The efficiency of two coupling agents in wood-polymer composites was investigated in this study. Thermal behavior of neat polypropylene, wood flour/polypropylene composite, maleated anhydride polypropylene-reinforced wood-polymer composite, and oxidized polypropylene-reinforced wood-polymer composite was investigated by means of differential scanning calorimetry and scanning electron microscopy in order to obtain information on the dispersion of the wood flour in the polymeric matrix, on the crystallization kinetics of polypropylene, and the macrostructure of its composites. The results confirm the expected nucleant effect of wood with and without the coupling agents used. The wide angle X-ray diffraction patterns indicated enhanced compatibility between polypropylene and wood with the addition of coupling agent. As a coupling agent, maleated anhydride polypropylene had a better performance in wood-polymer composites than polypropylene oxide and neat polypropylene because of its stronger interfacial bonding. Coupling agents help overcome the polarity disparity increase. All the results showed that with maleated anhydride polypropylene, oxidized polypropylene or without any coupling agent, wood flour acted as nucleating agent and increased the crystallization rate of polypropylene. For the composites, wood with maleated anhydride polypropylene was a more effective nucleating agent for polypropylene than wood with oxidized polypropylene. The mechanical properties were evaluated and the samples with coupling agent showed superior results like tensile and flexural properties.
IshakZYowBNgB. Hygrothermal ageing and tensile behavior of injection molded rice husk filler polypropylene composite. J Appl Polym Sci2001; 81: 742–749.
2.
ParkBDBalatineczJJ. Effects of impact modification on the mechanical properties of wood-fiber thermoplastic composites with high impact polypropylene (HIPP). J Thermoplast Compos1996; 9: 342–364.
3.
MatuanaLMWoodhamsRTParkCB. Influence of interfacial interactions on the properties of PVC/wood-fiber composites. SPE ANTEC, Tech Papers1998; 56: 3313–3318.
4.
MohantyAKDrzalLTMisraM. Novel hybrid coupling agent as an adhesion promoter in natural fibre reinforced powder polypropylene composites. J Mater Sci Lett2002; 21: 1885–1888.
5.
LuJZWuQMcNabbHS. Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments. Wood Fiber Sci2000; 32: 88–104.
6.
ChunIWoodhamsRT. Use of processing aids and coupling agents in micareinforced polypropylene. Polym Comp1984; 5: 250–257.
7.
DalvägHKlasonCStrömvallHE. The efficiency of cellulosic fillers in common thermoplastics. Part II. Filling with processing aids and coupling agents. Intern J Polymeric Mater1985; 11: 9–38.
8.
SchneiderMHBrebnerKI. Wood-polymer combinations: the chemical modification of wood by alkoxysilane coupling agents. Wood Sci Technol1985; 19: 67–73.
9.
LuJZWuQMcNabbHS. Chemical coupling in wood fibre and polymer composites: a review of coupling agents and treatments. Wood Fibre Sci2000; 32(1): 88–104.
10.
Krzysik AM, Youngquist JA, Myers GE, et al. Wood–polymer bonding in extruded and nonwoven web composites panels. Wood Adhesives Symposium of USDA Forest Service, Madison, WI, 1990, 183–189.
11.
NdiayeDFantonEMorlat-TheriasS. Durability of wood polymer composites: Part 1. Influence of wood on the photochemical properties. Compos Sci Technol2008; 68: 2779–2784.
12.
DieneNMatuanaLMSandrineMT. Thermal and mechanical properties of polypropylene/wood-flour composites. J Appl Polym Sci2011; 119: 3321–3328.
13.
OksmanKLindbergHHolmgrenA. The nature and location of SEBSMA compatibilizer in polyethylene-wood flour composites. J Appl Polym Sci1998; 69: 201–205.
GrayDG. Polypropylene transcrystallization at the surface of cellulose fibers. J Polym Sci: Polym Lett1974; 12: 509–515.
17.
AbdoussMSharifi-SanjaniN. Oxidation of polypropylene homopolymer in the molten state in presence of air. J Macrom Sci Pure Appl Chem1999; 36: 1521–1535.
Canche-EG, Cauich-CupulJIMendizabalE. Mechanical properties of acrylate-grafted henequen cellulose fibres and their application in composites. Compos Part A1999; 30: 349–359.
20.
KamalBAShusheng PangMarkPStaiger. Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE). Composites: Part B2008; 39: 807–815.
21.
BalsuriyaPWYeLMaiYW. Mechanical properties of wood flake–polyethylene composites II. Interface modification. J Appl Polym Sci2002; 83: 2505–2521.
22.
JosephPVJosephKThomasS. The thermal and crystallization studies of short sisal fibre reinforced polypropylene composites. Compos part A2003; 34: 253–266.
23.
WikbergHMaunaSL. Characterisation of thermally modified hard and softwoods by 13C CPMAS NMR. Carbohyd Polym2004; 58: 461–466.
24.
PracellaMChionnaDAnguillesiI. Functionalization, compatibilization and properties of polypropylene composites with hemp fibres. Compos Sci Technol2006; 13: 2218–2230.
25.
DiLorenzoMSilvestreC. Non-isothermal crystallization of polymers. Prog Polym Sci1999; 24: 917–950.
26.
BorysiakSDoczekalskaB. Influence of chemical modification of wood on the crystallisation of polypropylene. Holz Roh Werkst2006; 64: 451–454.
27.
BouafifHKoubaaAPerréP. Wood particle/high density polyethylene composites: thermal sensitivity and nucleating ability of wood particles. J Appl Polym Sci2009; 113: 593–600.
28.
GarbarczykJPauksztaDBorysiakS. Polymorphism of isotactic polypropylene in presence of additives, in blends and in composites. J Macromol Sci Phys2002; 41: 1267–1278.
29.
MathewAPOksmanKSainM. The effect of morphology and chemical characteristics of cellulose reinforcements on the crystallinity of polylactic acid. J Appl Polym Sci2006; 101: 300–310.
30.
TaskerSBadyalJPSBacksonSCE. Hydroxyl accessibility in celluloses. Polymer1994; 35(22): 4717–4721.
31.
BengtssonMBaillifMOksmanK. Extrusion and mechanical properties of highly filled cellulose fiber- polypropylene composites. Compos A2007; 38: 1922–1931.
32.
VargaJ. Supermolecular structure of isotactic polypropylene. J Mater Sci1992; 27: 2557–2579.
33.
PukánszkyBMudraIStaniekP. Relation of crystalline structure and mechanical properties of nucleated polypropylene. J Vinyl Additive Technol1997; 3(1): 53–57.
34.
BengtssonMBaillifMOksmanK. Extrusion and mechanical properties of highly filledcellulose fiber-polypropylene composites. Compos A2007; 38: 1922–1931.
35.
Chen-FKChen-ChiMMHsu-ChiangK. Preparation and characterization of the novel water-crosslinked cellulose reinforced poly(butylene succinate) composites. Compos Sci Technol2006; 66: 2231–2241.
JamalSMAhmadIAbdullahI. Effect of rice husk filler on the mechanical and thermal properties of natural rubber compatibilized high density polyethylene/natural rubber blends. J Polym Res2006; 13: 315–321.
38.
FelixJMGatenholmP. Effect of compatibilizing agents on the interfacial strength in cellulose–polypropylene compositesACS, Washington, DC, Atlanta, GA, 1991; 123–124.
39.
KazayawokoMBalatineczJJWoodhamsRT. Diffuse reflectance Fourier transform infrared spectra of wood fibers treated with maleated polypropylenes. J Appl Polym Sci1997; 66: 1163–1173.
40.
MatuanaLMBalatineczJJSodhiRNS. Surface characterization of esterified cellulosic fibers by XPS and FTIR spectroscopy. Wood Sci Technol2001; 5: 191–201.
41.
KamalBAShushengPMarkPS. Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE). Compos: Part B2008; 39: 807–815.
