Numerical investigation of composite materials reinforced with waved carbon nanotubes

Abstract

This paper studies the extent to which the effective stiffness of composite materials can be impacted by the characteristic waviness of nanotubes embedded in polymers. A three-dimensional finite element model is used to investigate the effect of volume fraction and waviness on mechanical properties, i.e. Young’s modulus and Poisson’s ratio, of composites reinforced with waved carbon nanotubes. According to the obtained results, the nanotube waviness causes a decrease in the longitudinal and transverse Young’s modulus of composites, compared to the straight nanotube reinforcement, but the change in the value of transverse Young’s modulus (E_yy) is less remarkable than the longitudinal Young’s modulus (E_xx). Furthermore, the effect of fiber curvature on Poisson’s ratio has also been studied. The results show that the curvature has not much effect on Poisson’s ratio and when a fiber curvature changes, Poisson’s ratio value almost remains unchanged. In addition, the effect of fiber volume fraction on the longitudinal Young’s modulus and major Poisson’s ratio has been studied. As the mesh density may have a significant role in evaluating the model, several different meshes have been generated in order to predict their effect on the mechanical properties of the composite.

Keywords

Carbon nanotube composite materials elastic properties of composite fiber waviness FEM

Get full access to this article

View all access options for this article.

References

Iijima

. Helicoidal microtubes of graphitic carbon. Nature 1991; 354: 56–58.

. Elastic properties of single and multilayered nanotubes. J Phys Chem Solids 1997; 58(11): 1649–1652.

Thostenson

Reng

Chou

. Advances in the science and technology of carbon nanotubes and their composites: a review. Compos Sci Technol 2001; 61: 1899–1912.

Krishnan

Dujardin

Ebbesen

. Young’s modulus of single-walled nanotubes. Phys Rev B 1998; 58: 14013–14019.

Wong

Sheehan

Lieber

. Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science 1997; 277: 1971–1975.

Xiao

Gama

Gillespie

. An analytical molecular structural mechanics model for the mechanical properties of carbon nanotubes. Int J Solids Struct 2005; 42: 3075–3092.

Qian

Wagner

Liu

. Mechanics of Carbon nanotubes. Appl Mech Rev 2002; 55: 495–533.

Wang

Zhang

Xia

. Effective bending modulus of carbon nanotubes with rippling deformation. Int J Solids Struct 2004; 41: 6429–6439.

Qian

Liu

Subramoney

. Effect of interlayer potentialon mechanical deformation of multiwalled carbon nanotubes. J Nanosci Nanotechnol 2003; 3(1/2): 185–191.

10.

Odegard GM, Gates TS, Nicholson LM, et al. Equivalent–continuum modeling with application to carbon nanotubes. NASA/TM-2002-211454. Hampton, VA: NASA Langley Research Center, 2002.

11.

Odegard GM, Gates TS, Nicholson LM, et al. Equivalent–continuum modeling of nano-structured materials. NASA/TM-2001-210863. Hampton, VA: NASA Langley Research Center, 2001.

12.

Chou

. Modeling of elastic buckling of Carbon nanotubes by molecular structural mechanics approach. Mech Mater 2004; 36(11): 1047–1055.

13.

Qian

Dickey

Andrews

. Load transfer and deformation mechanisms in carbon nanotube–polystyrene composites. Appl Phys Lett 2000; 76: 2868–2890.

14.

Zhao

Bai

. Direct growth of carbon nanotubes on the surface of ceramic fibers. Carbon 2005; 43: 855–894.

15.

Wang

Xiao

. A non-linear analysis of the bending modulus of carbon nanotubes with rippling deformation. Compos Struct 2005; 69: 315–321.

16.

Wang

Yang

Yin

. Axially critical load of multiwall carbon nanotubes under thermal environment. J Therm Stresses 2005; 28: 185–196.

17.

Garala HJ. Experimental evaluation of graphite-epoxy composite cylinders subjected to external hydrostatic compressive loading. In: Proceedings of the 1987 SEM spring conference on experimental mechanics. Houston, Texas, Society for Experimental Mechanics, Bethel, CT, June 14–19, 1987; pp.948--951.

18.

Garala HJ. Structural evaluation of 1-inch diameter graphite-epoxy composite cylinders subjected to external hydrostatic compressive loading. Bethesda, MD: Ship Structures and Protection Department R&D Report DTRC-89/106, David Taylor Research Center, 1989.

19.

Tamopol’skii

Portnov

Zhigun

. Effect of fiber misalignment on elasticity modulus in extension of unidirectional glass-reinforced plastic. Polym Mech 1967; 3(5): 567–570.

20.

Hsiao

Daniel

. Elastic properties of composites with fiber waviness. Compos Part A 1996; 27(10): 931–941.

21.

Garnich

Karami

. Finite element micromechanics for stiffness and strength of wavy fiber composites. J Compos Mater 2004; 38(4): 273–292.

22.

Davis JG. Compressive strength of fiber-reinforced composite materials. In: Edward M. Wu Composite reliability. Philadelphia, PA: ASTM STP 580, American Society for Testing and Materials, 1975, pp.364–377.

23.

Pantano

Modica

Cappello

. Multiwalled carbon nanotube reinforced polymer composites. Mater Sci Eng A 2008; 486: 222–227.

24.

Fisher

Bradshaw

Brinson

. Fiber waviness in nanotube-reinforced polymer composites-I: modulus prediction using effective nanotube properties. Compos Sci Technol 2003; 63: 1689–1703.

25.

Liu

Nishimura

Otani

. Large-scale modeling of carbon nanotube composites by a fast multipole boundary element method. Comput Mater Sci 2005; 34: 173–187.

26.

Rahmandoust

Öchsner

. Influence of structural imperfections and doping on the mechanical properties of single-walled carbon nanotubes. J Nano Res 2009; 6: 185–196.

27.

Kew

. Mechanics of composite materials, 2nd edn. Philadelphia, PA: Taylor & Francis Group, LLC, 2006.