The use of woven textile reinforcements in composite structures increased significantly in the past decades due to their interesting properties over unidirectional fibres. Therefore, the prediction of the thermo-mechanical properties of woven fabric composites is essential from a design and manufacturing standpoint. A micromechanical approach based on finite element method that utilizes three-dimensional unit cell was applied to predict the effective properties of a periodic woven fabric composite material. Using the resin processing properties models such as cure kinetics, shrinkage, glass transition temperature and elastic modulus models, the development of the periodic woven fabric composite material thermo-mechanical properties, as the cure progresses was predicted. The residual strains and stresses generated in the composite unit cell during the cure were also predicted and linked with the development of the material properties. The effective properties of the cured woven fabric composite material were compared to the one of an equivalent cross-ply composite material to verify the validity of neglecting the fibre waviness while modelling woven fabric composite.
WhitcombJDChapmanCDTangX. Derivation of boundary conditions for micromechanics analyses of plain and satin weave composites. J Compos Mater2000; 34(9): 724–747.
20.
XiaZZhangYEllyinF. A unified periodical boundary conditions for representative volume elements of composites and applications. Int J Solids Struct2003; 40: 1907–1921.
21.
XiaZZhouCYongQ. On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites. Int J Solids Struct2006; 43(2): 266–278.
22.
GlaessgenEHPastoreCMGriffinOH. Geometrical and finite element modelling of textile composites. Composites Part B1996; 27(1): 43–50.
23.
DasguptaABhandarkarSM. Effective thermomechanical behavior of plain-weave fabric-reinforced composites using homogenization theory. J Eng Mater Technol1994; 116(1): 99–105.
24.
GolestanianHEl-GizawyAS. Modeling of process induced residual stresses in resin transfer molded composites with woven fiber mats. J Compos Mater2001; 35(17): 1513–1528.
25.
HuangXGillespieJWJrBogettiT. Process induced stress for woven fabric thick section composite structures. Compos Struct2000; 49(3): 303–312.
26.
GolestanianHSherif El-GizawyA. Cure dependent lamina stiffness matrices of resin transfer molded composite parts with woven fiber mats. J Compos Mater1997; 31(23): 2402–2423.
27.
SvanbergJMAltkvistCNymanT. Prediction of shape distortions for a curved composite C-spar. J Reinf Plast Compos2005; 24(3): 323–339.
Cytec Industries, Inc. CYCOM 5215 data sheet, www. cytec.com (2010, accessed January 2010).
31.
Cytec Industries, Inc. CYCOM 890RTM data sheet, www.cytec.com (2010, accessed January 2010).
32.
Covergent Manufacturing Technologies Inc. COMPRO product, www.convergent.ca (2010, accessed January 2010).
33.
KhounLCenteaTHubertP. Characterization methodology of thermoset resins for the processing of composite materials – case study: CYCOM 890RTM epoxy resin. J Compos Mater2010; 44(11): 1397–1415.
34.
ASTM D3171-06:2006. Standard test method for constituent content of composite material.
35.
ASTM Standard D790:2003. Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials.
36.
Smitheman SA, Jones IA, Long AC, et al. A voxel-based homogenization technique for the unit cell thermomechanical analysis of woven composites. In: Proceedings of the 17th International Conference on Composite Materials (ICCM-17), Edinburgh, UK, 27–31 July 2009.
37.
KhounLHubertP. Investigation of the dimensional stability of carbon epoxy cylinders manufactured by resin transfer moulding. Composites Part A2010; 41(1): 116–124.
