Enhancing tensile and compressive strengths of magnesium using nanosize (Al 2 O 3 + Cu) hybrid reinforcements

Abstract

This study investigates the microstructure and mechanical properties of magnesium (Mg) containing alumina (Al₂O₃) and copper (Cu) nanoparticles as hybrid reinforcements. For composite preparation, the amount of Cu was varied from 0.1 to 0.9 volume percent, whereas the amount of Al₂O₃ was fixed at 1 volume percent. Mg and its composites were synthesized using powder metallurgy route incorporating energy-efficient microwave sintering followed by hot extrusion. Hybrid reinforcements in Mg matrix led to a grain size reduction, and the grain size decreased with increasing presence of secondary phases (reinforcements and intermetallics). Overall distribution of secondary phases within the matrix was observed to be uniform despite the formation of clusters. A significant improvement in microhardness was exhibited by all composite formulations when compared to pure Mg. The results also showed that yield and ultimate strengths were enhanced in all composite formulations under both tensile and compressive loading while tensile and compressive failure strains were compromised.

Keywords

Magnesium composite powder metallurgy microstructure tensile compression

Get full access to this article

View all access options for this article.

References

Miracle

. Metal matrix composites – from science to technological significance. Comp Sci Tech 2005; 65: 2526–2540.

Lloyd

. Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev 1994; 39: 1–23.

Tjong

. Novel nanoparticle reinforced metal matrix composites with enhanced mechanical properties. Adv Eng Mater 2007; 9: 639–652.

Liu

. Review of recent studies in magnesium matrix composites. J Mater Sci 2004; 39: 6153–6171.

Hassan

Gupta

. Development of a novel magnesium-copper based composite with improved mechanical properties. Mater Res Bull 2002; 37: 377–389.

Hassan

Gupta

. Development of high strength magnesium based composites using elemental nickel particulates as reinforcement. J Mater Sci 2002; 37: 2467–2474.

Hassan

Gupta

. Development of a novel magnesium/nickel composite with improved mechanical properties. J Alloys Compd 2002; 335: L10–L15.

Wong

WLE

Gupta

. Development of Mg/Cu nanocomposites using microwave assisted rapid sintering. Comp Sci Technol 2007; 67: 1541–1552.

Perez

Garces

Adeva

. Mechanical properties of a Mg–10 (vol.%)Ti composite. Comp Sci Technol 2004; 64: 145–151.

10.

Nguyen

Tun

Chan

Kwok

Kuma

JVM

Gupta

. Enhancing strength and hardness of AZ31B through simultaneous addition of nickel and nano-Al₂O₃ particulates. Mater Sci Eng A 2011; 528: 888–894.

11.

Tun

Gupta

Srivatsan

. Investigating influence of hybrid (yttria + copper) nanoparticulate reinforcements on microstructural development and tensile response of magnesium. Mater Sci Technol 2010; 26: 87–94.

12.

Tun

Gupta

. Development of magnesium (yttria + nickel) hybrid nanocomposites using hybrid microwave sintering: microstructure and tensile properties. J Alloys Compd 2009; 487: 76–82.

13.

Tun

Gupta

. Role of microstructure and texture on compressive strength improvement of Mg/(Y₂O₃+Cu) hybrid nanocomposites. J Comp Mater 2010; 44: 3033–3050.

14.

Tun

Gupta

. Compressive deformation behavior of Mg and Mg/(Y₂O₃+Ni) nanocomposite. Mater Sci Eng A 2010; 527: 5550–5556.

15.

Thakur

Balasubramanian

Gupta

. Microwave synthesis and characterization of magnesium based composites containing nanosized SiC and hybrid (SiC + Al₂O₃) reinforcements. Trans ASME 2007; 129: 194–199.

16.

Thakur

Srivatsan

Gupta

. Synthesis and mechanical behavior of carbon nanotube-magnesium composites hybridized with nanoparticles of alumina. Mater Sci Eng A 2007; 466: 32–37.

17.

Wong

WLE

Gupta

. Simultaneously improving strength and ductility of magnesium using nano-size SiC particulates and microwaves. Adv Eng Mater 2006; 8: 735–740.

18.

Hassan

Gupta

. Development and characterization of ductile Mg/Y₂O₃ nanocomposites. Trans ASME 2007; 129: 462–467.

19.

Hassan

Gupta

. Development of high performance magnesium nano-composites using nano-Al₂O₃ as reinforcement. Mater Sci Eng A 2005; 392: 163–168.

20.

Goh

Wei

Lee

Gupta

. Properties and deformation behaviour of Mg-Y₂O₃ nanocomposites. Acta Mater 2007; 55: 5115–5121.

21.

Tun

Gupta

. Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method. Comp Sci Technol 2007; 67: 2657–2664.

22.

Habibi

Joshi

Gupta

. Hierarchical magnesium nano-composites for enhanced mechanical response. Acta Mater 2010; 58: 6104–6114.

23.

Habibi

Paramsothy

Hamouda

AMS

Gupta

. Using integrated hybrid (Al + CNT) reinforcement to simultaneously enhance strength and ductility of magnesium. Comp Sci Technol 2011; 71: 734–741.

24.

Magnesium showcase, Issue 15, Feb 2011. http://www.intlmag.org/showcase/MgShowcase15_Feb2011.pdf (accessed 17 August 2011).

25.

Magnesium showcase, Issue 8, April 2009. http://www.intlmag.org/showcase/MgShowcase8_apr09.pdf (accessed 17 August 2011).

26.

Goh CS, Wei J and Gupta M. Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique. Nanotech 2006; 17: 7–12.

27.

Wong

WLE

Karthik

Gupta

. Development of hybrid Mg/Al₂O₃ composites with improved properties using microwave assisted rapid sintering route. J Mater Sci 2005; 40: 3395–3402.

28.

Thakur

Kong

Gupta

. Microwave synthesis and characterization of metastable (Al/Ti) and hybrid (Al/Ti + SiC) composites. Mater Sci Eng A 2007; 452–453: 61–69.

29.

Okanoto

(ed.) . Phase diagrams for binary alloys. Metals Park, OH: ASM International, 2001, pp. 301–301.

30.

Inem

. Dynamic recrystallization in a thermomechanically processed metal matrix composite. Mater Sci Eng A 1995; 197: 91–95.

31.

Wang

Zhang

Huang

Chang

Gan

. Effect of hot extrusion on the microstructure of a particulate reinforced magnesium matrix composite. Mater Sci Eng A 2007; 465: 78–84.

32.

Humphreys

. The nucleation of recrystallization at second phase particles in deformed aluminum. Acta Metall 1977; 25: 1323–1344.

33.

Shahani

Clyne

. Recrystallization in fibrous and particulate metal matrix composites. Mater Sci Eng A 1991; 135: 281–285.

34.

Kang

Chan

. Tensile properties of nanometric Al₂O₃ particulate-reinforced aluminum matrix composites. Mater Chem Phys 2004; 85: 438–443.

35.

Shanthi

Tun

Pandey

Gupta

. Enhancing overall tensile behavior or ductility of AZ91D using nano Al₂O₃ and heat treatment. Kovove Mater Metal Mat 2011; 49: 197–205.

36.

Del Valle

Ruano

. Influence of grain size fluctuations on ductility of superplastic magnesium alloys processed by severe plastic deformation. Mater Sci Technol 2008; 24: 1238–1244.