Characterization Methodology of Thermoset Resins for the Processing of Composite Materials

Abstract

The resin characterization is a key element in the manufacturing of composite materials. Resin processing properties and their associated constitutive models are essential in order to define and optimize the processing parameters and predict the final properties of a composite structure. In this article, a comprehensive methodology is presented to characterize the main processing properties of a thermoset resin system. As a case study, the thermal, chemorheological, and thermomechanical properties of the CYCOM 890RTM epoxy resin were investigated. A cure kinetics model taking into account the diffusion was found to accurately predict resin cure kinetics behavior within the processing condition range. The developed resin rheological model accurately predicted the onset of resin gelation and the evolution of resin viscosity with temperature and degree-of-cure. The glass transition temperature and instantaneous elastic modulus were determined using also a rheometer in a solid torsion mode. Finally, volumetric changes, resin chemical shrinkage and coefficient of thermal expansion were investigated taking into account the chemical and thermal effects. In general, the detailed procedure and techniques presented in this work can be applied to the intensive characterization of a wide range of thermoset resin systems.

Keywords

cure kinetics rheological behavior glass transition temperature volumetric changes.

Get full access to this article

View all access options for this article.

References

Mason, K.F. ( 2006). Autoclave Quality Outside the Autoclave? High-Performance Composites, 14(2): 44-49.

Fong, L. and Advani, S.G. ( 1998). Resin Transfer Moulding in Handbook of Composites, Chapman & Hall, London.

COMPRO Products. Available at: www.convergent.ca (accessed November 2009).

CYCOM 890RTM, Technical Data Sheet. Available at: www.cytec.com (accessed November 2009).

Yousefi, A. and Lafleur, P.G. ( 1997). Kinetic Studies of Thermoset Cure Reactions: A Review , Polymer Composites, 18(2): 157-168.

Hubert, P. , Johnston, A. , Poursartip, A. and Nelson, K. ( 2001). Cure Kinetics and Viscosity Models for Hexcel 8552 Epoxy Resin, In: International SAMPE Symposium and Exhibition (Proceedings), Vol. 46, pp. 2341-2354.

Halley, P.J. and Mackay, M.E. ( 1996). Chemorheology of Thermosets - An Overview, Polymer Engineering and Science, 36(5): 593-609.

Mezger, T.G. ( 2006). The Rheology Handbook: For Users of Rotational and Oscillatory Rheometers, 2nd edn, Vincentz Networks, Hannover, p. 161.

O’Brien, D.J. and White, S.R. (2003). Cure Kinetics, Gelation, and Glass Transition of a Bisphenol F Epoxide, Polymer Engineering and Science, 43(4): 863-874.

10.

Parker, M.J. ( 2000). Test Methods for Physical Properties in Comprehensive Composite Materials, Vol. 5, Elsevier Press, New York.

11.

Prasatya, P. , McKenna, G.B. and Sindee, S.L. (2001). A Viscoelastic Model for Predicting Isotropic Residual Stresses in Thermosetting Materials: Elects of Processing Parameters, Journal of Composite Materials, 35(10): 826-848.

12.

Sindee, S.L. , McKenna, G.B. and Sindt, O. (2000). Modeling the Evolution of the Dynamic Mechanical Properties of a Commercial Epoxy During Cure after Gelation, Journal of Applied Polymer Science, 76(4): 495-508.

13.

Pascault, J.P. and Williams, R.J.J. (1990). Glass Transition Temperature Versus Conversion Relationship for Thermosetting Polymers, Journal of Polymer Science Part B, 28(1): 85-95.

14.

Dykeman, D. and Poursartip, A. ( 2004). Process Maps for Design of Cure Cycles for Thermoset Matrix Composite Materials, In: 36th International SAMPE Technical Conference, San Diego.

15.

Hill, R. , Muzumar, S. and Lee, L. ( 1995). Analysis of Volumetric Change of Unsaturated Polyester Resin During Curing, Polymer Engineering and Science, 35(10): 852-859.

16.

Daniel, I.M. , Wang, T.-M. , Karalekas, D. and Gotro, J.T. (1990). Determination of Chemical Cure Shrinkage in Composite Laminates, Journal of Composites Technology and Research, 12930: 172-176.

17.

Yu, H. , Mhaisalkar, S.G. and Wong, E.H. ( 2005). Cure Shrinkage Measurement of Nonconductive Adhesives by Means of a Thermomechanical Analyzer, Journal of Electronic Materials, 34(8): 1177-1182.

18.

Schoch, K.F. , Panackal, P.A. and Franck, P.P. (2004). Real-time Measurement of Resin Shrinkage During Cure, Thermomech Acta, 417: 115-118.

19.

Watts, D.C. and Cash, J.E. (1991). Kinetic Measurements of Photo-polymerization Contraction in Resins and Composites, Measurement Science and Technology, 2: 788-794.

20.

Thomas, C.L. and Bur, A.J. (1999). In-situ Monitoring of Product Shrinkage During Injection Molding Using an Optical Sensor, Polymer Engineering and Science, 39(9): 1619-1627.

21.

Li, C. , Potter, K. , Wisnom, M.R. and Stringer, G. ( 2004). In-situ Measurement of Chemical Shrinkage of MY750 Epoxy Resin by a Novel Gravimetric Method, Composite Science and Technology, 64: 55-64.

22.

Haider, M. , Hubert, P. and Lessard, L. ( 2007). Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives, Composites: Part A , 38(3): 994-1009.

23.

Ruiz, E. and Trochu, F. ( 2005). Thermomechanical Properties during Cure of Glass-Polyester RTM Composites: Elastic and Viscoelastic Modeling, Journal of Composite Materials, 39(10): 881-916.

24.

Curiel, T.M. and Fernlund, G. ( 2005). Stress Build-up in Bonded Composite Patch Repair, In: Proceedings of the American Society for Composites Twentieth Technical Conference, Philadelpia.

25.

Bogetti, T.A. and Gillespie Jr, J.W. (1992). Process-Induced Stress and Deformation in Thick Section Thermoset Composite Laminates, Journal of Composite Materials, 26(5): 626-660.

Characterization Methodology of Thermoset Resins for the Processing of Composite Materials — Case Study: CYCOM 890RTM Epoxy Resin

Abstract

Keywords

Get full access to this article

References