Acrodur solution and dispersion have been developed as alternative wood adhesives to phenolic and urea formaldehyde resins. They are non-corrosive and do not emit carcinogenic gases. Contrary to most resins used in natural plant fibre composites, Acrodur has superior tolerance to moisture during composite fabrication and thus drying of the preforms may be minimised or eliminated. The aim of this study was to produce optimised flax fabric reinforced Acrodur biocomposites by varying the ratio between Acrodur solution and dispersion, relative humidity, curing time and temperature. The optimised biocomposites provided a combination of specific tensile strength 57.9 MPa-cm3/g and specific Young’s modulus 5.5 GPa-cm3/g at a low density 0.91 g/cm3. Thermogravimetric analysis and contact angle measurement showed that the biocomposites had higher thermal stability and hydrophobicity than the fabrics. The low loss of tensile properties upon water immersion was explained by tortuous wicking path in the biocomposites.
BatraSKOther long vegetable fibers. In: LewinMPearceEM (eds). Handbook of fibre science and technology: fibre chemistry, New York: Marcel Dekker, 1998, pp. 505–575.
3.
Lilholt H, Toftegaard H, Thomsen AB, et al. Natural composites based on cellulosic fibres and polypropylene matrix: their processing and characterization. In: Proceedings of ICCM 12, Paris; July 1999, p.9.
4.
KhalilARozmanHDAhmadNN. Acetylated plant-fiber reinforced polyester composites: a study of mechanical, hydrothermal, and aging characteristics. Polym Plast Technol Eng2000; 39(4): 757–781.
5.
US Patent 5993709 - Method for making composite board using phenol formaldehyde binder, US Patent Issued on November 30, 1999, Estimated Patent Expiration Date: June 23, 2018.
6.
Young NoBKimMG. Evaluation of melamine-modified urea-formaldehyde resins as particleboard binders. J Appl Polym Sci2007; 106: 4148–4156.
7.
State of California Environmental Protection Agency, office of environmental health hazard assessment, “Safe drinking water and toxic enforcement act of 1986-Chemicals known to the state to cause cancer or reproductive toxicity” (commonly referred to as “Proposition 65” or Prop 65), September 29, 2006 http://www.oehha.ca.gov/prop65/prop65_list/files/P65single092906.pdf (accessed May 2010).
LiangKGaoQShiSQ. Kenaf/soy protein based biocomposites modified with poly(carboxylic acid) resin. J Appl Polym Sci2013; 128: 1213–1218.
13.
MedinaLSchledjewskiRSchlarbAK. Process related mechanical properties of press molded natural fiber reinforced polymers. Compos Sci Technol2009; 69: 1404–1411.
14.
KaliaSKaithBSKaurI. Pretreatments of natural fibers and their application as reinforcing material in polymer composites—a review. Polym Eng Sci2009; 49: 1253–1272.
15.
Bos HL. The potential of flax fibres as reinforcement for composite materials. PhD Thesis, Thechnische Uni-versiteit Eindhoven, University Press Facilities, Eindhoven, Netherlands, 2004.
16.
GassanJBledzkiAK. Thermal degradation of flax and jute fibers. J Appl Polym Sci2001; 82: 1417–1422.
17.
Van de VeldeKKiekensP. Thermal degradation of flax: the determination of kinetic parameters with thermogravimetric analysis. J Appl Polym Sci2002; 83: 2634–2643.
18.
WielageBLampkeThMarxG. Thermogravimetric and differential scanning calorimetric analysis of natural fibers and polypropylene. Thermochimica Acta1999; 337: 169–177.
19.
Kohler R and Wedler M. Nichttextile Anwendungen von Flachs. In: Proc Techtextil-Symposium 6 (1994). Internatio-nale Tagung: Frankfurt/Main, Germany, 1–8, paper no. 331, 1994.
20.
ChenHMiaoMDingX. Chemical treatments of bamboo to modify its moisture absorption and adhesion to vinyl ester resin in humid environment. J Compos Mater2011; 45(14): 1533–1542.
21.
Miao M, Milanovic N and Shen SZ. Effect of moisture exposure during fabrication on flax/polyester composites. In: 18th International Conference on Composite Materials (ICCM 18), Jeju, Korea, 21–26 August 2011.
22.
ReckBTürkJ. Thermally curable aqueous acrylic resins-a new class of duroplastic binders for wood and natural fibers. Die Angewandte Makromolekulare Chemie1999; 272: 5–10.
23.
OuajaiSShanksRA. Composition, structure and thermal degradation of hemp cellulose after chemical treatments. Polym Degrad Stabil2005; 89: 327–335.
24.
BraunELevinBC. Polyesters: a review of the literature on products of combustion and toxicity. Fire Mater1986; 10: 107–123.
25.
IslamMSPickeringKLForemanNJ. Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp\epoxy composites. J Appl Polym Sci2011; 119: 3696–3707.
