Effects of water immersion ageing on the mechanical properties of flax and jute fibre biocomposites evaluated by nanoindentation and flexural testing

Abstract

Flax and jute fibres are inexpensive and easily available bast fibres and they are extensively used as reinforcement in polymer matrix composites. However, due to their susceptibility to moisture absorption, their application is restricted to non-structural interior products. In this study, flax- and jute fibre-reinforced bioresin-based epoxy biocomposites were fabricated using hand lay-up method and their nanoindentation and flexural properties were investigated. In order to study the effects of water absorption on the nanoindentation and flexural properties, the biocomposites were subjected to water immersion tests by immersing specimens in a de-ionised water bath at 25℃ for a period of 961 h. The nanoindentation behaviour and flexural properties of water-immersed specimens were evaluated and compared alongside with dry specimens. The percentage of moisture uptake and diffusion coefficient (D) was recorded higher for jute-reinforced specimens compared with flax. The flexural properties for both types of specimens were found to decrease with increase in percentage moisture uptake. Comparison of flexural strength and flexural modulus between flax dry and flax wet biocomposites showed that wet samples lost almost 40% of strength and 69% of modulus compared with dry flax samples. The jute wet samples lost 60% of strength and 80% of modulus compared with dry samples. The nanohardness value decreased from 0.207 to 0.135 GPa for dry flax sample after immersion in water.

Keywords

Biocomposites natural fibre composites mechanical properties flexural properties hand lay-up method water absorption

Get full access to this article

View all access options for this article.

References

Faruk

Bledzki

Fink

. Biocomposites reinforced with natural fibres: 2000-2010. Prog Polym Sci 2012; 37: 1552–1596.

Bledzki

Gassan

. Composites reinforced with cellulose based fibers. Prog Polym Sci 1999; 24(2): 221–274.

Behzad

Sain

. Finite element modeling of polymer curing in natural fiber reinforced composites. Compos Sci Technol 2007; 67(7-8): 1666–1673.

Dhakal

Zhang

Richardson

MOW

. Creep behaviour of natural fibre reinforced unsaturated polyester composites. J Biobased Mater Bioenergy 2009; 3: 1–6.

Bolton

. The potential of plant fibres as crops for industrial use. Outlook Agric 1995; 24: 85–89.

Shahzad

. Hemp fibre and its composites-a review. J Comp Mater 2012; 46: 973–986.

Dhakal

Zhang

Richardson

MOW

. The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites. Compos Struct 2007; 81(4): 559–567.

Panthapulakkal

Sain

. Studies on the water absorption properties of short hemp-glass fibre hybrid polypropylene composites. J Comp Mater 2007; 41: 1871–1883.

Thwe

Liao

. Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites. Compos Part A: Appl Sci Manufac 2002; 33: 43–52.

10.

Gassan

Bledzki

. Effect of moisture content on the properties of silanized jute-epoxy composites. Polym Compos 1997; 18(2): 179–184.

11.

Chen

Miao

Ding

. Chemical treatments of bamboo to modify its moisture absorption and adhesion to vinyl ester resin in humid environment. J Compos Mater 2011; 45: 1533–1542.

12.

Chow

CPL

Xing

RKY

. Moisture absorption studies of sisal fibre reinforced polypropylene composites. Compos Sci Technol 2007; 67(2): 306–313.

13.

Dhakal

Zhang

Richardson

MOW

. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol 2007; 67(7/8): 1674–1683.

14.

Gregory

Spearing

. Nanoindentation of neat and in situ polymers in polymer-matrix composites. Compos Sci Technol 2005; 65: 595–607.

15.

Randall

Harris

. Nanoindentation as a tool for characterising the mechanical properties of tribological transfer films. Wear 2000; 245(1/2): 196–203.

16.

Farrissey

McHugh

. Determination of elastic and plastic material properties using indentation: development of method and application to a thin surface coating. Mater Sci Eng A 2005; 399: 254–266.

17.

Dhakal

Zhang

Richardson

MOW

. Nanoindentation behaviour of layered silicate reinforced unsaturated polyester nanocomposites. Polym Test 2006; 25: 846–852.

18.

Aldousiri

Dhakal

Onuh

. Nanoindentation behaviour of layered silicate filled spent polyamide-12 nanocomposites. Polym Test 2011; 30: 688–692.

19.

Bourmaud

Baley

. Effects of thermo mechanical processing on the mechanical properties of biocomposite flax fibers evaluated by nanoindentation. Polym Degrad Stabil 2010; 95: 1488–1494.

20.

BS EN ISO 62: 1999. Plastics – determination of water absorption.

21.

Oliver

Pharr

. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 1992; 7(6): 1564–1583.

22.

Espert

Vilaplana

Karlsson

. Comparison of water absorption in natural cellulosic fibres from wood and one year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A: Appl Sci Manufac 2004; 35: 1267–1276.

23.

Mohanty

Misra

Hinrichsen

. Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 2000; 276–277(1): 1–24.

24.

Fakirov

Bhattacharya

. Engineering biopolymers: homopolymers, blends and composites, Auckland, New Zealand: Hanser Gardner Publications, 2007.

25.

Tajvidi

Ebrahimi

. Water uptake and mechanical characteristics of natural fibre polypropylene composites. J Appl Polym Sci 2003; 88: 941–946.