Organoclay, precisely montmorillonite, is modified with octadecylamine and then its surface is individually treated by silane coupling agents, DB550, DB580, and DB619. The nitrile butadiene rubber (NBR) is mechanically mixed with organophilic clay via melt blending method. Characterizations of prepared hybrids based on NBR-organoclay treated by silane coupling agents are investigated on such aspects as X-ray diffraction (XRD), scanning electron microscopy, infrared spectra, mechanical properties, and dynamic mechanical analysis (DMA). The XRD result shows that layered silicates are intercalated by polymer chains. The nanocomposites with coupling agent DB580 or DB619 have superior mechanical properties in comparison with conventional composites and ordinary nanocomposites. Apart from a limited increase in tensile stress at small strains, the ultimate stress at rupture of the nanocomposites is much higher than that of microcomposites. It is presumed that these enhancements are attributed not only to the more uniform dispersion of nanoparticles of organoclay into the polymer matrix but also to the coupling agent bond or micro-adhesion between the NBR matrix and the organoclay.
Ray, S.S. and Okamoto, M. (2003). Polymer/Layered Silicate Nanocomposites: A Review from Preparation to Processing, Progress in Polymer Science, 28(11): 1539-1641.
2.
Kumar, A.P., Depan, D., Tomer, N. and Singh, R.P. ( 2009). Nanoscale Particles for Polymer Degradation and Stabilization - Trends and Future Perspectives, Progress in Polymer Science , 34(6): 479-515.
3.
Khan, A., Shamsi, M.H. and Choi, T. ( 2009). Correlating Dynamical Mechanical Properties with Temperature and Clay Composition of Polymer-Clay Nanocomposites, Computational Materials Science, 45(2): 257-265.
4.
Zulfiqar, S., Ahmad, Z. and Sarwar, M.I. ( 2008). Preparation and Properties of Aramid/Layered Silicate Nanocomposites by Solution Intercalation Technique, Polymers for Advanced Technologies, 19(12): 1720-1728.
5.
Nguyen, Q.T. and Baird, D.G. ( 2006). Preparation of Polymer-Clay Nanocomposites and their Properties, Advances in Polymer Technology, 25(4): 270-285.
6.
Vu, H., Vermogen, A., Gauthier, C., Masenelli-Varlot, K. and Cavaillé, J. ( 2008). Microstructure and Fracture Behavior of Semicrystalline Polymer-Clay Nanocomposites, Journal of Polymer Science Part B: Polymer Physics, 46(17): 1820-1836.
7.
Fournaris, K.G. , Boukos, N. and Petridis, D. (2001). Aqueous Polymerization of Protonated 4-Vinylpyridine in Montmorillonite, Applied Clay Science, 19(1-6): 77-88.
8.
Okamoto, M., Morita, S., Taguchi, H., Kim, Y.H., Kotaka, T. and Tateyama, H. ( 2000). Synthesis and Structure of Smectic Clay/Poly(Methyl Methacrylate) and Clay/Polystyrene Nanocomposites via in situ Intercalative Polymerization , Polymer, 41(10): 3887-3890.
9.
Varley, R.J. , Groth, A.M. and Leong, K.H. (2008). Preparation and Characterisation of Polyamide-Polyimide Organoclay Nanocomposites, Polymer International, 57(4): 618-625.
10.
Hamdani, S. , Longuet, C., Perrin, D., Lopez-cuesta, J. and Ganachaud, F. (2009). Flame Retardancy of Silicone-based Materials, Polymer Degradation and Stability, 94(4): 465-495.
11.
Utracki, L.A. , Sepehr, M. and Boccaleri, E. (2007). Synthetic, Layered Nanoparticles for Polymeric Nanocomposites (PNCs), Polymers for Advanced Technologies, 18(1): 1-37.
12.
Lai, S.M. , Chen, W.C. and Zhu, X.S. (2009). Melt Mixed Compatibilized Polypropylene/Clay Nanocomposites: Part 1 - the Effect of Compatibilizers on Optical Transmittance and Mechanical Properties, Composites Part A: Applied Science and Manufacturing, 40(6-7): 754-765.
13.
Lew, C.Y. , Murphy, W.R. and Mcnally, G.M. (2004). Exfoliation Kinetics of a Phyllosilicate-Organoclay Structure in a Polymer Matrix During Melt-extrusion Process, Developments in Chemical Engineering and Mineral Processing, 12(1-2): 149-158.
14.
Zhang, X. and Loo, L.S. ( 2009). Synthesis and Thermal Oxidative Degradation of a Novel Amorphous Polyamide/Nanoclay Nanocomposite, Polymer, 50(12): 2643-2654.
15.
Ahmadi, S.J. , Huang, Y., Ren, N., Mohaddespour, A. and Ahmadi-Brooghani , S.Y. (2009). The Comparison of EPDM/Clay Nanocomposites and Conventional Composites in Exposure of Gamma Irradiation, Composites Science and Technology , 69(7-8): 997-1003.
16.
Mondragón, M., Hernández , E.M., Rivera-Armenta, J.L. and Rodríguez-González, F.J. (2009). Injection Molded Thermoplastic Starch/Natural Rubber/Clay Nanocomposites: Morphology and Mechanical Properties, Carbohydrate Polymers, 77(1): 80-86.
17.
Mohaddespour, A., Ahmadi, S.J., Abolghasemi, H. and Jafari, S. (2007). The Investigation of Mechanical, Thermal and Chemical Properties of HDPE/PEG/OMT Nanocomposites , Applied Science, 7(18): 2591-2597.
18.
Pettarin, V. , Frontini, P.M., Rodriguez Pita , V.J.R., Dias, M.L. and Diaz, F.V. (2008). Polyethylene/(Organo-montmorillonite) Composites Modified with Ethylene/Methacrylic Acid Copolymer: Morphology and Mechanical Properties, Composites Part A: Applied Science and Manufacturing, 39(12): 1822-1828.
19.
Rajasekar, R. , Pal, K., Heinrich, G., Das, A. and Das, C.K. (2009). Development of Nitrile Butadiene Rubber-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer , Materials and Design, 30(9): 3839-3845.
20.
Liu, L., Jia, D., Luo, Y. and Guo, B. ( 2006). Preparation, Structure and Properties of Nitrile-butadiene Rubber-Organoclay Nanocomposites by Reactive Mixing Intercalation Method, Journal of Applied Polymer Science, 100(3): 1905-1913.
21.
Kim, J., Oh, T. and Lee, D. ( 2003). Morphology and Rheological Properties of Nanocomposites Based on Nitrile Butadiene Rubber and Organophilic Layered Silicates, Polymer International, 52(7): 1203-1208.
22.
Kim, J., Oh, T. and Lee, D. ( 2004). Curing and Barrier Properties of NBR/Organo-clay Nanocomposite . Society of Chemical Industry, Polymer International, 53(4): 406-411.
23.
Kim, J., Lee, D. and Oh, T. ( 2003). Characteristics of Nitrile-Butadiene Rubber Layered Silicate Nanocomposites with Silane Coupling Agent, Applied Polymer Science, 89(10): 2633-2640.
24.
Kim, J., Oh, T. and Lee, D. ( 2003). Preparation and Characteristics of Nitrile Butadiene Rubber (NBR) Nanocomposites Based on Organophilic Layered Clay, Society of Chemical Industry, 52(7): 1058-1063.
