This study, part of the European JTI ‘Clean sky’, presents a simulation model designed to predict the evolution of the degree of cure of the paste adhesives used in carbon fiber reinforced polymer bonded systems cured by induction heating. The simulation combines induced Eddy currents in electrical conductive materials, which cause the heating of the carbon fiber reinforced polymer adherents by Joule effect, and the consequent chemical reaction which gives the relation between temperature, time and degree of cure of the adhesive. The model is validated and used to analyze the impact of different parameters on the degree of cure of the paste adhesive.
MahdiSKimHGamaB. A comparison of oven-cured and induction-cured adhesively bonded composite joints. J Compos Mater2003; 37(6): 519–542.
2.
KarpushkinSKarpovSGlebovA. Modeling of induction heating devices in examples of induction heating platens of vulcanization presses. Becthиκ TΓTY2011; 17(1): 110–120.
3.
TayTFinkBMcKnightS. Accelerated curing of adhesives in bonded joints by induction heating. J Compos Mater1997; 33(17): 1643–1664.
4.
ChaboudezCClainSGlardonR. Numerical modelling, heating of long workpieces. IEEE Trans Magnetic1994; 33(6): 5028–5037.
5.
IstardiDTriwinarkoA. Induction heating process design using COMSOL Multiphysics Software. TELKOMNIKA2011; 9(2): 327–334.
6.
BarkaNBocherPBrosseauJ. Modeling and sensitivity study of the induction hardening process. Adv Mater Res2007; 15–17: 525–530.
7.
MitschangPVethuisREmrichS. Induction heated joining of aluminum and carbon fiber reinforced nylon 66. J Thermoplast Compos Mater2009; 22(6): 767–804.
8.
KarkanasPPartridgeI. Modeling the cure of a commercial epoxy resin for applications in resin transfer molding. Polymer Int1996; 41(1): 183–191.
9.
IrrgangCVogtJ. Numeric simulation of epoxy cure in molds. J Thermal Anal1991; 37(1): 1841–1849.
10.
González C, Rojas R and Rubinsky B. Circular and magnetron inductor/sensor coils to detect volumetric brain edema by inductive phase shift, spectroscopy: A sensitivity simulation study. In: ICEBI 2007, IFMBE Proceedings 17, Margarita Island, Venezuela, 2007, pp. 315–319.
11.
ClevelandC. Encyclopedia of energy, 1st edn. San Diego: Elsevier, 2004, pp. 673–673.
12.
DelegliseMSimacekPBinetruyC. Determination of the thermal dispersion coefficient during radial filling of a porous medium. J Heat Transf2003; 125(5): 875–881.
13.
BergmanTLavineAIncroperaF. Fundamentals of heat and mass transfer, 7th edn. New Jersey: John Wiley & Sons, 2011, pp. 9–9.
14.
RazakAHameedASultanS. Modeling of the cure of epoxy based composite, heated at constant temperature in cylindrical mould. Diyala J Eng Sci2011; 4(1): 1–11.
15.
SkordosAPartridgeI. Inverse heat transfer for optimization and on-line thermal properties estimation in composites curing. Inverse Prob Sci Eng2004; 12(1): 157–172.
16.
Verclos O, Scobbie K, Tsotra P, et al. Toughened epoxy paste adhesives for aerospace applications. In: International conference on composite materials 17, Edinburgh, UK, 2009.
17.
RudolfRMitschangPNeizelM. Induction heating of continuous carbon-fibre-reinforced thermoplastics. Compos Part A2000; 31(1): 1191–1202.
18.
Sánchez Cebrián A, Basler R, Zogg M, et al. Multistep heating to optimize curing process of a paste adhesive. In: 15th European conference on composite materials, Venice, IT, 2012.
19.
KlunkerFWuWArandaW. Composites in automotive applications: simulation of leaf spring processing. SAMPE 2011. Long Beach, CA, 2011, 2011.
20.
Park J, Cheng Q, Lu J, et al. High thermal conductivity of carbon nanotube sheet/epoxy composite. In: 18th International conference on composite materials, Jeju, KO, 2011.
21.
BejanAKrausA. Heat transfer Handbook, 1st edn. New Jersey: John Wiley & Sons, 2003, pp. 959–959.
22.
SomS. Introduction to heat transfer, 1st edn. New Delhi: PHI Learning Private Limited, 2008, pp. 281–303.
23.
BonalsLl. Transferència de calor, 1st edn. Barcelona: Publicacions d’Abast, 2005, pp. 153–153.
24.
ZhaoLHux. A variable reaction order model for prediction of curing kinetics of thermosetting polymers. Polymers2007; 48(1): 6125–6133.
25.
ChenYMacosckoC. Kinetics and rheology characterization during curing of dicyanates. J Appl Sci1996; 62(1): 567–576.
26.
PascaultJWilliamsR. Glass transition temperatures versus conversion relationships for thermosetting polymers. J Polymer Sci: Part B Pylomer Phys1990; 28(1): 85–95.
27.
DomínguezJOlietMAlonsoM. Isothermal rheokinetic study of a precured resol resin beyond gelation by torsion. J Appli Polymer Sci2011; 123(1): 2107–2114.
28.
SolderaAMetatlaN. Glass transition of polymers: Atomistic simulation versus experiments. Phys Rev E2006; 74(6): 061803(6)–061803(6).
