Effects of compatibilizers on mechanical and antibacterial properties of injection molded nano-ZnO filled polypropylene

Abstract

Polypropylene (PP)/zinc oxide (ZnO) nanocomposites were prepared by melt compounding. Prior compounding, surface of the particles were modified with different compatilibizers such as silane and stearic acid. Modification was also done by coating the particles with maleic anhydride grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) block copolymer dissolved in toluene. Specimens of tensile test, impact test, and antibacterial efficiency test were obtained by injection molding. The results showed that stearic acid and silane containing composites gave structures with fine distributed particles while the presence of SEBS-g-MA induced agglomerates. The presence of stearic acid increased tensile strength and impact strength but reduced elastic modulus. Silane was more effective in increasing elastic modulus. Despite the elastomeric nature of SEBS-g-MA, it did not rise impact strength due to its limited amount of usage in coating of the particles. Antibacterial properties of the composites reduced with the increment of ZnO loading because of the weak UV absorption and insufficient photocatalytic activity of the particles. On contrary, at low ZnO content, satisfactorily high antibacterial effect was observed especially in well dispersed structures including stearic acid and silane.

Keywords

Polypropylene nano-ZnO antibacterial property mechanical property

Get full access to this article

View all access options for this article.

References

Breiner

Mark

. Preparation, structure, growth mechanisms and properties of siloxane composites containing silica, titania or mixed silica-titania phases. Polymer 1998; 39: 5486–5493.

McCarthy

Mark

. Synthesis, structure and properties of hybrid organic-inorganic composites based on polysiloxanes. II. Comparisons between poly(methylphenylsiloxane) and poly(dimethylsiloxane) and between titania and silica. J Polym Sci Part B Polym Phys 1998; 36(7): 1191–1200.

Fuad

MYA

Ismail

Ishak

. Application of rice husk ash as fillers in polypropylene: effect of titanate, zirconate and silane coupling agents. Eur Polym J 1995; 31: 885–893.

Kruenate

Tongpool

Panyathanmaporn

. Optical and mechanical properties of polypropylene modified by metal oxides. Surf Interf Anal 2004; 36: 1044–1047.

Hashimoto

Takadama

Mizuno

. Mechanical properties and apatite forming ability of TiO₂ nanoparticles/high density polyethylene composite: effect of filler content. J Mater Sci Mater Med 2007; 18: 661–668.

Chow

Abu Bakar

Mohd Ishak

. Effects of maleic anhydride grafted ethylene propylene rubber on the mechanical, rheological and morphological properties of organiclay reinforced polyamide 6/polypropylene nanocomposites. Eur Polym J 2005; 41: 795–805.

Gonzales

Eguiazabal

Nazabal

. Rubber toughened polyamide 6/caly nanocomposites. Compos Sci Technol 2006; 66(11-12): 1833–1843.

Tjong

Bao

. Fracture toughness of high density polyethylene/sebs-g-ma/montnorillonite nanocomposites. Compos Sci Technol 2007; 67: 317–23.

Wang

Liu

. Preparation of nano-zinc oxide/EPDM composites with both good thermal conductivity and mechanical properties. J Appl Polym Sci 2011; 119: 1144–1155.

10.

Yang

Zhang

Guo

. Study on the phase structures and toughening mechanism in PP/EPDM/SiO₂ ternary composites. Polymer 2006; 47(6): 2106–2115.

11.

Ray

Okamoto

. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 2003; 28: 1539–1641.

12.

Maiti

Lopes

. Tensile properties of polypropylene/kaolin composites. J Appl Polym Sci 1992; 44: 353–360.

13.

Hasegawa

Kawasumi

Kato

. Preparation and mechanical properties of polypropylene–clay hybrids using a maleic anhydride modified propylene oligomer. J Appl Polym Sci 1998; 67: 87–92.

14.

Chi

Lai

Chen

. Investigation on the polyamide 6/organoclay nanocomposites with or without a maleated polyolefin elastomer as a toughener. Polymer 2005; 46: 11600–11609.

15.

Altan M and Yildirim H. Mechanical and morphological properties of polypropylene and high density polyethylene matrix composites reinforced with surface modified nano sized TiO₂ particles. In: International Conference on Materials Science and Engineering, 27–29 October, 2010, Paris, France, pp. 219-224.

16.

Wahit

Hassan

Mohd Ishak

. The effect of polyethylene-octene elastomer on the morphological and mechanical properties of polyamide 6/polypropylene nanocomposites. Polym Polym Compos 2005; 13(8): 795–805.

17.

Hashimoto

Takadama

Mizuno

. Enhancement of mechanical strength of TiO₂/high density polyethylene composites for bone repair with silane coupling. Mater Res Bull 2006; 41: 516–524.

18.

Huang

Chen

Wie

WCJ

. Processing and property improvement of polymeric composites with added ZnO nanoparticles through microinjection molding. J Appl Polym Sci 2006; 102: 6009–6016.

19.

Supaphol

Harnsiri

Junkasem

. Effects of calcium carbonate and its purity on crystallization and melting behavior, mechanical properties, and processability of syndiotactic polypropylene. J Appl Polym Sci 2004; 92: 201–212.

20.

Ahn

Kim

. Mechanical properties of silica nanoparticle reinforced poly(ethylene 2, 6-naphthalate). Macromol Res 2004; 12(3): 293–302.

21.

Garakani

Arefazar

Nazockdast

. Study on morphological, rheological and mechanical properties of PP/SEBS-MA/SGF hybrid composites. J Appl Polym Sci 2007; 104: 2704–2710.

22.

Tjong

Yiu Kwok

. Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites. Compos Sci Technol 2002; 62(6): 831–840.

23.

Tjong

Bao

. Fracture toughness of high density polyethylene/SEBS-G-MA/montnorillonite nano composites. Compos Sci Technol 2007; 67: 317–323.

24.

Wang

Peng

. Study on novel antibacterial high impact polystyrene/TiO₂ nanocomposites. J Mater Sci 2005; 40: 6433–6438.

25.

Fortuny

Bengoa

Font

. Bimetallic catalysts for continuous catalytic wet air oxidation of phenol. J Hazardous Mater 1999; 64: 181–193.

26.

Rana

Rawat

Sorensson

. Antimicrobial function of Nd³⁺-doped anatase titania-coated nickel ferrite composite nano particles: a biomaterial system. Acta Biomater 2006; 2: 421–432.

27.

Yang

Park

. Photocatalysis using ZnO thin films and nanoneedles grown by metal-organic chemical vapor deposition. Adv Mater 2004; 16(18): 1661–1664.

28.

Zhang

Ding

Povey

. ZnO nanofluids – A potential antibacterial agent. Prog Nat Sci 2008; 18: 939–944.

29.

Linsebigler

Yates

. Photooxidation of CH₃Cl on TiO₂(110). A mechanism not involving H₂O. J Phys Chem 1995; 99(19): 7626–7631.

30.

Jiang

. Preparation of ZnO nano-suspension and its antibacterial effect on Escherichia coli. Adv Mater Res 194 - 2011; 196: 689–692.

31.

Sawai

Yoshikawa

. Quantitative evaluation of antifungal activity of metallic oxide powders (MgO, CaO and ZnO) by an indirect conductimetric assay. J Appl Microbiol 2004; 96: 803–809.

32.

Caballero

Whitehead

Allen

. Inactivation of Escherichia coli on immobilized TiO₂ using fluorescent light. J Photochem Photobiol A 2009; 202(2–3): 92–98.

33.

Padmavathy

Vijayaghavan

. Enhanced bioactivity of ZnO nanoparticles—an antimicrobial study. Sci Technol Adv Mater 2008; 9: 1–7.

34.

Brayner

Ferrari-lliou

Brivois

. Toxicological effect of Zno nanoparticles based on bacteria. Nano Lett 2006; 6: 866–870.

35.

Premanathan

Karthikeyan

Jeyasubramanian

. Selective toxicity of ZnO nanoparticles toward gram-positive bacteria and cancer cells by apoptosis through lipid. Nanomed Nanotechnol Biol Med 2011; 7(2): 184–192.

36.

Zhang L, Chen B and Li Z. The applications of nano-ZnO in wastewater treatment. In: International Conference on Electric Technology and Civil Engineering (ICETCE), 2011, Lushan, China, pp. 6945--6948.

37.

Akhavan

Azimirad

Safa

. Functionalized carbon nanotubes in ZnO thin films for photoinactivation of bacteria. Mater Chem Phys 2011; 130(1–2): 598–602.

38.

Hong

. Effects of ZnO nanoparticles on the mechanical and antibacterial properties of polyurethane coatings. Prog Org Coat 2009; 64: 504–509.

39.

Rybnikar

. Interactions in the system isotactic polypropylene–calcite. J Appl Polym Sci 1991; 42(10): 2727–2737.

40.

Papirer

Sculltz

Turchi

. Surface properties of a calcium carbonate filler treated with stearic acid. Eur Polym J 1984; 20: 1155–1158.

41.

Kusmono, Mohd

IZA

Chow

. Compatibilizing effect of SEBS-G-MA on the mechanical properties of different types of OMMT filled polyamide 6/polypropylene nanocomposites. Composites: Part A 2008; 39: 1802–1814.

42.

Haupert

Zhang

. Epoxy nanocomposites with high mechanical and tribological performance. Compos Sci Technol 2003; 63(14): 2055–2067.

43.

Bao

Tjong

. Impact essential work of fracture of polypropylene/montmorillonite nano composites toughened with SEBS-g-MA elastomer. Composites: Part A 2007; 38(3): 378–387.

44.

Sauvet

Dupond

Kazmierski

. Biocidal polymers active by contact. V. Synthesis of polysiloxanes with biocidal activity. J Appl Polym Sci 2000; 75: 1005–1012.

45.

Jones

Ray

Ranjit

. Antibacterial activity of ZnO nanoparticle suspensions on a broad spectrum of microorganisms. Microbiol Lett 2008; 279: 71–76.

46.

Atmaca

Gul

Cicek

. The effect of zinc on microbial growth. Turkish J Med Sci 1998; 28: 595–597.

47.

Doménech

Prieto

. Stability of zinc oxide particles in aqueous suspensions under UV illumination. J Phys Chem 1986; 90: 123–1126.