Abstract
Mechanical and morphological properties of composites containing styrene—acrylonitrile (SAN) copolymer, ethylene— propylene—diene (EPDM) polymer, and different types of precipitated calcium carbonate (PCC) were investigated and their properties were analyzed in regard to PCC surface properties and the way of sample preparation (with or without use of a masterbatch (MB)). Contact angles of test liquids on PCC samples were measured in order to determine surface free energies of filler and to predict strength of filler—polymer interactions. Filler—polymer interactions play a significant role in determining preferential localization of the filler in the composite. The tensile and impact strength results of the composites without the MB show much higher values than composites prepared with the MB. Significant decrease of tensile strength is observed for the samples prepared with the MB due to change in morphology, which is elongated dispersed EPDM particles in SAN matrix, compared to the samples prepared without the MB that have droplet morphology.
Get full access to this article
View all access options for this article.