Assessment of the Long-term Shear Behavior of Epoxy Polymer Lap Joint Used to Bond Steel and Concrete Composite Structure

Abstract

This article presents the results of an experimental study concerning the evolution in time of the shear modulus of an epoxy resin used for bonding together steel girders and concrete slabs. For this purpose, two experimental methodologies are set up. The first one, based on mechanical spectroscopy measurements allows to assess a rheological model adapted to the polymer resin (Zener’s model). In this case, the analysis of the shear behavior of the material itself is carried out. The second one, based on the time-temperature equivalency principle, analyzes the long-term shear behavior of epoxy joints under real loading conditions: double shear tests are performed on steel-concrete lap joint bonded together with an epoxy adhesive. The results of the two procedures permit to assess the evolution of the shear modulus for a time period of 10⁹ s (~50 years). Analyzing only the intrinsic behavior of the material is insufficient for this time range, because additional mechanisms occur at the concrete-epoxy interface.

Keywords

polymer resin creep interface/interphase time-temperature equivalency finite element modeling.

Get full access to this article

View all access options for this article.

References

Lanzan, B.J. ( 1968). Damping of Materials and Members in Structural Mechanics , Pergamon Press, London.

Bing, F.J. and Kuo-Kang, L. ( 2002). Characterizing Viscoelastic Properties of Thin Elastomeric Membrane, Mechanics of Materials, 34: 485-492.

Pipkik, A.C. ( 1972). Lectures on Viscoelasticity Theory, Springer-Verlag, New-York.

Nielsen, L.E. ( 1975). Mechanical Properties of Polymers and Composites, Creep and Stress Relaxation, p. 67, Marcel Decker, New York.

Usami, S. , Suzuji, T. , Ejima, H. , Asano, K. ( 1999). Thermo-mechanical Properties of Epoxy GFRPs used in Superconducting Magnet Winding, Cryogenics, 39: 905-914.

Vuoristo, T. and Kuokkala, V.T. ( 2002). Creep, Recovery and High Strain Rate Response of Soft Roll Cover Materials, Mechanics of Materials, 34: 493-504.

Ferrier, E. and Hamelin, P. ( 2002). Long Time Concrete Composite Interface Characterization for Reliability Prediction of RC Beam Strengthened with FRP, Material and Structure, 35: 564-572.

Cole, K.S. and Cole, R.H. ( 1941). Dispersion and Absorption in Dielectrics - Alternating Current Characteristics, Journal of Chemical and Physics, 9: 341-352.

Yong-Sok, O. ( 1974). Contribution à l'étude de la Viscoélasticité des Matériaux Composites: Verre/Polyester et Carbone/Epoxyde, p. 180, Institut National des Sciences Appliquées (INSA), Lyon .

10.

Doan, C. , Boufera, A. , Hamelin, P. ( 1992). Comportement Viscoelastique des Matrices Polymères , In: Boehler, A. , Hamelin, P. , Verchery, G. (eds), Comportement des Composites à Renfort Tissu; Comportement Dynamique des Composites, Editions Pluralis, Paris.

11.

Williams, M.L. , Landel, J.D. , Ferry, J.D. (1955). The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids , Journal of the American Chemical Society, 77: 3701-3707.

12.

Ferrier, E. , Lagarde, G. , Hamelin, P. (2001). RC Beams Reinforced by FRP, Temperature Effects on the Adhesive Layer, Composite Science and Technology, 61: 425-431.

13.

Papanicolaou, G.C. , Zaoutsos, S.P. , Cardon, A.H. (1999). Prediction of the Non-linear Viscoelastic Response of Unidirectional Fiber Composites, Composites Science and Technology, 59: 1311-1319.

14.

Marais, C. and Villoutreix, G. ( 1998). Analysis and Modelling of the Creep Behavior of the Thermostable PMR-15 Polyimide, Journal of Applied Polymer Science, 69: 1983-1991.

15.

Taljsten, B. (1997). Defining Anchor Lengths of Steel and CFRP Plates Bonded to Concrete, International Journal of Adhesives, 17(4).

16.

Smith, L.H. ( 1973). Adhesive-bonded Double Lap Joints, Technical Report CR 112235, NASA.

17.

Jeandrau, J.P. (1993). Technologie du Collage Structural Pour les Applications en Mécanique, pp. 108-109, St-Etienne , CETIM.