Synergy Effects of Conductive Fillers on Elastomer Graphite Composite Material for PEM Fuel Cell Bipolar Plates

Abstract

Bipolar plates are necessary components in the current design of polymer electrolyte membrane (PEM) fuel cell stacks. The aim of this study is to investigate the elastomeric material with the addition of different types of graphite conductive fillers for the potential use as a bipolar plate in a PEM fuel cell stack. The conductive fillers investigated here include Cytec thermal graphite fibers, Asbury Carbons PAN AGM 99 fiber, synthetic graphite (4012), natural flake (3763), and different grades of graphite powder (TC 305). Some of these conductive fillers are implemented in a two component silicone slurry matrix (RTV 627 by Momentive Performance Materials) to make a composite material. The synergy effects between different fillers in a composite are studied through the percolation theory and scanning electron microscopy images. It has been found that binary blends of fillers resulted in lower resistivity values than individual components over wide composition ratios. A bulk electrical resistivity of 0.0310 Ω cm is achieved for the composite containing 28% by volume DKD fiber and 7% synthetic graphite flake (Asbury 4012) mixed in the elastomeric matrix.

Keywords

bipolar plates PEM fuel cell composite materials.

Get full access to this article

View all access options for this article.

References

The Hydrogen Pathway (2005 ). Innovative Concepts for Bipolar Plates, CLEFS CE, 50/51: 76-89.

Vieltich, W. , Gasteiger, H.A. and Lamm, A. ( 2003). Handbook of Fuel Cells - Fundamentals, Technology and Applications, John Wiley & Sons, New York.

O’Hayre, R. , Cha, S. , Colella, W. and Prinz, F.B. ( 2006). Fuel Cell Fundamentals, John Wiley & Sons, New York.

Mehta, V. and Cooper, J.S. ( 2003). Review and Analysis of PEM Fuel Cell Design and Manufacturing , Journal of Power Sources, 114: 32-53.

Müller, A. , Kauranen, P. , Von Ganski, A. and Hell, B. (2006). Injection Moulding of Graphite Composite Bipolar Plates, Journal of Power Sources , 154: 467-471.

Mighri, F. , Huneault, M.A. and Champagne, M.F. ( 2004). Electrically Conductive Thermoplastic Blends for Injection and Compression Molding of Bipolar Plates in the Fuel Cell Application , Polymer Engineering and Science, 40(9): 1755-1765.

Wu, M. and Shaw, L. ( 2005). Electrical and Mechanical Behaviors of Carbon Nanotube-filled Polymer Blends, Wiley InterScience, New York.

Greenberg, E.R. , May, M.N. , Wise, J. and Gadala-Maria , F. (2005). Effect of Shear on the Electrical Conductivity of Suspensions of Graphite in an Unsaturated Polyester Resin, Polymer Engineering and Science, 45(11): 1540-1545.

Huang, J. , Baird, D.G. and McGrath, J.E. ( 2005). Development of Fuel Cell Bipolar Plates from Graphite Filled Wet-lay Thermoplastic Composite Materials, Journal of Power Sources, 150: 110-119.

10.

Hermann, A. , Chaudhuri, T. and Spagnol, P. (2005). Bipolar Plates for PEM Fuel Cells: A Review, International Journal of Hydrogen Energy , 30(12): 1297-1302.

11.

Jousse, F. , Salas, J.F. , Giroud, F. , Icard, B. , Laurent, J.Y. and Serre Combe, P. ( 2000). Development of New Bi-polar Plates Based on Electrically Conductive Filled Polymers for PEMFC, EUROMAT 99, Wiley InterScience, New York.

12.

Bin, Z. , Bingchu, M. , Chunhui , S. and Runzhang, Y. (2006). Study on the Electrical and Mechanical Properties of Polyvinylidene Fluoride/Titanium Silicon Carbide Composite Bipolar Plates, Journal of Power Sources, 161(2): 997-1001.

13.

Yen, C.-Y. , Liao, S.-H. , Lin , Y.-F. , Hung, C.-H. , Lin , Y.-Y. and Ma , C.-C.M. (2006). Preparation and Properties of High Performance Nanocomposite Bipolar Plate for Fuel Cell, Journal of Power Sources, 162(1): 309-315.

14.

Kuan, H.-C. , Ma, C.-C.M. , Chen, K.H. and Chen, S-M. (2004). Preparation, Electrical, Mechanical and Thermal Properties of Composite Bipolar Plate for a Fuel Cell , Journal of Power Sources, 134: 7-17.

15.

Besmann, T.M. , Klett, J.W. , Henry Jr, J.J. and Lara-Curzio , E. (2001). Carbon/Carbon Composite Bipolar Plate for PEM Fuel Cells, Society of Automotive Engineers, Inc., 02FCC-14.

16.

Hudak, G.A. (2005). Fuel Cell Technology and Its Importance to Society, Tech Directions, 65(1): 25-27.

17.

Tamashausky, A. (2007). Asbury Carbons. Available at: http://www.asbury.com/ (accessed May 8, 2007)

18.

Petrach, E. , Abu-Isa, I. and Wang, X. ( 2009). Investigation of Elastomer Graphite Composite Material for PEM Fuel Cell Bipolar Plate, Journal of Fuel Cell Science and Technology, 6(3): 031005-1-031005-6.

19.

Momentive Performance Materials Technical Data (2008 ). Available at: www.gesilicones.com (accessed September 9, 2008).

20.

Frisch, L. ( 2001). PEM Fuel Cell Stack Sealing Using Silicone Elastomers , Sealing Technology, 93: 7-9.

21.

Strong, B.A. ( 2006). Plastics Materials and Processing, Prentice Hall, New Jersey.

22.

Cytec Industries Inc. (2007). Available at: http://www.cytec.com (accessed May 8, 2007 ).

23.

Barbir, F. ( 2005). PEM Fuel Cells: Theory and Practice, Elsevier Inc, New York.

24.

Ota, T. , Fukushima, M. , Ishigure, Y. , Unuma, H. , Takahashi, M. , Hikichi, Y. and Suzuki, H. ( 1997). Control of Percolation Curve by Filler Particle Shape in Cu-SBR Composites, Journal of Materials Science Letter , 16: 1182-1183.

25.

Garboczi, E.J. , Snyder, K.A. , Douglas, J.F. and Thorpe, M.F. (1995). Geometrical Percolation Threshold of Overlapping Ellipsoids, Physical Review E, 52(1): 819-828.

26.

Cai, W.-Z. , Tu, S.-T. and Gong, J.-M. (2006). A Physically Based Percolation Model of the Effective Electrical Conductivity of Particle Filled Composites, Journal of Composite Materials , 40(23): 2131-2142.