Mechanical behaviors of glass/polyester composites after UV radiation

Abstract

Composites were fabricated by using glass fabric as the reinforcement and polyester as the matrix with the vacuum assisted resin infusion technique. Specimens were radiated by a Model SJD-1 ultraviolet lamp with various durations. The bending behavior, tensile strength, and the elongation at break of the UV radiated and unradiated composite panels were tested. The deteriorated mechanical properties of treated specimens were noticed. Usually, the bending strength would gradually decrease with prolonged UV radiation. The same trend was also seen for the tensile intensity of the samples. The corrosion process of the polymer caused by the oxygen in the atom state would be accelerated by the presentation of the UV ray, resulting in a serious damage on the material.

Keywords

UV radiation mechanical properties composites glass fiber polyester

Get full access to this article

View all access options for this article.

References

Andrady AL , Hamid HS and Torikai A. Effects of stratospheric ozone depletion and climate change on materials damage . Photochem Photobiol Sci 2007; 6(3): 311-318.

Kerr J. and McElroy CT Evidence for large upward trends of ultraviolet-B radiation linked to ozone depletion. Science 1993; 262: 1032-1034.

Cen YP and Bornman JF The effect of exposure to enhanced UV-B radiation on the penetration of monochromatic and polychromatic UV-B radiation in leaves of Brassica napus. Physiol Plant 1993; 87(3): 249-255.

Signor AW , VanLandingham MR and Chin JW Effects of ultraviolet radiation exposure on vinyl ester resins: characterization of chemical, physical and mechanical damage. Polym Degrad Stab 2003; 79(2): 359-368.

Goel A. , Chawla K. , Vaidya U. , Koopman M. and Dean D. Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites. J Mater Sci 2008; 43(13): 4423-4432.

Huang G. Ultraviolet treatment on high performance filaments. Mater Des 2005; 26: 47-51.

Bames JA Thermoplastics for space. SAMPE Q 1989; 20(3): 22-27.

Zachariev G. , Rudolph HV and Ivers H. Prediction of creep-damage accumulation in glass fibre reinforced polyoximethylene. Mater Sci Eng A 2009; 510-511: 425-428.

Alawsi G. , Aldajah S. and Rahmaan SA Impact of humidity on the durability of e-glass/polymer composites. Mater Des 2009; 30(7): 2506-2512.

10.

Richard HM Analysis of variance, statistical methods for engineers. Englewood Cliffs, New Jersey: Prentice-Hall, Inc, 1985, pp.306-347.