Compressive behaviors of 2D basalt fiber laminated plain woven composite and 3D basalt fiber orthogonal woven composite were tested under various strain rates with a split Hopkinson pressure bar (SHPB) apparatus and universal material test system (MTS 810.23). Compressive stress—strain curves were obtained at strain rates ranging from 0.001 to 3500 s-1. The compressive curves exhibited strong strain-rate sensitivity. Compression modulus and failure stress of the 2D woven composite are both greater than those of the 3D woven composite under the same strain rate. The main failure mode of the 2D woven composite is delamination both along in-plane direction and through thickness direction. As the impact velocity increases, the 2D woven composite will be in debris owing to the resin cracks, whereas for that of the 3D orthogonal woven, there is no delamination between each layer because of the binds of Z-yarns. The 3D woven composite will also be in debris under high strain rate compression when the Z-yarns break.
Deak, T. and Czigany, T. ( 2009). Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison, Textile Research Journal, 79(7): 645-651.
2.
Militky, J. and Kovacic, V. ( 1996). Ultimate Mechanical Properties of Basalt Filaments, Textile Research Journal, 66(4): 225-229.
3.
Kuo, W.S. and Lee, L.C. (1999). Elastic and Damage Behavior of Three-Dimensional Woven Composites Incorporating Solid Rods, Composites Part A, 30(10): 1135-1148.
4.
Baucom, J.N. and Zikry, M.A. ( 2003). Evolution of Failure Mechanisms in 2-D and 3-D Woven Composite Systems Under Quasi-Static Perforation, Journal of Composite Materials, 37(18): 1651-1674.
5.
Naik, N.K., Azad, S.N.M., Prasad, P.D. and Thuruthimattam, B.J. ( 2001). Stress and Failure Analysis of 3-D Orthogonal Interlock Woven Composites, Journal of Reinforced Plastics and Composites , 20(17): 1485-1523.
6.
Hosur, M.V., Abraham, A., Jellani, S. and Vaidya, U.K. ( 2001). Studies on the Influence of Through-the-Thickness Reinforcement on Low-Velocity and High Strain Rate Response of Woven S2-Glass/Vinyl Ester Composites, Journal of Composite Materials, 35(12): 1111-1133.
7.
Hosur, M.V., Alexander, J., Jeelani, S., Vaidya, U.K. and Mayer, A. ( 2003). High Strain Compression Response of Affordable Woven Carbon/Epoxy Composites, Journal of Reinforced Plastics and Composites, 22(3): 271-296.
8.
Hosur, M.V., Adya, M., Vaidya, U.K., Mayer, A. and Jeelani, S. ( 2003). Effect of Stitching and Weave Architecture on the High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites , Composite Structures, 59(4): 507-523.
9.
Hosur, M.V., Alexander, J., Vaidya, U.K., Jeelani, S. and Mayer, A. ( 2003). High Strain Rate Compression Characterization of Affordable Woven Carbon/Epoxy Composites Under Off-Axis Loading, Polymers & Polymer Composites, 11(7): 527-539.
10.
Hosur, M.V. , Islam, S.M.W., Vaidya, U.K., Dutta, P.K. and Jeelani, S. (2004). Experimental Studies on the Punch Shear Characterization of Satin Weave Graphite/Epoxy Composites at Room and Elevated Temperatures, Materials Science and Engineering A, 368(1-2): 269-279.
11.
Hosur, M.V. , Islam, S.M.W., Vaidya, U.K., Kumar, A., Dutta, P.K. and Jeelani, S. (2005). Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures , Composite Structures, 70(3): 295-307.
12.
Khan, A.S., Colak, O.U. and Centala, P. ( 2002). Compressive Failure Strengths and Modes of Woven S2-Glass Reinforced Polyester due to Quasi-Static and Dynamic Loading, International Journal of Plasticity, 18(10): 1337-1357.
13.
Haque, A. and Hossain, M.K. ( 2003). Effects of Moisture and Temperature on High Strain Rate Behavior of S2-Glass-Vinyl Ester Woven-Composites, Journal of Composite Materials, 37(7): 627-647.
14.
Naik, N.K., Sekher, Y.C. and Meduri, S. ( 2000). Damage in Woven-Fabric Composites Subjected to Low-Velocity Impact, Composites Science and Technology, 60(5): 731-744.
15.
Naik, N.K., Sekher, Y.C. and Meduri, S. ( 2000). Polymer Matrix Woven Fabric Composites Subjected to Low Velocity Impact: Part I - Damage Initiation Studies, Journal of Reinforced Plastics and Composites, 19(12): 912-954.
16.
Naik, N.K., Meduri, S. and Sekher, Y.C. ( 2000). Polymer Matrix Woven Fabric Composites Subjected to Low Velocity Impact: Part II - Effect of Plate Thickness, Journal of Reinforced Plastics and Composites, 19(13): 1031-1055.
17.
Naik, N.K. and Meduri, S. ( 2001). Polymer-Matrix Composites Subjected to Low-Velocity Impact: Effect of Laminate Configuration, Composites Science and Technology , 61(10): 1429-1436.
18.
Bahei-El-Din, Y.A., Zikry, M.A. and Rajendran , A.M. (2003). Impact-Induced Deformation Fields in 3-D Cellular Woven Composites, Composites Part A, 34(8): 765-778.
19.
Bahei-El-Din, Y.A., Rajendran, A.M. and Zikry, M.A. (2004). A Micromechanical Model for Damage Progression in Woven Composite Systems, International Journal of Solids and Structures, 41(9-10): 2307-2330.
20.
Shahkarami, A. and Vaziri, R. (2007). A Continuum Shell Finite Element Model for Impact Simulation of Woven Fabrics, International Journal of Impact Engineering, 34(1): 104-119.
21.
Sun, B.Z. and Gu, B.H. (2006). Shear Behavior of 3-D Orthogonal Woven Fabric Composites Under High Strain Rates, Journal of Reinforced Plastics and Composites, 25(17): 1833-1845.
22.
Luo, Y.S. , Lv, L.H., Sun, B.Z., Qiu, Y.P. and Gu, B.H. (2007). Transverse Impact Behavior and Energy Absorption of Three-Dimensional Orthogonal Hybrid Woven Composites , Composite Structures, 81(2): 202-209.
23.
Ji, K.H. and Kim, S.J. ( 2007). Dynamic Direct Numerical Simulation of Woven Composites for Low-Velocity Impact, Journal of Composite Materials, 41(2): 175-200.
24.
Ji, C.G., Sun, B.Z., Qiu, Y.P. and Gu, B.H. ( 2008). Impact Damage of 3-D Orthogonal Woven Composite Circular Plates, Applied Composite Materials, 14(5-6): 343-362.
25.
Hao, A.Y. , Sun, B.Z., Qiu, Y.P. and Gu, B.H. (2008). Dynamic Properties of 3-D Orthogonal Woven Composite T-Beam Under Transverse Impact, Composites Part A, 39(7): 1073-1082.
26.
Lv, L.H. and Gu, B.H. ( 2008). Transverse Impact Damage and Energy Absorption of 3-D Orthogonal Hybrid Woven Composite: Experimental and FEM Simulation, Journal of Composite Materials, 42(17): 1763-1786.
27.
He, C.G. , Li, Y.B., Zhang, Z.G. and Sun, Z.J. (2008). Impact Damage Modes and Residual Flexural Properties of Composites Beam, Journal of Reinforced Plastics and Composites, 27(11): 1163-1175.
28.
Wang, X., Hu, B., Feng, Y.N., Liang, F., Mo, J., Xiong, J. and Qiu, Y.P. ( 2008). Low Velocity Impact Properties of 3-D Woven Basalt/Aramid Hybrid Composites, Composites Science and Technology, 68(2): 444-450.
29.
Meyers, M.A. ( 1994). Experimental Techniques: Methods to Produce Dynamic Formation, Dynamic Behavior of Materials, pp. 296-322, John Wiley & Sons, New York.
30.
Sun, B.Z. , Gu, B.H. and Ding, X. (2005). Compressive Behavior of 3-D Angle-Interlock Woven Fabric Composites at Various Strain Rates, Polymer Testing, 24: 447-454.
31.
Sun, B.Z. and Gu, B.H. (2007). High Strain Rate Behavior of 4-Step 3-D Braided Composites under Compressive Failure, Journal of Materials Science, 42(7): 2463-2470.
32.
Sun, B.Z. , Hu, H. and Gu, B.H. (2007). Compressive Behavior of Multi-Axial Multi-Layer Warp Knitted (MMWK) Fabric Composite at Various Strain Rates, Composite Structures, 78(1): 84-90.
33.
Tong, L., Mouritz, A.P. and Bannister, M.K. ( 2002). 3D Fibre Reinforced Polymer Composites, pp. 107-136, Elsevier Science Ltd, The Boulevard, Langford Lane, Kidlington, Oxford OX5 IGB, UK.
34.
Callus, P.J. , Mouritz, A.P., Bannister, M.K. and Leong, K.H. (1999). Tensile Properties and Failure Mechanisms of 3D Woven GRP Composites, Composites Part A, 30(11): 1277-1287.
35.
Cox, B.N. , Carter, W.C. and Fleck, N.A. (1994). A Binary Model of Textile Composites I: Formulation, Acta Metallurgica et Materialia , 42(10): 3463-3479.
36.
Lee, B. , Leong, K.H. and Herszberg , I. (2001). The Effect of Weaving on the Tensile Properties of Carbon Fibre Tows and Woven Composites, Journal of Reinforced Plastics and Composites , 20(8): 652-670.
