In this article, we study laminated bio-composites that were reinforced with empty fruit bunches. Five-ply veneer laminated bio-composites were prepared by alternately arranging oil palm trunk veneer and empty fruit bunch mat. Composites were made with a gluing layer of 250 or 450 g/m2 of phenol formaldehyde. The mechanical, physical, and thermal (TGA) properties of the composite were studied. Results indicated an improvement in mechanical, physical, and thermal properties of the laminated bio-composites with the use of empty fruit bunches as reinforcement. The water absorption and thickness swelling of laminated bio-composites that were reinforced with empty fruit bunches were better than bio-composites not reinforced with empty fruit bunches. Laminated bio-composites with the use of empty fruit bunch as reinforcement showed better bending strength, bending modulus, and screw withdrawal. Thermal stability for laminated bio-composites with empty fruit bunch also improved. Images taken with a scanning electron micrograph indicated an improvement in the fiber-matrix bonding for the laminated panel glued with 450 g/m 2 of phenol formaldehyde.
Sumathi, S., Chai, S.P. and Mohamed, A.R. ( 2008). Utilization of Oil Palm as a Source of Renewable Energy in Malaysia, Renewable and Sustainable Energy Reviews, 12(9): 2404-2421.
2.
Alam, M.Z., Mamun, A.A., Qudsieh, I.Y., Muyibi, S.A., Salleh, H.M. and Omar, N.M. ( 2009). Solid State Bioconversion of Oil Palm Empty Fruit Bunches for Cellulase Enzyme Production Using a Rotary Drum Bioreactor, Biochemical Engineering Journal, 46: 61-64.
3.
Yusof, B. ( 2007). The Oil Palm Production Through Sustainable Plantations , European Journal of Lipid Science and Technology, 109: 289-295.
4.
Van den Bulcke, J., Van Acker, J. and De Smet , J. (2009). An Experimental Set-up for Real-time Continuous Moisture Measurements of Plywood Exposed to Outdoor Climate, Building and Environment, 44: 2368-2377.
5.
Ronald, H.B. ( 1996). Construction and Industrial Plywood, National Institute of Standards and Technology, Tacoma, Washington.
6.
Jerrold, E.W. ( 2006). Advanced Wood- and Bio-composites: Enhanced Performance and Sustainability, In: The 4th International Conference on Advanced Materials and Processes, p. 27, University of Waikato, Hamilton, New Zealand, 10-13 December.
7.
Kelvin, M.C. ( 2006). Wood-based Panels: Particleboard, Fibreboards and Oriented Strand Board, In: Walker, J.C.F. (ed.), Primary Wood Processing Principles and Practice, 2nd edn, p. 427, Springer, England.
8.
Raquez, J.-M. , Deléglise , M., Lacrampe, M.-F. and Krawczak, P. (2010). Thermosetting (Bio)Materials Derived from Renewable Resources: A Critical Review, Progress in Polymer Science, 35: 487-509.
9.
Tonge, L.Y., Hodgkin, J., Blicblau, A.S. and Collins, P.J. ( 2001). Effects of Initial Phenol-Formaldehyde (PF) Reaction Products on the Curing Properties of PF Resin, Journal of Thermal Analysis and Calorimetr, 64: 721-730.
10.
Moubarik, A. , Pizzi, A., Allal, A., Charrier, F. and Charrier, B. (2009). Cornstarch and Tannin in Phenol-Formaldehyde Resins for Plywood Production, Industrial Crops and Products, 30: 188-193.
11.
Sreekala, M.S. , Jayamol, G. and Sabu, T. (2001). Water-sorption Kinetics in Oil Palm Fibers, Journal of Polymer Science. Part B. Polymer physics, 39: 1215-1223.
12.
Myrtha, K., Holia, O., Dawam, Abdullah, A.H. and Anung, S. ( 2008). Effect of Oil Palm Empty Fruit Bunch Fiber on the Physical and Mechanical Properties of Fiber Glass Reinforced Polyester Resin, Journal of Biological Sciences, 8(1): 101-106.
13.
Sreekala, M.S. , Kumaran, M.G., Joseph, S., Jacob, M. and Thomas, S. (2000). Oil Palm Fibre Reinforced Phenol Formaldehyde Composites: Influence of Fibre Surface Modifications on the Mechanical Performance, Applied Composite Materials, 7: 295-329.
14.
Abdul Khalil, H.P.S., Hanida, S., Kang, C.W. and Nik Fuaad , N.A. (2007). Agro-Hybrid Composite: The Effects on Mechanical and Physical Properties of Oil Palm Fiber (EFB)/ Glass Hybrid Reinforced Polyester Composites, Journal of Reinforced Plastics and Composites, 26: 203-218.
15.
Jacob, M., Thomas, S. and Varughese, K.T. ( 2004). Mechanical Properties of Sisal/Oil Palm Hybrid Fiber Reinforced Natural Rubber Composites, Composites Science and Technology, 64: 955-965.
16.
Richard, F.B. ( 1995). Adhesives and Bonding Techniques, In: Plywood and Veneer-Based Products Manufacturing Practices, p. 256, Miller Freeman Inc, California, USA.
17.
Celebi, G. and Kilic, M. ( 2007). Nail and Screw Withdrawal Strength of Laminated Veneer Lumber Made Up Hardwood and Softwood Layers, Construction and Building Materials, 21: 894-900.
18.
Ismail, A. and Gursel, C. ( 2007). Variation in Surface Roughness, Wettability and Some Plywood Properties After Preservative Treatment with Boron Compounds, Building and Environment, 42: 3837-3840.
19.
Abdul, Khalil, H.P.S., Issam, A.M., Ahmad, Shakri , M., Suriani, R. and Awang, A.Y. (2007). Conventional Agro-composites from Chemically Modified Fibres, Industrial Crops and Products, 26: 315-323.
20.
Suhara, P. and Mohini, S. ( 2007). Studies on the Water Absorption Properties of Short Hemp-Glass Fiber Hybrid Polypropylene Composites, Journal of Composite Materials, 41: 1871-1883.
21.
Siti Norralakmam, Y. (2007). Particleboards, In: Turning Oil Palm Residues into Products, Research Pamphlets No.127, p. 27, Forest Research Institute Malaysia (FRIM)Kepong, Malaysia.
22.
Lai, J.C. (2007). Mechanical and Water Absorption Properties of Lignocellulosic Phenolic Composites, MSc Thesis, UTM, Skudai, Johor, Malaysia.
23.
Sreekala, M.S. , Kumaran, M.G. and Thomas, S. (2002). Water Sorption in Oil Palm Fiber Reinforced Phenol Formaldehyde Composite, Composites Part A: Applied science and manufacturing, 33: 763-777.
24.
Kelly, A. ( 1994). Plywood, In: Concise Encyclopedia of Composite Materials, revised edn, p. 240, Pergamon, England.
25.
Sellers, T. ( 1985). Plywood and Adhesives Technology, p. 535, Marcel Dekker, New York.
