Non-destructive evaluation of composite repairs by using infrared thermography

Abstract

Composite structures are found in modern aircraft designs ranging from air transport to general aviation. Maintenance repair technology varies for each original equipment manufacturer and aircraft type. This research reports on two different composite repair methods commonly used within the composite aviation industry and how they compare when inspected with transient infrared thermography non-destructive evaluation technique. Composite sandwich test coupons made with carbon fiber laminate, nomex honeycomb, and glass fiber laminate were used for this work. Impact damages were generated in the sandwich test coupons and repairs were conducted by following repair procedures of two leading general aviation composite aircraft manufactures. During the repair process, controlled flaws were also induced to simulate bad repairs with weak bond areas, disbonds, and excessive porosity. During transient infrared thermography, several patches were identified that contained wrinkles, porosity, and disbond defects in the repaired panels. The indications were evaluated utilizing the time vs. temperature plot curves and profile data. The porosity indications displayed significant variations compared to the surrounding areas and were subsequently deemed defects as a result of the data.

Keywords

Composite sandwich structures composite repairs porosity delamination disbonds non-destructive evaluation infrared thermography

Get full access to this article

View all access options for this article.

References

Mitchell

. An assessment of general aviation advanced composite aircraft repair methodologies. Int J Appl Aviation Stud 2010; 10: 67–76.

Roach D and Duvall R. Detection of hail impact damage in composite structures at the failure energy threshold. In: Proceedings of 54th annual ATA NDT forum, Air Transport Association of America, Charlotte, NC, 2011.

Mitchell K, Poudel A, Li S, et al. Nondestructive evaluation of composite repairs. In: Proceedings of ASNT Annual Conference, ASNT, Las Vegas, NV, 2013.

Hsu DK, Barnard DJ and Peters JJ. Nondestructive evaluation of repairs on aircraft composite structures. Proc. SPIE: Nondestructive evaluation of materials and composites 2001; 4336: 100–107. DOI: 10.1117/12.435554.

Genest

Martinez

Mrad

. Pulsed thermography for non-destructive evaluation and damage growth monitoring of bonded repairs. Compos Struct 2009; 88: 112–120.

Soutis

Diamanti

Hodgkinson

. Non-destructive inspection of sandwich and repaired composite laminated structures. Compos Sci Technol 2005; 65: 2059–2067.

Cole

. Technical justification of repairs to composite laminates. Int J Adhes Adhes 1999; 19: 107–120.

Maldague

. Theory and practice of infrared technology for nondestructive testing, New York: Wiley, 2001.

Vavilov V, Kourtenkov D, Grinzato E, et al. Thermal characterization of defects in carbon fibre reinforced plastics: comparison of some inversion procedures. In: Nondestructive testing in civil engineering - 1995 international symposium, Vols 1 & 2, pp.551–558.

10.

Cramer KE and Winfree WP. Thermal characterization of defects in aircraft structures via spatially controlled heat application. In: Proc. international conference on thermal sensing and imaging diagnostic applications - thermosense XVIII, 1996, pp.202–209.

11.

Plotnikov YA and Winfree WP. Advanced image processing for defect visualization in infrared thermography. Proc. SPIE: Thermosense XX 1998; 4336: 331--338. DOI: 10.1117/12.304745.

12.

Maldague

Marinetti

. Pulse phase infrared thermography. J Appl Phys 1996; 79: 2694–2698.

13.

Shepard

Lhota

Rubadeux

. Reconstruction and enhancement of active thermographic image sequences. Optic Engg 2003; 42: 1337–1342.

14.

Zalameda JN, Rajic N and Winfree WP. 2003; Comparison of image processing algorithms for thermal nondestructive evaluation. In: Proc. conference on thermosense XXV, 2003, pp.374–385.

15.

Shepard

Hou

Lhota

. Automated processing of thermographic derivatives for quality assurance. Optic Engg 2007; 46: 051008–051008.

16.

Brady

Kulkarni

Chu

TCP

. Thermal image analysis for the in-situ NDE of composites. J Compos Technol Res 1999; 21: 141–146.

17.

Pan

Miller

Chu

. Thermal diffusivity mapping of carbon/carbon composites. Mater Eval 2009; 67: 540–546.

18.

Chu

Don

Pan

. Defect characterization in commercial carbon-carbon composites. World J Engg 2012; 9: 481–486.

19.

Marinetti S, Grinzato E, et al. Statistical Analysis of IR Thermographic Sequences by PCA. Infrared Physics & Technology 2004; 46: 85–91

20.

Shepard

Ducar

. Quantitative IR defect detection in composite aerospace structures. CINDE J 2004; 25: 6–11.

21.

Carslaw

Jaeger

. Conduction of heat in solids, Oxford: Claredon Press, 1986.

22.

Shepard SM. Temporal noise reduction, compression and analysis of thermographic image data sequences. Patent 6516084 B2, USA.