In this study, the notched strengths of woven hybrid composite laminates each with a center circular hole were investigated. The effective engineering moduli of the composite laminate were first predicted by the spring model method and the stiffness averaging method. Then, a finite element-based point stress criterion proposed previously by the authors was employed to predict the notched strengths of those woven hybrid composite laminates each with a center circular hole. It is shown that the predicted notched strengths by this approach agree well with the experimental results. It is also noted that the notched strength decreases with the radius of the center circular holes for both the drilling and water jet cases. However, the decreasing rate of the notched strength for water jet is obviously higher than those for drilling.
ErikssonIAronssonCG. Strength of tensile loaded graphite/epoxy laminates containing cracks, open and filled holes. J Comp Mater1990; 24: 456–481.
16.
Afaghi-KhatibiAYeLMaiYW. An effective crack growth model for residual strength evaluation of composite laminates with circular holes. J Comp Mater1996; 30: 142–163.
17.
KostopoulosVPappasYZ. Notched strength prediction of centre-hole carbon/carbon composites. Mat Sci Eng A-Struct1998; 250: 320–327.
18.
PottiPKGRaoBNSrivastavaVK. Notched tensile strength for long- and short-fiber reinforced polyamide. Theor Appl Fract Mech2000; 33: 145–152.
19.
de MoraisAB. Open-hole tensile strength of quasi-isotropic laminates. Comp Sci Technol2000; 60: 1997–2004.
20.
ChenPShenZWangJY. Prediction of the strength of notched fiber-dominated composite laminates. Comp Sci Technol2001; 61: 1311–1321.
21.
OlssonRIwarssonJMelinLG. Experiments and analysis of laminates with artificial damage. Comp Sci Technol2003; 63: 199–209.
22.
WhitworthHAAlukoOTomlinsonNA. Application of the point stress criterion to the failure of composite pinned joints. Eng Fract Mech2008; 75: 1829–1839.
23.
BailieJADugganMFFisherLM. Effects of holes on graphite cloth epoxy laminates tension strength. J Aircraft1982; 19: 559–566.
ShembekarPSNaikNK. Notched strength of fabric laminates II: effect of stacking sequence. Comp Sci Technol1992; 44: 13–20.
28.
XiaoJYBathiasC. Damage and fracture of notched non-woven and woven composite laminates. Comp Sci Technol1994; 52: 99–108.
29.
KimJKKimDSTakedaN. Notched strength and fracture criterion in Fabric composite plates containing a circular hole. J Comp Mater1995; 29: 982–998.
30.
de Azevedo SorianoEde AlmeidaSFM. Notch sensitivity of carbon/epoxy fabric laminates. Comp Sci Technol1999; 59: 1143–1151.
31.
BelmonteHMSMangerCICOginSL. Characterization and modelling of the notched tensile fracture of woven quasi-isotropic GFRP laminates. Comp Sci Technol2001; 61: 585–597.
32.
SrivastavaVK. Notched strength prediction of laminated composite under tensile loading. Mat Sci Eng A-Struct2002; 328: 302–309.
33.
PanditaSDNishiyabuKVerpoestI. Strain concentrations in woven fabric composites with holes. Compos Struct2003; 59: 361–368.
34.
ToubalLKaramaMLorrainB. Stress concentration in a circular hole in composite plate. Compos Struct2005; 68: 31–36.
35.
AhmedKSVijayaranganSNaiduACB. Elastic properties, notched strength and fracture criterion in untreated woven jute-glass fabric reinforced polyester hybrid composites. Mater Design2007; 28: 2287–2294.
36.
RaoBSRudramoorthyRSrinivasS. Effect of drilling induced damage on notched tensile and pin bearing strengths of woven GFR-epoxy composites. Mat Sci Eng A-Struct2008; 472: 347–352.
37.
KazemahvaziKZenkertDBurmanM. Notch and strain rate sensitivity of non-crimp fabric composites. Comp Sci Technol2009; 69: 793–800.
38.
HwanCLTsaiKHChenWL. Strength prediction of braided composite plates with a center hole. J Comp Mater2011; 45: 1991–2002.
39.
TsaiKHHwanCLLinMJ. Finite element based point stress criterion for predicting the notched strengths of composite plates. J Mech2012; 28: 391–396.
40.
Hwan CL, Tsai KH, Chiu CH, et al. Strength prediction of braided composite plates with lateral holes by a finite element based point stress criterion. J Comp Mater 2013; 47(9): 1161–1168.
41.
AyranciCCareyJ. 2D braided composites: A review for stiffness critical applications. Compos Struct2008; 85: 43–58.
42.
TsaiKHHwanCLChenWL. A parallelogram spring model for predicting the effective elastic properties of 2d braided composites. Compos Struct2008; 83: 273–283.
43.
KregersAFMelbardisYG. Determination of the deformability of three- dimensionally reinforced composites by the stiffness method. Polymer Mech1978; 14(1): 3–8.
