The diffuse light transmittance of hand lay-up glass fiber-reinforced polymer (GFRP) laminates was investigated. Spectrophotometric experiments were performed on unidirectional and cross-ply glass fiber-reinforced polymer specimens with fiber volume fractions ranging from 0.20 to 0.45. Numerical ray-tracing analysis was used to investigate the experimentally observed wavelength dependency of the diffuse light transmittance. Refractive index mismatches between glass fibers and resin and the presence of air flaws in the laminates were the major parameters increasing light diffusion. Based on the experimental data, analytical models were developed to predict the translucency (haze) of glass fiber-reinforced polymer laminates as a function of the reinforcement weight and total light transmittance. The developed models demonstrate the feasibility of conceiving glass fiber-reinforced polymer skylights with a translucency of 0.90 and a total light transmittance of 0.50 for the daylighting of energy-efficient buildings. It is also shown that laminates with translucencies of lower than 0.30 satisfy minimum total transmittances of 0.83 as required for the encapsulation of photovoltaic cells.
ASTM Standard E284-12. Standard terminology of appearance, West Conshohocken, PA: American Society for Testing and Materials, August 2012.
4.
HeschongL. Daylighting and human performance. ASHRAE J2002; 44(6): 65–67.
5.
Eckerlin H, Manning M, Atre U, et al. A new daylighting strategy for a middle school in North Carolina. In: Proceedings of Solar 2007: Sustainable energy puts America to work, Cleveland, USA, 7–12 July 2007, pp.734–741. Boulder, CO: ASES.
6.
KesnerCW. Analysis of the museum lighting environment. J Interior Des1997; 23(2): 28–41.
7.
KeelerMBurkeB. Fundamentals of integrated design for sustainable building, Hoboken: John Wiley & Sons, 2009.
8.
2012 International Energy Conservation Code. Washington: International Code Council, 2011.
9.
KellerTVassilopoulosAPManshadiBD. Thermomechanical behavior of multifunctional GFRP sandwich structures with encapsulated photovoltaic cells. J Compos Constr2010; 14(4): 470–478.
10.
PascualCde CastroJSchuelerA. Total light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures. Accepted for publication in J Compos Mater2014; 48(29):3591–3604.
11.
PagliarioMPalmisanoGCiriminnaR. Flexible solar cells, Weinheim: Wiley-VCH, 2008.
12.
Mohring H-D and Stellbogen D. Annual energy harvest of PV systems—advantages and drawbacks of different PV technologies. In: Proceedings of the 23 rd European photovoltaic solar energy conference, Valencia, Spain, 1–5 September 2008, pp.2781–2785. Munich: EU PVSEC.
13.
LarsonGWShakespeareR. Rendering with radiance—the art and science of lighting visualization, Seattle: Randolph M. Fritz, 2011.
14.
AndersenMKleindienstSYiL. An intuitive daylighting performance analysis and optimization approach. Build Res Inf2008; 36(6): 593–607.
15.
SalehBEATeichMC. Fundamentals of photonics, 2nd ed. Hoboken: John Wiley & Sons, 2007.
16.
van de HulstHC. Light scattering by small particles, New York: Dover Publications, 1981.
17.
BachHNeurothN. The properties of optical glass, Berlin: Springer, 1995.
KangSDayDEStofferJO. Measurement of the refractive index of glass fibers by the Christiansen-Shelyubskii method. J Non-Cryst Solids1997; 220(2–3): 299–308.
20.
BatesonS. Critical study of the optical and mechanical properties of glass fibers. J Appl Phys1958; 29(1): 13–21.
21.
CorpusJMGuptaPK. Diameter dependence of the refractive index of melt-drawn glass fibers. J Am Ceram Soc1993; 76(5): 1390–1392.
22.
ASTM Standard D578/D578M-05. Standard specification for glass fiber strands, West Conshohocken, PA: American Society for Testing and Materials, September 2011.
23.
WangLKisterGRalphB. Conventional E-glass fibre light guides: Self-sensing composite based on sol-gel cladding. Smart Mater Struct2004; 13(1): 73–81.
24.
WangLPanditaSMachavaramVR. Characterization of the cross-linking process in an E-glass fibre/epoxy composite using evanescent wave spectroscopy. Compos Sci Technol2009; 69(13): 2069–2074.
TodorokiAHanaNUedaM. Luminance change method for cure monitoring of GFRP. Key Eng Mater2006; 321–323: 1316–1321.
27.
IbaHKagawaY. Light transmittance of continuous fibre-reinforced composites: Analysis, model experiment and parametric study. Philos Mag B1998; 78(1): 37–52.
28.
IbaHNaganumaTMatsumuraK. Fabrication of transparent continuous oxynitride glass fiber-reinforced glass matrix composite. J Mater Sci1999; 34(23): 5701–5705.
29.
DunkersJPParnasRSZimbaCG. Optical coherence tomography of glass reinforced polymer composites. Compos Part A1999; 30(2): 139–145.
30.
Kinsella M, Murray D, Crane D, et al. Mechanical properties of polymeric composites reinforced with high strength glass fibers. In: Proceedings of the 33rd international SAMPE technical conference, Seattle, USA, 5–8 November 2001, pp.1644–1657. Covina, CA: SAMPE.
31.
HechtE. Optics, 4th ed. San Francisco: Addison Wesley, 2002.
32.
Kostro A, Geiger M, Jolissaint N, et al. Embedded microstructures for daylighting and seasonal thermal control. In: Proceedings of SPIE conference, San Diego, USA, 12–14 August 2012, vol. 8485, article number 84850L. Bellingham: SPIE.
33.
CIE 1932. In: Report of activities and proceedings of the Commission Internationale de l'Eclairage, Cambridge, United Kingdom, 14–19 September 1931, pp.25–26. Cambridge: Cambridge University Press.
34.
Jonsson JC and Rubin M. Light-loss when measuring transmittance of thick scattering samples with an integrating sphere. In: Proceedings of SPIE conference, San Diego, USA, 26–30 August 2007, vol. 6670, article number 667007. Bellingham: SPIE.
35.
ASTM Standard G173-03. Standard tables for reference solar spectral irradiances: Direct normal and hemispherical on 37° tilted surface. West Conshohocken, PA: American Society for Testing and Materials, October 2008.
36.
Pélisset S, Joly M, Chapuis V, et al. Efficiency of silicon thin-film photovoltaic modules with a front coloured glass. In: Proceedings of CISBAT international conference, Lausanne, Switzerland, 14–16 September 2011, pp.37–42. Lausanne: LESO-PB.
