A comparative study: The combined effect of the cold working and age hardening processes on pitting behaviour of Al/SiC metal matrix composites under saline environment

Abstract

The combined effect of cold working and age hardening treatment (T8) on the corrosion behaviour of Al-Si-Mg based metal matrix composite reinforced with silicon carbide particles has been investigated in 3.5 wt% NaCl solution by potentiodynamic polarization technique. Composites containing 10 and 20 vol% silicon carbide particles were produced by compocasting technique and cold–worked at ratios of 4, 6, 10, 25 and 50% prior to ageing heat treatment conducted at 175℃. Corroded surfaces of the composites were observed by using scanning electron microscopy. A significant change in the corrosion behaviour of composites was observed when cold work ratio was increased from 4 to 50%. In addition, it has been found that the influence of cold working on corrosion behaviour is relatively higher compared to the effect of reinforcement content and age-hardening treatment.

Keywords

Metal-matrix composite corrosion plastic deformation casting

Get full access to this article

View all access options for this article.

References

Ferry

Munroe

. Recrystallization kinetics and final grain size in a cold rolled particulate reinforced Al-based MMC. Compos Part A-Apply S 2004; 35: 1017–1025.

Talbot

. Corrosion science and technology, Boca Raton, Florida: CRC Press, 2000, pp. 5–9.

Trowsdale

Noble

Haris

. The influence of silicon carbide reinforcement on the pitting behaviour of aluminium. Corros Sci 1996; 38: 177–191.

Trzaskoma

. Pit morphology of aluminum alloy and silicon carbide/aluminum alloy metal matrix composites. Corrosion 1990; 46: 402–409.

Trzaskoma

McCafferty

Crowe

. Corrosion behavior of SiC/Al metal matrix composites. J Electrochem Soc 1983; 130: 1804–1809.

Quainoo

Yannacopoulos

. The effect of cold work on the precipitation kinetics of Al6111 aluminum. J Mater Sci 2004; 39: 6495–6502.

Liu

. A study on flow stress of Al-SiC composites deformed in a large range of strain. Scripta Mater 1996; 35: 253–259.

Tekmen

Cocen

. Role of cold work and SiC volume fraction on accelerated age hardening behavior of Al Si Mg/SiC composites. J Mater Sci Lett 2003; 22: 1247–1249.

Dikici

Gavgali

Tekmen

. Corrosion behavior of an artificially aged (T6) Al–Si–Mg-based metal matrix composite. J Compos Mater 2006; 40: 1259–1269.

10.

De Salazar

JMG

Urena

Manzanedo

. Corrosion behaviour of AA6061 and AA7005 reinforced with Al₂O₃ particles in aerated 3.5% chloride solutions: potentiodynamic measurements and microstructure evaluation. Corros Sci 1999; 41: 529–545.

11.

Lucas

Clarke

. Corrosion of aluminium-based metal matrix composites, England: Research Studies Pres Ltd, 1993, pp. 1–137.

12.

McIntyre JF, Le AH, Colledge SL, et al. Corrosion behavior of SiC-reinforced aluminum alloys. Report no: NSWC-TR-87-326, 25 September 1987. Washington DC: US Naval Surface Warfare Center.

13.

Yaghmaee MS and Kaptay G. On the stability range of SiC in ternary liquid Al-Si-Mg alloy. Mater World. In: Proceeding of Hungarian materials science society, e-journal. Available at: http://wwwold.kfki.hu/anyagokvilaga/tartalom/2001/jul/kaptay_yaghmaee.htm (2001, accessed 5 February 2015).

14.

Lloyd

. The solidification microstructure of particulate reinforced aluminium/SiC composites. Compos Sci Technol 1988; 35: 159–116.

15.

Tekmen

Cocen

. The Effect of Si and Mg on Age Hardening Behavior of Al-SiCp Composites. J Compos Mater 2003; 37: 1791–1800.

16.

Galvele

. Tafel’s law in pitting corrosion and crevice corrosion susceptibility. Corros Sci 2005; 47: 3053–3067.

17.

Gavgali

Dikici

Tekmen

. The effect of SiCp reinforcement on the corrosion behaviour of Al based metal matrix composites. Corros Rev 2006; 24: 27–37.

18.

Monticelli

Zucchi

Brunoro

. Stress corrosion cracking behaviour of some aluminium-based metal matrix composites. Corros Sci 1997; 39: 1949–1963.

19.

Turnbull

. Review of corrosion studies on aluminium metal matrix composites. Br Corros J 1992; 27: 27–35.

20.

ASM Handbook. ASM International 1990; Vol 2, Ohio/USA.

21.

Oldfield

Electrochemical theory of galvanic corrosion. In: Hack

(ed). Galvanic corrosion. Philadelphia, PA: American Society for Testing and Materials (ASTM), 1988, pp. 5–22.

22.

Ahmed

Abdul Aleem

. Degradation of aluminum metal matrix composites in salt water and its control. Mater Des 2002; 23: 173–180.

23.

Zhen

Yin

. Microstructure and properties of (SiC, TiB₂)/B₄C composites by reaction hot pressing. Ceram Int 2006; 32: 849–856.

24.

Dikici

Bedir

Gavgali

. Corrosion characteristics of Al-Cu/B4C (T6) MMCs and their microstructure evaluation. Kovove Mater 2009; 47: 317–323.

25.

Nilsen

Bardal

. Short duration tests and a new criterion for characterization of pitting resistance of Al alloys. Corros Sci 1977; 17: 635–646.

26.

Nisancioglu

Holtan

. Measurement of the critical pitting potential of aluminium. Corros Sci 1998; 18: 835–849.