Effects of reinforcing particle size and interface bonding strength on tensile properties and fracture behavior of Al-A206/alumina micro/nanocomposites
Restricted accessResearch articleFirst published online November, 2014
Effects of reinforcing particle size and interface bonding strength on tensile properties and fracture behavior of Al-A206/alumina micro/nanocomposites
Al-A206/5 vol.% aluminap cast composites were synthesized by the addition of reinforcing particles into molten Al alloy, semi-solid and liquid states, in two different forms: (1) as received alumina particles and (2) pre-synthesized composite reinforcement prepared via milling of alumina with Al and Mg powders (master metal matrix composite). The effects of powder addition technique, reinforcing particle size and interface bonding strength on tensile properties and fracture behavior of Al-A206/5 vol.% aluminap composites were then investigated. It was found that fabrication of Al-A206/aluminap composites by master metal matrix composite addition in the semi-solid state leads to considerable improvement in tensile properties.
KaczmarJWPietrzakKWlosinskiW. The production and application of metal matrix composite materials. J Mater Process Tech2000; 106: 58–67.
2.
TahaMA. Practicalization of cast metal matrix composites (MMCs). Mater Design2002; 22: 431–441.
3.
WangZSongMSunC. Effect of extrusion and particle volume fraction on the mechanical properties of SiC reinforced Al–Cu alloy composites. Mater Sci Eng A2010; 527: 6537–6542.
4.
SchultzBFFergusonJBRohatgiPK. Microstructure and hardness of Al2O3 nanoparticle reinforced Al–Mg composites fabricated by reactive wetting and stir mixing. Mater Sci Eng A2011; 530: 87–97.
5.
DeshmanyaIBPurohitGK. Development of models for predicting impact strength of Al7075/Al2O3 composites produced by stir-casting. J Compos Mater2012; 46: 3247–3253.
6.
MazaheryAOstadshabaniM. Investigation on mechanical properties of nano-Al2O3-reinforced aluminum matrix composites. J Compos Mater2011; 45: 2579–2586.
7.
KokM. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminum alloy composites. J Mater Process Tech2005; 161: 381–387.
8.
RahimianMParvinNEhsaniN. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy. Mater Sci Eng A2010; 527: 1031–1038.
PippleEWoltersdorfJDoktorM. Interlayer structure of carbon fiber reinforced aluminum wire. J Mater Sci2000; 35: 2279–2289.
11.
LeeKBKimYSKwonH. Fabrication of Al-3 Wt Pct Mg matrix composites reinforced with Al2O3 and SiC particulates by the pressureless infiltration technique. Metall Mater Trans A1998; 29A: 3087–3095.
12.
IbrahimIAMohamedFALaverniaEJ. Particulate reinforced metal matrix composites -a review. J Mater Sci1991; 26: 1137–1156.
13.
LloydDJ. Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev1994; 39: 1–39.
14.
FeestEA. Interfacial phenomena in metal-matrix composites. Composites1994; 25: 75–86.
15.
RajanTPDPillaiRMPaiBC. Reinforcement coatings and interfaces in aluminium metal matrix composites. J Mater Sci1998; 33: 3491–3503.
16.
KobashiMChohT. The wettability and the reaction for SiC particle/Al alloy system. J Mater Sci1993; 28: 684–690.
17.
ThamLMGuptaMChengL. Influence of processing parameters during disintegrated melt deposition processing on near net shape synthesis of aluminium based metal matrix composites. Mater Sci Technol1999; 15: 1139–1146.
SuryanarayanaC. Mechanical alloying and milling. Prog Mat Sci2001; 46: 1–184.
20.
Pech-CanulMIKatzRNMakhloufMM. Optimum conditions for pressureless infiltration of SiCp preforms by aluminum alloys. J Mater Process Tech2000; 108: 68–77.
21.
HashimJLooneyLHashmiMSJ. Metal matrix composites: production by the stir casting method. J Mater Process Tech1999; 92-93: 1–7.
22.
DaoudAAbou El-KhairMTAbdel-AzimAN. Effect of Al2O3 particles on the microstructure and sliding wear of 7075 Al alloy manufactured by squeeze casting method. J Mat Eng Perform2004; 13: 135–143.
23.
XiongBXuZYanQ. Fabrication of SiC nanoparticulates reinforced Al matrix composites by combining pressureless infiltration with ball-milling and cold-pressing technology. J Alloys Compd2010; 497: L1–L4.
24.
ZhangHGengLGuanL. Effects of SiC particle pretreatment and stirring parameters on the microstructure and mechanical properties of SiCp/Al–6.8Mg composites fabricated by semi-solid stirring technique. Mater Sci Eng A2010; 528: 513–518.
25.
ConlonKTWilkinsonDS. Effect of particle distribution on deformation and damage of two-phase alloys. Mat Sci Eng A2001; 317: 108–114.
26.
HongSJKimHMHuhD. Effect of clustering on the mechanical properties of SiC particulate reinforced aluminum alloy 2024 metal matrix composites. Mater Sci Eng A2003; 347: 198–204.
27.
ClyneTWWithersPJ. An introduction to metal matrix composites, Cambridge University Press, Cambridge, 1993.
28.
McleodADGabryelCM. Kinetics of the growth of spinel, MgAl204, on alumina particulate in aluminum alloys containing magnesium. Metall Mater Trans A1992; 23A: 1279–1283.
29.
LeeJCAhnJPShiZ. Modification of the interface in SiC/Al composites. Metall Mater Trans A2000; 31A: 2361–2368.
30.
MurtyBSThakurSKDhindawBK. On the infiltration behavior of Al, Al-Li, and Mg melts through SiCp bed. Metall Mater Trans A2000; 31A: 319–325.
31.
HoweJM. Structure and properties of metal/ceramic interfaces - Part 1: chemical bonding, reaction and interfacial structure. Int Mater Rev1993; 38: 233–271.
32.
ShenYLWilliamsJJPiotrowskiG. Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: an experimental and numerical study. Acta Mater2001; 49: 3219–3229.
33.
RomanovaVABalokhonovRRSchmauderS. The influence of the reinforcing particle shape and interface strength on the fracture behavior of a metal matrix composite. Acta Mater2009; 57: 97–107.
34.
CeschiniLMinakGMorriA. Forging of the AA2618/20 vol.% Al2O3p composite: effects on microstructure and tensile properties. Compos Sci Technol2009; 69: 1783–1789.
35.
TohgoKItohYShimamuraY. A constitutive model of particulate-reinforced composites taking account of particle size effects and damage evolution. Compos Part A2010; 41: 313–321.
