The bistability of unsymmetric cross-ply [0n/90n] T laminates has already been investigated in much detail. In this work a new type of bistable laminate is presented which has a symmetric lay-up. Bistability derives from an unsymmetric fiber prestress applied to the laminate. The experimental procedure used to apply this fiber prestress is presented in detail. Experimental results are compared with analytical and finite element models which have the ability to model fiber prestress accurately. As well as having minimal hygrothermal variability, it is noted that the snap-through loads for a prestressed symmetric laminate can be much higher than its unstressed [0n/90n]T equivalent.
Diaconu, C.G. , Weaver, P.M. and Mattioni, F. (2008). Concepts for Morphing Airfoil Sections Using Bistable Laminated Composite Structures, Thin-Walled Structures, 46(6): 689-701.
2.
Mattioni, F. , Weaver, P.M., Potter, K.D. and Friswell, M.I. (2008). Analysis of Thermally Induced Multistable Composites, International Journal of Solids and Structures, 45(2): 657-675.
3.
Daynes, S., Potter, K.D. and Weaver, P.M. ( 2008). Bistable Prestressed Buckled Laminates, Composites Science and Technology, 68(15-16): 3431-3437.
4.
Daynes, S., Weaver, P.M., Potter, K.D. and Hardick, M. ( 2009). Structure Which is Subject to Fluid Flow, UK Patent Application , 0902914.1.
5.
Hufenbach, W. , Gude, M. and Czulak, A. (2006). Actor-initiated Snap-through of Unsymmetric Composites with Multiple Deformation States, Journal of Materials Processing Technology, 175(1-3): 225-230.
6.
Hyer, M.W. ( 1981). Some Observations on the Cured Shapes of Thin Unsymmetric Laminates, Journal of Composite Materials, 15(2): 175-194.
7.
Hyer, M.W. ( 1982). The Room-temperature Shapes of Four-layer Unsymmetric Cross-ply Laminates, Journal of Composite Materials, 16(4): 318-340.
8.
Hamamoto, A. and Hyer, M.W. (1987). Non-linear Temperature-curvature Relationships for Unsymmetric Graphite-epoxy Laminates, International Journal of Solids Structures, 23(7): 919-935.
9.
Dano, M.L. and Hyer, M.W. ( 1998). Thermally-induced Deformation Behavior of Unsymmetric Laminates, International Journal of Solids Structures, 35(30): 2101-2120.
10.
Potter, K.D. and Weaver, P.M. ( 2004). A Concept for the Generation of Out-of-plane Distortion from Tailored FRP Laminates, Composites Part A: Applied Science and Manufacturing, 35(16): 1353-1361.
11.
Tuttle, M.E. ( 1988). A Mechanical/Thermal Analysis of Prestressed Composite Laminates, Journal of Composite Materials, 22(8): 780-792.
12.
Tuttle, M.E., Koehler, R.T. and Keren, D. ( 1996). Controlling Thermal Stresses in Composites by Means of Fibre Prestress, Journal of Composite Materials, 30(4): 486-502.
13.
Hadi, A.S. and Ashton, J.N. ( 1997). On the Influence of Pre-stress on the Mechanical Properties of a Unidirectional GRE Composite, Composite Structures, 40(3): 305-311.
14.
Motahhari, S. and Cameron, J. (1998). Impact Strength of Fiber Pre-stressed Composites, Journal of Reinforced Plastics and Composites, 17(2): 123-130.
15.
Krishnamurthy, S. ( 2006). Prestressed Advanced Fibre Reinforced Composites Fabrication and Mechanical Performance, PhD Thesis, Cranfield University ..
16.
Tsai, S.W. and Hahn, H.T. ( 1980). Appendix A, Introduction to Composite Materials, p. 440 , Technomic, Westport, Connecticut .
17.
MATLAB Version 7.2. (2006). The MathWorks, Inc. 3 Apple Hill Drive, Natick, MA01760-2098.
18.
Lawrence, C.M. , Nelson, D.V., Spingarn, J.R. and Bennett, T.E. (1996). Measurement of Process-induced Strains in Composite Materials using Embedded Fiber Optic Sensors, Proceedings of SPIE, San Diego, CA, 26 February, Vol. 2718, p. 60.
19.
Daniel, I.M. and Ishai, O. ( 2006). Hygrothermal Effects, In: Engineering Mechanics of Composite Materials, 2nd edn, pp. 204-208, Oxford University Press, New York.
Abaqus/CAE Version 6.6-1. (2006). Hibbitt, Karlson, & Sorensen, Inc., 2000, ABAQUS/ Standard User’s Manual, Pawtucket, RI, Version 6.1.
22.
Towse, A., Potter, K.D., Wisnom, M.R. and Adams, R.D. ( 1998). Specimen Size Effects in the Tensile Failure Strain of an Epoxy Adhesive, Journal of Materials Science, 33(30): 4307-4314.
23.
Gigliotti, M., Molimard, J., Jacquemin, F. and Vautrin, A. (2006). On the Nonlinear Deformations of Thin Unsymmetric 0/90 Composite Plates under Hygrothermal Loads, Composites Part A: Applied Science and Manufacturing, 37(4): 624-629.
24.
Potter, K.D. , Weaver, P.M., Seman, A.A. and Shah, S. (2007). Phenomena in the Bifurcation of Unsymmetric Composite Plates, Composites Part A: Applied Science and Manufacturing, 38(1): 100-106.
25.
Portela, P.M. , Camanho, P.P., Weaver, P.M. and Bond, I.P. (2008). Analysis of Morphing, Multi Stable Structures Actuated by Piezoelectric Patches, Computers and Structures, 86(3-5): 347-356.
26.
Etches, J.A. , Potter, K.D., Weaver, P.M. and Bond, I.P. (2009). Environmental Effects on Thermally Induced Multistability in Unsymmetric Composite Laminates,Composites Part A: Applied Science and Manufacturing, 40(8): 1240-1247.
