For three 3D woven carbon fiber reinforcements with different architectures, the compressibility, geometrical structure, and permeability were studied. At low levels of compression, the thickness of an angle-interlock weave is reduced mainly by local reduction of the height of inter-bundle voids and permanent reordering of the fiber bundles. At higher compression levels, bundle compaction is dominant. For an orthogonal weave fabric, the main compression mechanism is compaction of the fiber bundles. The in-plane permeability is modeled by superimposing a disturbance, caused by the binder yarns, to the permeability of a regular layered fiber structure. It is characterized mainly by the dimensions of the inter-bundle voids in each layer, and the pattern and dimensions of the binder yarns. Because of the dependence on the inter-bundle void dimensions, the fabric compression behavior is reflected. The through-thickness permeability is determined by flow-enhancing channels in the structure of the reinforcement, formed around the binder yarns. It is modeled as a function of the number of binder yarns per unit surface area, and the dimensions and orientation of the binder yarns.
Mouritz, A.P. , Bannister, M.K., Falzon, P.J. and Leong, K.H. (1999). Review of Applications for Advanced Three-dimensional FiberTextile Composites, Composites - Part A: Applied Science and Manufacturing, 30(12): 1445-1461.
2.
Tan, P., Tong, L., Steven, G.P. and Ishikawa, T. ( 2000). Behavior of 3D Orthogonal Woven CFRP Composites. Part I. Experimental Investigation, Composites - Part A: Applied Science and Manufacturing, 31(3): 259-271.
3.
Tan, P., Tong, L. and Steven, G.P. ( 2000). Behavior of 3D Orthogonal Woven CFRP Composites. Part II. FEA and Analytical Modeling Approaches, Composites - Part A: Applied Science and Manufacturing, 31(3): 273-281.
4.
Luo, Y., Lv, L., Sun, B., Qiu, Y. and Gu, B. ( 2007). Transverse Impact Behavior and Energy Absorption of Three-dimensional Orthogonal Hybrid Woven Composites, Composite Structures, 81(2): 202-209.
5.
Mohamed, M.H. and Wetzel, K.K. (2006). 3D Woven Carbon/Glass Hybrid Spar Cap for Wind Turbine Rotor Blade, Journal of Solar Energy Engineering - Transactions of the ASME, 128(4): 562-573.
6.
Kamiya, R., Cheeseman, B.A., Popper, P. and Chou, T.W. ( 2000). Some Recent Advances in the Fabrication and Design of Three-dimensional Textile Preforms: A Review, Composites Science and Technology, 60(1): 33-47.
7.
Chiu, C.H. and Cheng, C.C. ( 2003). Weaving Method of 3D Woven Preforms for Advanced Composite Materials, Textile Research Journal, 73(1): 37-41.
8.
Rudov-Clark, S., Mouritz, A.P., Lee, L. and Bannister, M.K. (2003). Fiber Damage in the Manufacture of Advanced Three-dimensional Woven Composites, Composites - Part A: Applied Science and Manufacturing, 34(10): 963-970.
9.
Parnas, R.S. , Flynn, K.M. and Dal-Favero , M.E. (1997). A Permeability Database for Composites Manufacturing, Polymer Composites, 18(5): 623-633.
10.
Potluri, P. and Sagar, T.V. (2008). Compaction Modeling of Textile Preforms for Composite Structures, Composite Structures , 86(1-3): 177-185.
11.
Mohamed, M. ( 2004). 3D Woven Carbon-Glass Hybrid Wind Turbine Blades, Wind Turbine Blade Workshop, Albuquerque.
12.
Ngo, N.D. and Tamma, K.K. (2004). Complex Three-dimensional Microstructural Permeability Prediction of Porous Fibrous Media With and Without Compaction, International Journal for Numerical Methods in Engineering, 60(10): 1741-1757.
13.
Song, Y.S., Chung, K., Kang, T.J. and Youn, J.R. ( 2004). Prediction of Permeability Tensor for Three Dimensional Circular Braided Preform by Applying a Finite Volume Method to a Unit Cell , Composites Science and Technology, 64(10-11): 1629-1636.
14.
Desplentere, F., Lomov, S., Woerdeman, D., Verpoest, I., Wevers, M. and Bogdanovich , A. (2005). Micro-CT Characterization of Variability in 3DTextile Architecture, Composites Science and Technology, 65(13): 1920-1930.
15.
Endruweit, A., Matthys, K., Peiro, J. and Long, A.C. (2009). The Effect of Differential Compression on the In-plane Permeability Tensor of Heterogeneous Multi-layer Carbon Fiber Preforms, Plastics, Rubber and Composites: Macromolecular Engineering, 38(1): 1-9.
16.
Trevino, L. , Rupel, K., Young, W.B., Liou, M.J. and Lee, L.J. (1991). Analysis of Resin Injection Molding in Molds with Preplaced Fiber Mats. I: Permeability and Compressibility Measurements, Polymer Composites, 12(1): 20-29.
17.
Robitaille, F. and Gauvin, R. (1998). Compaction of Textile Reinforcements for Composites Manufacturing. I: Review of Experimental Results, Polymer Composites, 19(2): 198-216.
18.
Saunders, R.A. , Lekakou, C. and Bader, M.G. (1998). Compression and Microstructure of Fiber Plain Woven Cloths in the Processing of Polymer Composites, Composites - Part A: Applied Science and Manufacturing, 29(4): 443-454.
19.
Chen, B., Lang, E.J. and Chou, T.W. ( 2001). Experimental and Theoretical Studies of Fabric Compaction Behavior in Resin Transfer Molding, Materials Science and Engineering: A, 317(1-2): 188-196.
20.
Somashekar, A.A. , Bickerton, S. and Bhattacharyya , D. (2006). An Experimental Investigation of Non-elastic Deformation of Fibrous Reinforcements in Composites Manufacturing, Composites - Part A: Applied Science and Manufacturing, 37(6): 858-867.
21.
Carman, P.C. ( 1937). Fluid Flow through Granular Beds, Transactions of the Institution of Chemical Engineers, 15: 150-156.
22.
Adams, K.L. and Rebenfeld, L. ( 1991). Permeability Characteristics of Multilayer Fiber Reinforcements . Part I: Experimental Observations, Polymer Composites, 12(3): 179-185.
23.
Adams, K.L. and Rebenfeld, L. ( 1991). Permeability Characteristics of Multilayer Fiber Reinforcements . Part II: Theoretical Model, Polymer Composites, 12(3): 186-190.
24.
Gebart, B.R. (1992). Permeability of Unidirectional Reinforcements for RTM, Journal of Composite Materials, 26(8): 1100-1133.
25.
Cai, Z. and Berdichevsky, A.L. (1993). An Improved Self-consistent Method for Estimating the Permeability of a Fiber Assembly, Polymer Composites, 14(4): 314-323.
26.
Griffin, P.R. , Grove, S.M., Russell, P., Short, D., Summerscales, J., Guild, F.J. and Taylor, E. (1995). The Effect of Reinforcement Architecture on the Long-range Flow in Fibrous Reinforcements, Composites Manufacturing, 6(3-4): 221-235.
27.
Van der Westhuizen, J. and Du Plessis, J.P. (1996). An Attempt to Quantify Fiber Bed Permeability Utilizing the Phase Average Navier-stokes Equation , Composites - Part A: Applied Science and Manufacturing, 27(4): 263-269.
28.
Shih, C.H. and Lee, L.J. ( 1998). Effect of Fiber Architecture on Permeability in Liquid Composite Molding, Polymer Composites, 19(5): 626-639.
29.
Lundström, T.S. (2000). The Permeability of Non-crimp Stitched Fabrics, Composites - Part A: Applied Science and Manufacturing, 31(12): 1345-1353.
30.
Endruweit, A. and Ermanni, P. (2002). Influence of Fixation Structures on the In-plane Permeability of Unidirectional Glass Fiber Tapes , Journal of Composite Materials, 36(16): 1993-2010.
31.
Ni, J., Zhao, Y., Lee, L.J. and Nakamura, S. ( 1997). Analysis of Two-regional Flow in Liquid Composite Molding , Polymer Composites, 18(2): 254-269.
32.
Endruweit, A., McGregor, P., Long, A.C. and Johnson, M.S. (2006). Influence of the Fabric Architecture on the Variations in Experimentally Determined In-plane Permeability Values, Composites Science and Technology, 66(11-12): 1778-1792.
33.
Bickerton, S., Advani, S.G., Mohan, R.V. and Shires, D.R. (2000). Experimental Analysis and Numerical Modeling of Flow Channel Effects in Resin Transfer Molding, Polymer Composites, 21(1): 134-153.
34.
Pillai, K.M. (2004). Modeling the Unsaturated Flow in Liquid Composite Molding Processes: A Review and Some Thoughts, Journal of Composite Materials, 38(23): 2097-2118.
35.
Goulley, G., Pitard, P. and Pabiot, J. ( 1993). Longitudinal and Transversal Permeability Measurement of Glass Fiber Reinforcement for the Modeling of Flow in RTM, In: Proceedings of the 6th European Conference on Composite Materials , Bordeaux, 20-24 September, pp. 83-88.
36.
Drapier, S. , Pagot, A., Vautrin, A. and Henrat, P. (2002). Influence of the Stitching Density on the Transverse Permeability of Non-crimped New Concept (NC2) Multiaxial Reinforcements: Measurements and Prediction, Composites Science and Technology, 62(15): 1979-1991.
