Parametric appraisal of a dry sliding wear process is presented for a set of new composites consisting of polyester as the matrix, flakes of pine-bark as the fibrous reinforcing component, and the kiln-dust of a cement plant as the filler. The filler content in the composites is fixed at 50 wt%, while the weight fraction of fiber reinforcement is varied (0—12 wt%) so as to obtain composite samples of three different compositions. Wear tests are carried out with the help of a pin-on-disc test rig employing the design of experiments approach based on Taguchi’s orthogonal arrays. The findings of the experiments indicate that the rate of wear is greatly influenced by various control factors. An optimal parameter combination is determined, which leads to minimization of wear rate. Analysis of variance is performed on the measured data and signal-to-noise (S/N) ratios. A mathematical correlation, consistent with the experimental observations is proposed as a predictive equation for estimation of sliding wear rate of these composites. Finally, optimal factor settings for minimum wear are determined using genetic algorithm.
Mehta, G., Drzal, L.T., Mohanty, A.K. and Misra, M. ( 2005). Effect of Fiber Surface Treatment on the Properties of Biocomposites From Nonwoven Industrial Hemp Fiber Mats and Unsaturated Polyester Resin, Journal of Applied Polymer Science, 99(2): 1055-1068.
2.
Ray, D., Sarkar, B.K. and Bose, N. ( 2002). Impact Fatigue Behaviour of Vinylester Resin Matrix Composites Reinforced With Alkali Treated Jute Fibres, Composites Part A, 33(2): 233-241.
3.
George, J., Sreekala, M.S. and Thomas, S. ( 2001). A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites, Polymer Engineering and Science, 41(9): 1471-1485.
4.
Gassan, J. and Bledzki, A.K. ( 1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibres, Composites Science and Technology, 59(9): 1303-1309.
5.
Aziz, S.H. and Ansel, M.P. ( 2004). The Effect of Alkalization and Fibre Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites: Part 1 - Polyester Resin Matrix, Composites Science and Technology , 64: 1219-1230.
6.
Felix, J.M. and Gatenholm, P. ( 1991). The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene, Journal of Applied Polymer Science , 42: 609.
7.
Dalvag, H., Klason, C. and Stromwall, H.E. ( 1985). Effects of Cellulose Fibers in Polypropylene Composites , International Journal of Polymeric Materials, 11: 9.
8.
Hamada, H., Ikuta, N., Nishida, N. and Maekaewa, Z. ( 1994). Effect of Interfacial Silane Network Structure on Interfacial Strength in Glass Fibre Composites, Composites, 25: 512.
9.
Belgacem, M.N. , Bataille, P. and Sapieha, S. (1994). Effect of Corona Modification on the Mechanical Properties of Polypropylene/Cellulose Composites, Journal of Applied Polymer Science, 53: 397.
10.
Eichhorn, S.J. , Baillie, C.A., Zafeiropoulos , N., Mwaikambo, L.Y., Ansell, M.P., Dufresne, A., Entwistle, K.M., Herrera-Franco, P.J., Escamilla, G.C., Groom, L.H., Hughes, M., Hill, C., Rials, T.G. and Wild, P.M. ( 2001). Current International Research into Cellulosic Fibres and Composites, Journal of Materials Science, 36: 2107.
11.
Jacob, M., Thomas, S. and Varughese, K.T. ( 2004). Mechanical Properties of Sisal/Oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Composites Science and Technology, 64: 955-965.
12.
Joseph, K., Thomas, S. and Pavithran, C. ( 1996). Effect of Chemical Treatment on the Tensile Properties of Short Sisal Fiber-reinforced Polyethylene Composite, Polymer , 37: 5139-5145.
13.
Joseph, S., Sreekalab, M.S., Oommena, Z., Koshyc, P. and Thomas, S. ( 2002). A Comparison of the Mechanical Properties of Phenol Formaldehyde Composites Reinforced with Banana Fibres and Glass Fibres, Composites Science and Technology, 62: 1857-1868.
14.
Varma, I.K. , Ananthakrishnan, S.R. and Krishnamoorthi , S. (1989). Comp of Glass/Modified Jute Fabric and Unsaturated Polyester, Composites, 20: 383.
15.
Pothana, L.A. , Oommenb, Z. and Thomas, S. (2003). Dynamic Mechanical Analysis of Banana Fiber Reinforced Polyester Composites, Composites Science and Technology, 63(2): 283-293.
16.
Tong, J., Arnell, R.D. and Ren, L. ( 1998). Dry Sliding Wear Behaviour of Bamboo, Wear, 221: 37-46.
17.
Tong, J., Ma, Y., Chen, D., Sun, J. and Ren, L. ( 2005). Effects of Vascular Fiber Content on Abrasive Wear of Bamboo, Wear, 259: 37-46.
18.
Hornsby, P.R. , Hinrichsen, E. and Traverdi, K. (1997). Preparation and Properties of Polypropylene Composites Reinforced With Wheat and Flax Straw Fibres. PartI. Characterisation, Journal of Materials Science, 32: 443-449.
19.
Pothan, L.A., Thomas, S. and Neelakantan, N.R. ( 1997). Short Banana Fibre Reinforced Polyester Composites: Mechanical, Failure and Aging Characteristics, Journal of Reinforced Plastics and Composites, 16: 744.
20.
Hepworth, D.G. , Bruce, D.M., Vincent, J.F.V. and Jeronimidis , G. (2000). The Manufacture and Mechanical Testing of Thermosetting Natural Fibre Composites , Journal of Materials Science, 35: 293-298.
21.
Hepworth, D.G. , Hobson, R.N., Bruce, D.M. and Farrent, J.W. (2000). The Use of Untreated Hemp in Composite Manufacture, Composites Part A, 31: 1279-1283.
22.
Joseph, P.V., Kuruvilla, J. and Thomas, S. ( 2002). Short Sisal Fibre Reinforced Polypropylene Composite: The Role of Interface Modification on Ultimate Properties, Composite Interfaces, 9(2): 171-205.
23.
Monteiro, S.N. , Rodriquez, R.J.S. and De Souza , M.V. (1998). Sugarcane Bagasse Waste as Reinforcement in Low Cost Composites, Advanced Performance Materials, 5: 183-191.
Tong, J., Ren, L.Q., Li, J.Q. and Chen, B.C. ( 1995). Abrasive Wear Behaviour of Bamboo, Tribology International, 28: 323-327.
26.
Yahou, T. and Sakamoto, S. ( 1993). Abrasive Properties of Bamboo, Japan Journal of Tribology, 38: 491-497.
27.
Chand, N. and Dwivedi, U.K. ( 2007). High Stress Abrasive Study on Bamboo, Journal of Material Processing and Technology, 183: 155-159.
28.
Chand, N., Dwivedi, U.K. and Acharya, S.K. ( 2007). Anisotropic Abrasive Wear Behaviour of Bamboo (Dentrocalamus strictus), Wear, 262(9/10): 1031-1037.
29.
El-Tayeb, N.S.M. (2008). A Study on the Potential of Sugarcane Fibers/Polyester Composite for Tribological Applications, Wear, 265(1-2): 223-235.
30.
Pavithran, C., Muckerjee, P.S., Brahmakumar, M. and Damodaran, A. (1987). Impact Properties of Natural Fibre Composites, Journal of Materials Science Letters , 7: 882-884.
Mahapatra, S.S. and Patnaik, A. (2007). Optimization of Wire Electrical Discharge Machining (WEDM) Process Parameters Using Taguchi Method , International Journal of Advanced Manufacturing Technology , 34: 911-925.
33.
Mahapatra, S.S., Patnaik, A. and Khan, M.S. (2006). Development and Analysis of Wear Resistance Model for Composites of Aluminium Reinforced With Redmud , The Journal of Solid Waste Technology and Management, 32(1): 28-35.
34.
Patnaik, A. , Biswas, S. and Mahapatra, S.S. (2007). An Evolutionary Approach for Parameter Optimization of Submerged Arc Welding in Hard Facing Process , International Journal of Manufacturing Research, 2(4): 462-483.
35.
Mahapatra, S.S., Patnaik, A., Satapathy, A. and Dash, R.R. (2008). Taguchi Method Applied to Parametric Appraisal of Erosion Behavior of GF-reinforced Polyester Composites , Wear, 265: 214-222.
36.
Patnaik, A. , Satapathy, A., Mahapatra, S.S. and Dash, R.R. (2008). A Modeling Approach for Prediction of Erosion Behavior of Glass Fiber-Polyester Composites, Journal of Polymer Research, 15(2): 147-160.
37.
Patnaik, A. , Satapathy, A., Mahapatra, S.S. and Dash, R.R. (2009). Modeling and Prediction of Erosion Response of Glass Reinforced Polyester-Flyash Composites, Journal of Reinforced Plastics and Composites, 28: 513-536.
38.
Glen, S.P. ( 1993). Taguchi Methods: A Hands on Approach, Addison-Wesley, New York.
