Nanomechanical properties of magnesium-based hybrid composites with graphite nanofiber and alumina short fiber

Abstract

In this study, an attempt was made to evaluate the nanomechanical properties of magnesium-based hybrid composites with graphite nanofibers (GNFs) and alumina short fibers (Al₂O_3sf) by nanoindentation. The nanoindentation was performed using continuous stiffness measurement (CSM) method with an indentation depth of 2000 nm. To find out the modulus and hardness of composites of local regions, indentation tests were carried out in different locations of the sample, such as GNFs/Al₂O_3sf region, Al₂O_3sf region, GNFs cluster, and Mg matrix. The modulus and hardness values closer to the GNFs/Al₂O_3sf region are higher than those of the corresponding to the other regions primarily because of a higher constraint to the localized matrix deformation during indentation. Furthermore, the presence of GNFs can act as a barrier for movement of dislocations enhancing the indentation properties. The presence of MgO/Mg₁₇Al₁₂ also can contribute to improve the nanoindentation properties of the present composite system.

Keywords

nanoindentation Mg hybrid composites mechanical properties

Get full access to this article

View all access options for this article.

References

Babu

JSS

Nair

Unnikrishnan

Kang

Kim

. Fabrication and properties of magnesium (AM50) based hybrid composites with graphite nanofiber and alumina short fiber J Compos Mater 2010; 44: 971–987.

Urena

Ram

Campo

Sanchez

. Effect of reinforcement coatings on the dry sliding wear behaviour of aluminium/SiC particles/carbon fibres hybrid composites Wear 2009; 266: 1128–1136.

Zhang

. Mechanical properties of ABOw-MWNTs/Al hybrid composites made by squeeze cast technique Mater Lett 2007; 61: 3504–3506.

Han

. Short-fibre/particle hybrid reinforcement: Effects on fracture toughness and fatigue crack growth of metal matrix composites Compos Sci Technol 2007; 67: 1719–1726.

Oliver

Pharr

. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J Mater Res 1992; 7: 1564–1583.

Pharr

. Measurement of mechanical properties by ultra-low load indentation Mater Sci Eng A 1998; 253: 151–159.

Bhushan

. A review of nanoindentation continuous stiffness measurement technique and its applications J Mater Charact 2002; 48: 11–36.

Fischer-Cripps

. Nanoindentation 1st ed. New York: Springer Inc., 2002.

Babu

JSS

Kang

. Nanoindentation behaviour of aluminium based hybrid composites with graphite nanofiber/alumina short fiber Mater Design 2010; 31: 4881–4885.

10.

Mussert

Vellinga

Bakker

Vander

. A nano-indentation study on the mechanical behaviour of the matrix materials in an A6061-Al2O3 MMC J Mater Sci 2002; 37: 789–794.

11.

Rodríguez

Garrido-Manerio

Poza

Gomez-del

Rio

. Determination of mechanical properties of aluminum matrix composites constituents Materi Sci Eng A 2006; 437: 406–412.

12.

Urena

Rams

Escalera

Sanchez

. Characterization of interfacial mechanical properties in carbon fiber/aluminum matrix composites by the nanoindentation technique Compos Sci Technol 2005; 65: 2025–2038.

13.

Zhong

Hou

. A nanoindentation analysis of the effects of microstructure on elastic properties of Al2O3sf/SiC composites Compos Sci Technol 2007; 67: 3121–3129.

14.

Campo

Urena

Rams

. Effect of silica coatings on interfacial mechanical properties in aluminium SiC composites characterized by nanoindentation Scripta Mater 2005; 52: 977–982.

15.

Bucaille

Rossoll

Moser

Stauss

Michler

. Determination of the metal matrix composite using instrumented indentation Mater Sci Eng A 2004; 369: 82–92.

16.

Krell

Schadlich

. Nanoindentation hardness of submicrometer alumina ceramics Mater Sci Eng A 2001; 309: 172–181.

17.

Deng

Cleveland

Karcher

Chawla

. Nanoindentation behaviour of nanolayered metal ceramic composites J Mater Eng Perform 2005; 14: 417–423.

18.

Bhushan

. A review of nanoindentation continuous stiffness measurement technique and its applications J Mater Charact 2002; 48: 11–36.

19.

Jayalakshmi

Kailas

Seshan

. Properties of squeeze cast Mg-10Al-Mn alloy and its alumina short fibre composites J Mater Sci 2003; 38: 1383–1389.

20.

Zhu

. Morphology of second phase precipitates in carbon fibre and graphite fibre reinforced magnesium based metal matrix composites Compos Sci Technol 1997; 57: 661–667.

21.

. Squeeze casting of Mg alloys and their composites J Mater Sci 1998; 33: 1579–1589.

22.

Abifarin

Adeyemi

. Residual stresses in squeeze cast aluminium rods Exp Mech 1993; 33: 174–180.

23.

Bouzakis

Michailidis

Hadjiyiannis

Skordais

Erkens

. The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress strain laws by nanoindentation J Mater Charact 2003; 49: 149–156.

24.

Ryu

Phillipp

NYJ

Ruhle

. Investigation of the interfacial reaction between multi walled carbon nanotube and aluminium Acta Mater 2006; 54: 5367–5375.

25.

Pharr

Strader

Oliver

. Critical issues in making small-depth mechanical property measurements by nanoindentation with continues stiffness measurement J Mater Res 2010; 24: 653–666.