Fabrication of nanocomposite polymer-blend electrolytes comprising polyethylene oxide, polyvinyl chloride, lithium perchlorate and titanium dioxide (TiO2) (27.03 nm) has been demonstrated using the famous solvent casting technique. AC impedance measurements were carried out in the frequency range of 1 Hz–10 MHz. The effect of filler on the ionic conductivity is explained on the basis of distribution of TiO2, Lewis acid–base interaction, polymer segment-ion coupling and aggloramation of TiO2. Fourier transform infrared spectroscopy spectra showed the occurrence of complexation and interaction among the components. The crystalline and amorphous phases of the complex were identified through X-ray diffraction. Atomic force microscope pictures of the samples confirmed the plasticizing action of nano TiO2.
ReddyMVSubba RaoGVChowdariBVR. Metal oxides and oxysalts as anode materials for Li ion batteries. Chem Rev2013; 113: 5364–5457.
2.
RajendranSKesavanKNithyaRUlaganathanM. Transport, structural and thermal studies on nanocomposite polymer blend electrolytes for Li-ion battery applications. Curr Appl Phys2012; 12: 789–793.
3.
UlaganathanMNithyaRRajendranSRaghuS. Li-ion conduction on nanofiller incorporated PVDF-Co-HFP based composite polymer blend electrolytes for flexible battery applications. Solid State Ionics2012; 218: 7–12.
4.
YuanFChenHZYangHYLiHYWangM. PAN-PEO solid polymer electrolytes with high conductivity. Mater Chem Phys2005; 89: 390–394.
5.
Soo-Jin ParkA-Reum HanJae-Sup ShinSeok Kim. Influence of crystallinity on ion conductivity of PEO-based solid electrolytes for lithium batteries. Macromol Res2010; 18: 336–340.
6.
ZhuPWuYReddyMYSreekumaran NairAChowdariBVRRamakrishnaS. Long term cycling studies of electrospun TiO2 nanostructures and their composites with MWCNTs for rechargeable Li ion batteries. RSC Adv2012; 2: 531–537.
7.
ReddyMVJoseRTengTHChowdariBVRRamakrishnaS. Preparation and electrochemical studies of electrospun TiO2 nanofibers and molten salt method nanoparticles. Electrochim Act2010; 55: 3109–3117.
8.
ReddyMVValerie TeohXWNguyenTBMichelle LimYYChowdariBVR. Effect of 0.5 M NaNO3: 0.5 M KNO3 and 0.88 M LiNO3: 0.12 M LiCl molten salts and heat treatment on electrochemical properties of TiO2. J Electrochem Soc2012; 159: A762–A769.
9.
PeiningZYongzhiWReddyMVSreekumaran NairAShengjiePSharmaAPetersonVKChowdariBVRRamakrishnaS. TiO2 nanoparticles synthesized by the molten salt method as a dual functional materials for dye-sensitized solar cells. RSC Adv2012; 2: 5123–5126.
10.
MasoudEMBellihiA-A-ElBayoumyWAMousaMA. Organic–inorganic composite polymer electrolyte based on PEO–LiClO4 and nano-Al2O3 filler for lithium polymer batteries: Dielectric and transport properties. J Alloys Comp2013; 575: 223–228.
11.
ZaffouriAMegdicheMGargouriM. AC conductivity and dielectric behavior in lithium and sodium diphosphate LiNa3P2O7. J Alloys Comp2014; 584: 152–158.
12.
RamyaCSSelvasekarapandianSHiran KumarGSavithaTAngeloPC. Investigation on dielectric relaxations of PVP–NH4SCN polymer electrolyte. J Non-Cryst Sol2008; 354: 1494–1502.
13.
ShanmukarajDWangGXLiuHKMuruganR. Synthesis and characterization of SrBi4Ti4O15 ferroelectric filler based composite polymer electrolytes for lithium ion batteries. Polym Bull2008; 60: 351–361.
14.
RajendranSRavi Shanker BabuRenuka DeviK. Ionic conduction behaviour in PVC-PEG blend polymer electrolytes upon the addition of TiO2. Ionics2009; 15: 61–66.
KumarRSubramaniaAKalyana SundaramNTVijaya KumarGBaskaranI. Effect of MgO nanoparticles on ionic conductivity and electrochemical properties of nanocomposite polymer electrolyte. J Mem Sci2007; 300: 104–110.
17.
DeyADasKKaranSDeSK. Vibrational spectroscopy and ionic conductivity of polyethylene oxide–NaClO4–CuO nanocomposite. Spectrochim Acta Part A: Mol Biomol Spect2011; 83: 384–391.
18.
LiaYHLiXPFuCHXuRZhouLTanCLHuSJLiWS. Polypropylene-supported and nano-Al2O3 doped poly(ethylene oxide)–poly(vinylidene fluoride-hexafluoropropylene)-based gel electrolyte for lithium ion batteries. J Power Sources2011; 196: 2115–2121.
19.
ShanmukarajDWangGXMuruganRLiuHK. Ionic conductivity and electrochemical stability of poly(methylmethacrylate)–poly(ethylene oxide) blend-ceramic fillers composites. J Phys Chem Sol2008; 69: 243–248.
20.
LinCWHungCLVenkateswaraluMHwangBJ. Influence of TiO2 nano-particles on the transport properties of composite polymer electrolyte for lithium-ion batteries. J Power Sources2005; 146: 397–401.
21.
SimLHGanSNChanCHYahyaR. ATR-FTIR studies on ion interaction of lithium perchlorate in polyacrylate/poly(ethylene oxide) blends. Spectrochim Acta Part A. Mol Biomol Spec2010; 76: 287–292.
22.
ZhaoLYuJ. Controlled synthesis of highly dispersed TiO2 nanoparticles using SBA-15 as hard template. J Coll Int Sci2006; 304: 84–91.
23.
Chen-YangYWWangYLChenYTLiYKChenHCChiuHY. Influence of silica aerogel on the properties of polyethylene oxide-based nanocomposite polymer electrolytes for lithium battery. J Power Sources2008; 182: 340–348.
24.
WieczorekWRaduchaDZalewskaAStevensJR. Effect of Salt Concentration on the Conductivity of PEO-Based Composite Polymeric Electrolytes. J Phys Chem B1998; 102: 8725–8731.
25.
AnimistaIEKruglyashovAL. Morphology and ionic conductivity of poly(ethylene oxide)–poly(vinyl acetate)–LiClO4 polymer electrolytes. Solid State Ionics1998; 106: 321–327.
