Effects of Ductile Fiber Size on the Fracture Toughness of Copper/Polyester Composites

Abstract

The objective of this study is to examine the effect of fiber size on the fracture toughness of ductile fiber reinforced composite materials. For this purpose, pull-out tests of copper fiber embedded in polyester matrix have been conducted, as a result of which load—displacement graphics for different fiber diameters and embedded lengths have been obtained. Using the derived load—displacement graphics, debonding load of each specimen has been found, and sliding shear stress, bond shear stress, and pull-out work have been calculated. Then, fracture energy increments per unit cross-sectional area have been determined. In the numeric part of the study, pull-out test was modeled using finite element package program ANSYS (11.0). With the help of this model, load—displacement graphic obtained in the test has been repeated in numeric terms. Obtained results have been presented in the form of tables and graphs and interpreted. It has been observed that the fracture energy increment increases with increase in the diameter of the copper fiber.

Keywords

mechanical testing finite element method debonding fracture toughness.

Get full access to this article

View all access options for this article.

References

Wetherhold, R.C. and Bos, J. (2000). Ductile Reinforcements for Enhancing Fracture Resistance in Composite Materials, Theoretical and Applied Fracture Mechanics, 33(2): 83-91.

Wetherhold, R.C. and Lee, K.L. (2001). Shaped Ductile Fibers to Improve the Toughness of Epoxy-Matrix Composites, Composite Science and Technology, 61(4): 517-530.

Tsai, J. , Patra, A.K. and Wetherhold, R. ( 2003). Numerical Simulations of Fracture-Toughness Improvement Using Short Shaped Head Ductile Fibers, Composites: Part A , 34(12): 1255-1264.

Kharrat, M. , Dammak, M. and Charfi, A. ( 2006). Mechanical Characterization of Interface for Steel/Polymer Composite Using Pull-Out Test: Shear-Lag and Frictional Analysis, Journal of Materials Science and Technology, 22(4): 552-558.

Nairn, J.A. , Liu, C.H. , Mendels, D.A. and Zhandarov, S. ( 2001). Fracture Mechanics Analysis of the Single-Fiber Pull-Out Test and the Microbond Test Including the Effects of Friction and Thermal Stresses, In: Proceedings 16th Annual Technical Conference of the American Society for Composites, VPI, Blacksburg VA, 9-12 September.

Wang, C. ( 1997). Fracture Mechanics of Single-Fiber Pull-Out Test, Journal of Materials Science, 32(2): 483-490.

Yang, Q.S. , Qin, Q.H. and Peng, X.R. ( 2003). Size Effects in the Fiber Pullout Test, Composite Structures, 61(3): 193-198.

Meo, M. , Achard, F. and Grassi, M. ( 2005). Finite Element Modelling of Bridging Mico-Mechanics in Through-Thickness Reinforced Composite Laminates, Composite Structures, 71(3-4): 383-387.

Xiaoyu, J. and Xiangan, K. ( 1999). Micro-Mechanical Characteristics of Fiber/Matrix Interfaces in Composite Materials, Composite Science and Technology, 59(5): 635-642.

10.

Easley, T.C. and Faber, K.T. (1999). Use of a Crack-Bridging Single-Fiber Pullout Test to Study Steel Fiber/Cementitious Matrix Composites , Journal of the American Ceramic Society, 82(12): 3513-3520.

11.

Polacek, P. and Jancar, J. ( 2008). Effect of Filler Content on the Adhesion Strength Between UD Fiber Reinforced and Particulate Filled Composites, Composites Science and Technology, 68(1): 251-259.

12.

Redon, C. , Li, V.C. , Fellow, A.S.C. E., Wu, C. , Hoshiro, H. , Saito, T. and Ogawa, A. ( 2001). Measuring and Modifying Interface Properties of PVA Fibers in ECC Matrix, Journal of Materials in Civil Engineering, 13(6): 399-406.

13.

Simkins, V.R. , Alderson, A. , Davies, P.J. and Alderson, K.L. (2005). Single Fiber Pullout Tests on Auxetic Polymeric Fibers, Journal of Materials Science , 40(16): 4355-4364.

14.

Boes, J.H. ( 1997). Fracture Toughness of Composite Materials Reinforced with Short Ductile Fibers, Master Thesis, Graduate School of State University of New York at Buffalo, p. 121.

15.

Ansys 11.0. Academic Teaching Introductory Help Menu, 2007.