Fabrication and Properties of Magnesium (AM50)-based Hybrid Composites with Graphite Nanofiber and Alumina Short Fiber

Abstract

In this article, an attempt has been made to the development of magnesium (AM50)-based hybrid composites with graphite nanofiber (GNFs)/alumina short fiber (Al₂O_3sf) hybrid preforms by infiltration method. The main objective of the present work is to investigate the effect of higher volume percentage of GNFs with the mechanical properties of the Mg/Al₂O_3sf composites system. Based on the SEM observations, it has been confirmed that the Al₂O_3sf are good dispersed within the matrix metal. However, the GNFs were formed agglomerated within the matrix metal due to the higher volume percentage of GNFs while preforming. The mechanical properties such as hardness, tensile strength, and compressive strength of composites improved upto a threshold of 10% volume fraction of fibers. When the volume fraction of fibers was above 10% the properties showed to decreasing trend due to the presence of GNFs agglomerations. In the present hybrid composites, even though GNFs existed as clusters their distribution within the array of Al₂O_3sf network are found to be relatively good. It suggests that a critical amount of GNFs agglomerates may actually be beneficial for the mechanical properties of the composites.

Keywords

magnesium hybrid composites mechanical properties.

Get full access to this article

View all access options for this article.

References

Hai, Z.Y. and Xing, Y.L. (2004). Review of Recent Studies in Magnesium Matrix Composites, Journal of Material Science , 39: 6153-6171.

Unverricht, R. , Peitz, V. , Riehemann, W. and Ferkel, H. ( 1998). Dispersion Strengthening of Magnesium by Nanoscaled Ceramic Particles, In: Proceedings on Magnesium Alloys and Their Applications Conference, Germany, pp. 327-332.

Ferkel, H. and Mordike, B.L. ( 2001). Magnesium Strengthened by SiC Nanoparticles, Materials and Science Engineering A, 298: 193-199.

Goha, C.S. , Lee, L.C. and Gupta, M. ( 2006). Simultaneous Enhancement in Strength and Ductility by Reinforcing Magnesium with Carbon Nanotubes, Material Science and Engineering A, 423: 153-156.

Nguyen, Q.B. and Gupta, M. ( 2008). Enhancing Compressive Response of AZ31B Magnesium Alloy Using Alumina Nanoparticulates, Composite Science and Technology , 68: 2185-2192.

Yong, Y. , Jie, L. and Xiaochun, L. ( 2004). Study on Bulk Aluminium Matrix Nanocomposites Fabricated by Ultrasonic Dispersion of Nano-sized SiC Particles in Molten Aluminium Alloy , Material Science and Engineering A, 380: 378-383.

Mason, J.F. , Warwick, C.M. , Smith, P. , Charles, J.A. and Clyne, T.W. ( 1989). Magnesium-Lithium Alloys in Metal Matrix Composites - A Preliminary Report, Journal of Material Science, 24: 3934-3946.

Schroder, J. and Kainer, K.U. ( 1991). Magnesium Based Hybrid Composites Prepared by Liquid Infiltration, Material Science and Engineering A, 135: 33-36.

Thakur, S.K. , Srivatsan, T.S. and Gupta, M. ( 2007). Synthesis and Mechanical Behaviour of Carbon Nanotube Magnesium Composites Hybridized with Nanoparticles of Alumina, Material Science and Engineering A, 466: 32-37.

10.

Qin, J. , Zhang, D. , Zhang , G. and Jin , Q. (2006). Mechanical Behaviour of a Hybrid Reinforced Magnesium Composites Fabricated by Pressure Infiltration Method, Key Engineering Materials , 313: 151-157.

11.

Babu, J.S.S. and Kang, C.G. ( 2008). Processing and Characterization of GNF/Al2O3sf Reinforced Aluminium Matrix Hybrid Composites. In: Proceedings of Recent Trends in Materials and Mechanical Engineering Conference, India , pp. 74-80.

12.

Cashion, S.P. , Ricketts, N.J. and Hayes, P.C. (2002). Characterization of Protective Surface Films Formed on Molten Magnesium Protected by Air/SH6 Atmosphere , Journal of Light Metals, 2: 37-42.

13.

Feng, W. and Jing, Z. ( 1997). Morphology of Second Phase Precipitates in Carbon Fiber and Graphite Fiber Reinforced Magnesium Based Metal Matrix Composites , Composite Science and Technology, 57: 661-667.

14.

Tao, K.B.K. , Singh, C. , Chhowalla , M. and Milne, W.I. (2003). Catalytic Synthesis of Carbon Nanotubes and Nanofibers, Encyclopedia of Nanoscience and Nanotechnology, 10: 1-22.

15.

Shimizu, Y. , Miki, S. and Soga, T. (2008). Multi-walled Carbon Nanotube Reinforced Magnesium Alloy Composites, Scripta Materialia , 58: 267-270.

16.

Mo, C.B. , Cha, S.I. , Kim , K.T. , Lee , K.H. and Hong, S.H. (2005). Fabrication of Carbon Nanotubes Reinforced Alumina Matrix Nanocomposites by Sol-gel Process, Material Science and Engineering A, 395: 124-128.

17.

Dieter, G.E. ( 1988). Mechanical Metallurgy , 1stedn, McGraw-Hill Book , London.

18.

Arsenault, R.J. (1984). The Strengthening of Al Alloy 6061 by Fiber and Plated SiC, Material Science and Engineering A, 64: 171-181.

19.

Zhan, G.D. , Kuntz, J.D. , Wan, J. and Mukherhee, A.K. ( 2003). Single-wall Carbon Nanotubes as Attractive Toughening Agents in Alumina Based Nanocomposites, Nature Materials, 2: 42.

20.

Schadler, L.S. , Giannaris, S.C. and Ajayan, P.M. (1998). Load Transfer in Carbon Nanotube Epoxy Composites, Applied Physics Letters, 73: 26-30.

21.

Barnett, M.R. (2007). Twinning and Ductility of Magnesium alloys Part II Contraction Twins, Material Science and Engineering A, 464: 8-16.