Fibre Reinforced Materials, NASA CR-1974.

Viéville, P. and Lipinski, P. (1994). Application du shéma autocohéeent par étapes à la modéli sation des propriétés viscoélastique des composites, In: 9ème Journées Nationales Composites, Saint-Etienne , France.

Viéville, P. (1992). Influence des paramètres architecturaux sur les caractéristiques du bois à ses différentes échelles d'hétérogénéités, PhD Thesis of the Institut Polytechnique de Lorraine.

Whitcomb, J. and Tang, X. (2002). Micromechanics of Moisture Diffusion in Composites with Impermeable Fibres, Journal of Composite Materials, 36: 1093-1101.

Bond, D.A. (2005). Moisture Diffusion in a Fiber-reinforced Composite: Part I - Non-fickian Transport and the Effect of Fiber Spatial Distribution , Journal of Composite Materials, 39: 2113-2141.

10.

Huang, H. and Talreja, R. (2005). Effects of Voids Geometry on Elastic Properties of Unidirectional Fibre Reinforced Composites, Composite Science and Technology, 65: 1964-1981.

11.

Youssef, Z. , Jacquemin, F. , Gloaguen, D. and Guillén, R. (2007). Hygro-elastic Internal Stresses in Porous Composite Materials: A Multi-scale Analysis, Journal of Reinforced Plastics and Composites, 26: 1865-1880.

12.

Harper, B.D. , Staab, G.H. and Chen, R.S. (1987). A Note on the Effects of Voids Upon the Hygral and Mechanical Properties of AS4/3502 Graphite/Epoxy , Journal of Composite Materials, 21: 280-289.

13.

Woo, M. and Piggot, M.R. (1988). Water Absorption of Resins and Composites: IV Water Transport in Fiber Reinforced Plastics, Journal of Composites Technology & Research, 10: 20-24. 14. Loos, A.C. and Springer, G.S. (1981). Environmental Effects on Composite Materials, Lancaster, Pa.: Technomic Pub.

14.

Rao, R.M. , Chanda, M. and Balsubramanian , A. (1984). Factors Affecting Moisture Absorption in Polymer Composites Part ll: Influence of External Factors, Journal of Reinforced Plastic and Composites , 3: 246-251.