This study presents the development of fabrication techniques and experimental measurements of out-of-plane fiber waviness in a continuous fiber-reinforced polymer composite. Literature on characterization and fabrication techniques was briefly reviewed. Three fabrication methods were developed: the transverse-strip method, ply-drop method, and constant-thickness ply-drop method. Experimental characterization demonstrated that specimens with a range of waviness parameters can be easily manufactured. The most important features of the techniques are ease of fabrication and simplicity of experimental setup. An industrial part was characterized optically to validate the techniques, showing a maximum misalignment angle of 5.3°.
ArgonAS. Fracture of composites. In: HermanH (ed.) Treatise on materials science and technology, Vol. 1. New York: Academic Press, 1972, pp. 78–114.
2.
MartinezGMPiggottMRBainbridgeDMRHarrisB. The compression strength of composites with kinked, misaligned and poorly adhering fibres. J Mater Sci1981; 16: 2831–2836.
3.
PiggottMR. The compression strength of composites with kinked, misaligned and poorly adhering fibres. J Mater Sci1981; 16: 2837–2845.
4.
WronskiASParryTV. Compressive failure and kinking in uniaxially aligned fibre composites. J Mater Sci1982; 17: 3656–3662.
Potter K. Understanding the origins of defects and variability in composites manufacturing. In: 17th International Conference on Composite Materials, 27–31 July, 2009, Edinburgh International Convention Centre (EICC), Edinburgh, UK.
7.
FakirovSFakirovaC. Direct determination of the orientation of short glass fibers in an injection-molded poly(ethylene terephthalate) system. Polym Compos1985; 6(1): 41–46.
8.
YurgartisSW. Measurement of small angle fibre misalignment in continuous fibre composites. Compos Sci Technol1987; 30: 279–293.
9.
ClarkeARArchenholdGDavidsonNC. A novel technique for determining the 3D spatial distribution of glass fibres in polymer composites. Compos Sci Technol1995; 55: 75–91.
10.
CreightonCJSutcliffeMPFClyneTW. A multiple field image analysis procedure for characterisation of fibre alignment in composites. Composites: Part A2001; 32: 221–229.
11.
KratmannKKSutcliffeMPFLillehedenLTPyrzRThomsenOT. A novel image analysis procedure for measuring fibre misalignment in unidirectional fibre composites. Compos Sci Technol2009; 69: 228–238.
12.
SmithRANelsonLJMienczakowskiMJChallisRE. Automated analysis and advanced defect characterisation from ultrasonic scans of composites. J Br Inst NDT2009; 51(2): 82–87.
13.
Martin-HerreroJGermainC. Microstructure reconstruction of fibrous C/C composites from X-ray microtomography. Carbon2007; 45: 1242–1253.
14.
AnastasiRF. Investigation of fiber waviness in a thick glass composite beam using THz NDE. In: SPIE Smart Structures and Materials and Nondestructive Evaluation and Health Monitoring, San Diego, USA, 2008.
CaiazzoAOrletMMcShaneHStraitLRachauC. The effects of Marcel defects on composite structural properties. In: GrantPRousseauQ (eds) Composite structures: theory and practice. ASTM, STP1383. West Conshohocken: American Society for Testing and Materials, 2000, pp. 158–187.
17.
MrseAMPiggottMR. Compressive properties of unidirectional carbon fibre laminates: II. The effects of unintentional and intentional fibre misalignments. Compos Sci Technol1993; 46(3): 219–227.
18.
KuoC-MTakahashiKChouT-W. Effect of fiber waviness on the nonlinear elastic behavior of flexible composites. J Compos Mater1988; 22(11): 1004–1025.
19.
WisnomMRAtkinsonJW. Compressive failure due to shear instability: experimental investigation of waviness and correlation with analysis. J Reinf Plast Compos1996; 15: 420–439.
20.
Khan, B., Potter KD and Wisnom MR. Simulation of process induced defects in resin transfer moulded woven carbon fibre laminates and their effect on mechanical behaviour. In: The 8th International Conference on Flow Processes in Composite Materials (FPCM8), Douai, France, 2006.
21.
HsiaoHMDanielIM. Effect of fiber waviness on stiffness and strength reduction of unidirectional composites under compressive loading. Compos Sci Technol1996; 56(5): 581–593.
22.
Dayal V. Fabrication and ultrasonic non-destructive evaluation of wavy composites. In: Vibro-Acoustic Characterisation of Materials and Structures, Annual Winter Meeting of American Society of Mechanical Engineers, NCA, November, 1992, New York, Vol. 14, pp. 215–219.
23.
AdamsODHyerMW. Effects of layer waviness on the compression strength of thermoplastic composite laminates. J Reinf Plast Compos1993; 12(4): 414–429.
24.
AdamsDOBellSJ. Compression strength reductions in composite laminates due to multiple-layer waviness. Compos Sci Technol1995; 53(2): 207–212.
25.
PotterKDWeaverPM. A concept for the generation of out-of-plane distortion from tailored FRP laminates. Composites Part A2004; 35(12): 1353–1361.
26.
CrookstonJJ. Prediction of elastic behaviour and initial failure of textile composites. Ph.D. Thesis, University of Nottingham, UK, 2004.
