Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): statistical analysis of the roughness parameters

Abstract

Glass fiber-reinforced polyamides are promising materials especially for automotive applications, exhibiting high mechanical strength and stiffness. In order to achieve the required tolerances and surface quality, these materials must be subjected to machining operations. Drilling is one of the machining processes most widely applied to composite materials and, for this reason, this article is focused on the machinability of polyamide reinforced with glass whiskers for high speed drilling operation. A full factorial experimental design was carried out in order to identify the main effects and interaction between the factors feed speed, spindle speed and drill point angle on surface roughness (R_a) and normalized peak count (P_c) responses. The work material (PA66-GF30 polyamide reinforced with 30% glass whiskers) was drilled using tungsten carbide (ISO grade K10) drills. The results indicated that the interaction between feed speed, spindle speed, and drill point angle presented a significant effect on the R_a response. In addition to that, the factor feed speed and the interaction between spindle speed and drill point angle significantly affected the peak count response.

Keywords

composites drilling HSM polyamide roughness parameter

Get full access to this article

View all access options for this article.

References

Callister WD Materials science and engineering: an introduction. New York: John Wiley & Sons, 2002 .

Lee DG , Lee CS , Lee HG , Hwang HY and Kim JW Novel applications of composite structures to robots, machine tools and automobiles . Compos Struct 2004; 66(1-4): 17-39.

Lindberg RA Process and materials of manufacture, 4th ed. Boston: Allyn and Bacon, 1990.

Daniel IM and Ishai O. Engineering mechanics of composite materials. New York : Oxford University Press, 1994.

Davim JP and Mata FJ A comparative evaluation of the turning of reinforced and unreinforced polyamide . Int J Adv Manuf Technol 2007; 33: 911-914.

McCrum NG and Buckley CP Principles of polymer engineering, 2nd ed. New York: Oxford University Press , 1997.

Mohan NS , Ramachandra A. and Kulkarni SM Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites. Compos Struct 2005; 71: 407-413.

Bhattacharyya D. and Horrigan DPW. A study of hole drilling in Kevlar composites . Compos Sci Technol 1998; 58: 267-283.

Khashaba UA Delamination in drilling GFR-thermoset composites. Compos Struct 2004; 63: 313-327.

10.

Hocheng H. and Tsao CC Effects of special drill bits on drilling-induced delamination of composite materials. Int J Mach Tools Manuf 2006; 46(12-13): 1403-1416.

11.

Aoyama E. , Nobe H. and Hirogaki T. Drilled hole damage of small diameter in printed wiring board. J Mater Process Technol 2001; 118: 436-441.

12.

Davim JP , Campos Rubio JC and Abrão A. A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates. Compos Sci Technol 2007; 67: 1939-1945.

13.

Palanikumar K. , Karunamoorthy L. and Manoharan N. Mathematical model to predict the surface roughness on the machining of glass fiber reinforced polymer composites. J Reinf Plast Compos 2006; 25: 407-417.

14.

Davim JP , Reis P. , Lapa V. and Antonio CC Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for application in structural components. Compos Struct 2003; 62: 67-73.

15.

Abrão AM , Faria PE , Campos Rubio J. , Reis P. and Davim JP Drilling of fiber reinforced plastics: a review . J Mater Process Technol 2007; 186: 1-7.

16.

Clark RL Jr , Craven MD and Kander RG Nylon 66/ poly(vinyl pyrrolidone) reinforced composites: 2 Bulk mechanical properties and moisture effects. Composites: Part A 1999; 30: 37-48.

17.

Mummery L. Surface texture analysis: the handbook. Mühlhausen : Hommelwerke GmbH, 1992.

18.

Montgomery DC Design and analysis of experiments. New York: John Wiley and Sons, 1991 .

19.

Wu CFJ and Hamada M. Experiments, planning, analysis and parameter design optimization. New York: John Wiley and Sons, 2000 .

20.

Campos Rubio J. , Abrão AM , Faria PE , Correia AE and Davim JP Delamination in high speed drilling of carbon fiber reinforced plastic (CFRP). J Compos Mater 2008; 42: 1523-1532.

21.

Langella A. , Nele L. and Maio A. A torque and thrust prediction model for drilling of composite materials. Composites: Part A 2005; 36: 83-93.

22.

Velayudham A. , Krishnamurthy R. and Soundarapandian T. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite . Int J Mach Tools Manuf 2005; 45: 399-406.