Validation of algorithms for delamination detection in composite structures using experimental data

This research work deals with aspects concerned with delamination detection in composite structures as revealed by an approach based on vibration measurements. Variations in vibration characteristics generated in composite laminates indicate the existence of delaminations because degradation due to delamination causes reduction in flexural stiffness and strength of the material and as a result vibration parameters like natural frequency responses are changed. Hence, it is possible to monitor the variation in natural frequencies to identify the presence of delamination, and assess its size and location for online structural health monitoring (SHM). The approach to this paper, therefore, typically depends on undertaking the analysis of structural models implemented by finite element analysis (FEA). The numerical solutions using FE models known as the simulator computes the natural frequencies for the delaminated and undelaminated specimens of composite laminates. However, these FE models are computationally expensive, and surrogate (approximation) models are introduced to curtail the computational expense. The simulator is employed to solve the inverse problem using algorithms based on computational intelligence concepts. An artificial neural network (ANN) model is developed to also solve the inverse problem for delamination detection directly and to provide surrogate models integrated with optimization algorithms (the gradient-based local search and non-dominated sorting genetic algorithm-II) to contain the computationally expensive simulations by FEA. This approach is termed as surrogate assisted optimization and it is seen that the engagement of surrogate models in lieu of the FE models in the optimization loop greatly enhances the accuracy of delamination detection results within an affordable computational cost and provides control over handling different variables. Meanwhile, to aid with the building of effective surrogate models using substantial number of training datasets, K-means clustering algorithm is harnessed and this effectively reduces the large training datasets usually required for ANN training. This paper demonstrated that ANN and optimization algorithms with surrogates show immense potentialities for use in delamination damage detection scenarios. Prediction errors of the algorithms were quantified and they were shown to be satisfactory when applied to previously experimental data. The algorithms in their inverse formulations are capable of predicting accurately delamination parameters. Hence, these algorithms should be employed for application in the domain of SHM where their small computational requirements could be exploited for online damage detection.