Delaminations buckling and growth phenomena in stiffened composite panels under compression. Part II: a numerical study

Abstract

A numerical study has been carried out on stiffened composite panels under compression, focusing on the delamination-related phenomena. A robust numerical finite elements model has been introduced to simulate the compression behavior of the panel, including the delamination buckling and growth, and to provide reasonable predictions of the strain measurements in the delaminated area. The robustness of the novel approach, which adopts an improved (mesh and time step independent) virtual crack closure technique for the simulation of the delamination propagation, has been demonstrated by comparisons with standard commercial FEM (Finite Element Method) codes results and experimental data. Indeed, the numerical results, in terms of strains and delamination size as a function of the applied load, have been compared to experimental strain gauges readings, embedded optical fibers measurements, and thermography images of the delamination taken at different load steps. Actually, the performed numerical activity contributed to improve the knowledge on delamination-related phenomena in stiffened composite panels, focusing on delamination growth initiation and delamination growth stability, by providing reasonable justifications and interpretations of experimental strain measurements and thermography images.

Keywords

Layered structures delamination finite element analysis optical fibers monitoring

Get full access to this article

View all access options for this article.

References

Whitcomb

. Approximate analysis of postbuckled through-the-width delaminations. Compos Technol Rev 1982; 4(3): 71–77.

Whitcomb

. Parametric analytical study of instability-related delamination growth. Compos Sci Technol 1986; 25(1): 18–48.

Chai

Babcok

Knauss

. One delamination modelling of failure in laminated plates by delamination buckling. Int J Solids Struct 1981; 17(1): 1069–1083.

Kim HJ and Hong CS. Buckling and postbuckling behaviour of composite laminates with an embedded delamination. In: Procedings of ICCM-10, Whistler, BC, Canada, 14–18 August 1995. University of Zaragoza, woodhead publishing limited.

Whitcomb

. Analysis of a laminate with a postbuckled embedded delamination, including contact effects. Int J Compos Mater 1992; 26(10): 1523–1535.

Whitcomb

. Three dimensional analysis of a postbuckled embedded delamination. Int J Compos Mater 1989; 23: 862–889.

Zor

Sen

Toygar

. An investigation of square delamination effects on the buckling behavior of laminated composite plates with a square hole by using three-dimensional FEM analysis. J Reinf Plast Compos 2005; 24: 1119–1130.

Krueger R. The virtual crack closure technique: History, approach and applications. NASA/Contractor Report-2002-211628, 2002. Hampton, VA, US: NASA Langley Research Center.

Suemasu

Kurihara

Arai

. Compressive property degradation of composite stiffened panel due to debonding and delaminations. Adv Compos Mater 2006; 15(2): 139–151.

10.

Pietropaoli

Riccio

. On the robustness of finite element procedures based on virtual crack closure technique and fail release approach for delamination growth phenomena. Definition and assessment of a novel methodology. Compos Sci Technol 2010; 70: 1288–13003.

11.

Camanho

Dávila

De Moura

. Numerical simulation of mixed-mode progressive delamination in composite materials. J Compos Mater 2003; 37(16): 1415–1438.

12.

Turon

Dávila

Camanho

. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng Fract Mech 2007; 74(10): 1665–1682.

13.

Chen

. Prediction of the cohesive strength for numerically simulating composite delamination via CZM-based FEM. Compos Part B: Eng 2011; 42(5): 1076–1083.

14.

Pietropaoli

Riccio

. Formulation and assessment of an enhanced finite element procedure for the analysis of delamination growth phenomena in composite structures. Compos Sci Technol 2011; 71: 836–846.

15.

Riccio A, Raimondo A and Scaramuzzino F. A study on skin delaminations growth in stiffened composite panels by a novel numerical approach. Appl Compos Mater 2013; 20(4): 465–488.

16.

Riccio A, Raimondo A, Fragale S, et al. Delaminations buckling and growth phenomena in stiffened composite panels under compression. Part I: an experimental study. Submitted to J Compos Mater. 2014; 48(23): 2843–2855.

17.

Riccio

Di Caprio

Camerlingo

. Position of embedded optical fibres sensors for the monitoring of buckling in stiffened composite panels. Appl Compos Mater 2013; 20(1): 73–86.

18.

ANSYS MANUAL (revision 5) Volume III: Elements DN-R300:50-3.

19.

Reeder JR. 3-D mixed mode delamination fracture criteria—an experimentalist's perspective. NASA/Contractor. Report 20060048260, 2006. Hampton, VA, US: NASA Langley Research Center.

20.

. Evaluation of mode-I inter-laminar fracture toughness for fiber-reinforced composite materials. Compos Sci Technol 1992; 43: 49–54.

21.

Wang

Williams

. Corrections for mode II fracture toughness specimens of composites materials. Compos Sci Technol 1992; 43: 251–256.

22.

Suemasu

. An experimental method to measure the mode-III inter-laminar fracture toughness of composite laminates. Compos Sci Technol 1999; 59: 1015–1021.

23.

Xie

Biggers

. Strain energy release rate calculation for a moving delamination front of arbitrary shape based on the virtual crack closure technique. Part I: formulation and validation. Eng Fract Mech 2006; 73: 771–785.

24.

Xie

Biggers

. Strain energy release rate calculation for a moving delamination front of arbitrary shape based on the virtual crack closure technique. Part II: sensitivity study on modeling details. Eng Fract Mech 2006; 73: 786–801.

25.

Shivakumar

Tan

Newman

Jr . A virtual crack closure technique for calculating stress intensity factors for cracked three dimensional bodies. Int J Fract 1988; 36: 43–50.