Influence of Y 2 O 3 particles on mechanical properties of magnesium and magnesium alloy (AZ91D)

Abstract

Nowadays, research studies and industrial requirements are directed toward the goals of achieving environmental friendliness, energy savings, and reduced weight. Magnesium and magnesium alloys are well suited for structural and automotive applications owing to their lightweight. However, the reduced hardness and strength of these alloys do pose problems in exploiting their usage. These impediments of lightweight metal matrix can be alleviated by reinforcing hard-phase particles. Different volume percentages of Y₂O₃ particles (average grain size 5 µm) were added as reinforcements in pure magnesium and magnesium alloy (AZ91D) and the composites were processed through the two-step stir-casting technique. Mechanical and metallurgical characterization studies were carried out on the stir-cast composites under as-cast and heat-treated conditions. Uniform distribution of yttria particles in magnesium and magnesium alloy matrix was observed through scanning electron micrographs. Macro and microhardness tests revealed the increased hardness with the increased amount of yttria reinforcement.

Keywords

Metal matrix composites mechanical properties X-ray diffraction scanning electron microscope

Get full access to this article

View all access options for this article.

References

Nguyen

Fan

Tun

. An investigation into the capability of unconventional amount of aluminum and nano-alumina to alter the mechanical response of magnesium. J Mater Sci 2011; 47(1): 234–240. DOI: 10.1007/s10853-011-5790-3.

Pedersen

Ramulu

. Facing SiCp/Mg metal matrix composites with carbide tools. J Mater Process Technol 2006; 172: 417–423.

Garces

Onorbe

Perez

. Evolution of internal strain during plastic deformation in magnesium matrix composites. Mater Sci Eng A 2009; 523: 21–26.

Tun

Gupta

. Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method. Compos Sci Technol 2007; 67: 2657–2664.

Garcés

Rodríguez

Pérez

. Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg-Y₂O₃ composites. Mater Sci Eng A 2006; 419: 357–364.

Han

Dunand

. Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids. Mat Sci Eng A 2000; 277: 297–304.

Tun

Gupta

. Role of microstructure and texture on compressive strength improvement of Mg/(Y₂O₃+ Cu) hybrid nanocomposites. J Compos Mater 2010; 44: 3033–3033.

Goh

Gupta

Wei

. The cyclic deformation behavior of Mg–Y₂O₃ nanocomposites. J Compos Mater 2008; 42: 2039–2039.

Liu

. Review of recent studies in magnesium matrix composites. J Mater Sci 2004; 39: 6153–6171.

10.

Avedesian MM and Baker H. Magnesium and magnesium alloys. Materials Park, OH: ASM International, 1999.

11.

Hashim

Looney

Hashmi

MSJ

. Metal matrix composites: production by stir casting method. J Mater Process Technol 1999; 92–93: 1–7.

12.

Bak

Lee

. Effect of Y and Y2O3 on oxidation of AZ91D Mg alloys between 400℃ and 500℃. Trans Nonferrous Met Soc China 2009; 19: 871–874.

13.

Ravikumar

Blandin

Suery

. Effect of alloying elements on the ignition resistance of magnesium alloys. Scr Mater 2003; 49: 225–230.

14.

Lim

Choh

. Mechanical-properties of Sic particulate reinforced magnesium matrix composites fabricated by melt stirring method. J Jpn Inst Met 1992; 56: 1101–1107.

15.

Lloyd

. Particle-reinforced aluminum and magnesium matrix composites. Int Mater Rev 1994; 39: 1–23.

16.

Hassan

Gupta

. Development of high performance magnesium nano-composites using nano-Al₂O₃ as reinforcement. Mater Sci Eng A 2005; 392: 163–168.

17.

Sahoo

Poddar

Srivastava

. Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process. Mater Sci Eng A 2007; 460: 357–364.