Effect of the SMA Trigger on the Energy Absorption Characteristics of CFRP Circular Tubes

Abstract

Quasi-static compressive tests were performed on carbon fiber reinforced polymer (CFRP) circular tubes to examine their axial crushing behaviors. Stable progressive crushing processes with brittle fracturing crushing mode were observed during the experiments. It is found that the crushing triggers including the ply drop off trigger and the shape memory alloy (SMA) trigger introduced in the specimens can efficiently initiate a stable progressive crushing process and significantly improve the specific energy absorption (SEA) as well as the crushing load efficiency (CLE) of the specimens. It is important to mention that the SMA trigger provides 37.2% increase of the SEA and 28.0% increase of the CLE, respectively, as compared with the specimens without a crushing trigger. Moreover, the SEA and the CLE of the composite tubes with the SMA trigger are 22.8% and 4.3% higher than those of specimens with the ply drop off trigger. In addition, the significant improvement of the SEA and the CLE is achieved with only a little increase of the initial peak-specific crushing stress.

Keywords

composites crashworthiness energy absorption shape memory alloy triggers axial crushing.

Get full access to this article

View all access options for this article.

References

Hull, D. ( 1991). A Unified Approach to Progressive Crushing of Fibre-Reinforced Composite Tubes, Composites Science and Technology , 40: 377-421.

Farley, G.L. and Jones, R.M. (1992). Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes, Journal of Composite Materials, 26(1): 37-50.

Mamalis, A.G. , Robinson, M. , Manolakos , D.E. , Demosthenous , D.A. , Ioannidis, M.B. and Carruthers, J. ( 1997). Crashworthy Capability of Composite Material Structures , Composite Structures, 37: 109-134.

Schultz, M.R. and Hyer, M.W. (2001). Static Energy Absorption Capacity of Graphite-Epoxy Tubes, Journal of Composite Materials , 35(19): 1747-1761.

Yi, X. , Xu, Y. , Tang, B. , Chen, Y. and Zhang, Z. ( 2004). Study on Energy Absorption Behavior of Composite Tubes and Integrated Manufacturing of Composite Structure, Journal of Materials Engineering, 9: 3-8 (in Chinese).

Chen, Y. , Xu, Y. and Yi, X. ( 2004). Influence of Trigger Mechanism on Axial Crashing Behavior of Carbon/Epoxy Circular Tubes, Journal of Materials Engineering , 12: 36-39 (in Chinese).

Chen, Y. , Yi, X. , Xu, Y. , Tang, B. and Zhang, Z. ( 2005). Static Energy Absorption Characteristics of Carbon-Epoxy Tubes, Acta Aeronautica et Astronautica Sinca, 26(2): 246-249 (in Chinese).

Botkin, M. , Johnson, N. , Zywicz, E. and Simunovic, S. ( 1998). Crashworthiness Simulation of Composite Automotive Structures , In: 13th Annual Engineering Society of Detroit Advanced Composite Technology Conference and Exposition, Detroit.

Ramakrishna, S. (1997). Microstructural Design of Composite Materials for Crashworthy Structural Applications, Materials & Design, 18(3): 167-173.

10.

Thornton, P.H. (1979). Energy Absorption in Composite Structures, Journal of Composite Materials, 13: 247-262.

11.

Thornton, P.H. (1982). Energy Absorption in Composite Tubes, Journal of Composite Materials, 16: 521-545.

12.

Farley, G.L. (1983). Energy Absorption of Composite Materials, Journal of Composite Materials, 17: 267-279.

13.

Sigalas, I. , Kumosa, M. and Hull, D. (1991). Trigger Mechanisms in Energy-Absorbing Glass Cloth/Epoxy Tubes, Composites Science and Technology, 40: 265-287.

14.

Thuis, H.G.S.J. and Metz, V.H. (1994). The Influence of Trigger Configuration and Laminate Lay-up on the Failure Mode of Composite Crush Cylinders , Composite Structures, 28(2): 131-137.

15.

Song, H.W. , Du, X.W. and Zhao, G.F. ( 2002). Energy Absorption Behavior of Double-Chamfer Triggered Glass/Epoxy Circular Tubes, Journal of Composite Materials , 36: 2183-2198.

16.

Thornton, P.H. (1985). Effect of Trigger Geometry on Energy Absorption of Composite Tubes, In: Harrington, W.C., Strife, J. and Dhingra, A.K. (eds), Proceedings of the 5th International Conference on Composite Materials (ICCM-V), pp. 1183-1199, Metallurgical Society, Warrendale, PA .

17.

Czaplicki, M.J. , Robertson, R.E. and Thornton, P.H. (1991). Comparison of Bevel and Tulip Triggered Pultruded Tubes for Energy Absorption , Composites Science and Technology, 40: 31-46.

18.

Gong, J. , Wang, X. and Wang, X.F. ( 2007). Study on Self-Adaptive Trigger Mechanism of Composite Tubes, In: World Forum of Smart Material and Smart Structure Technology, Chongqing and Nanjing, China.