The formation mechanism and interface structure characterization of in situ AlN/Al composites

Abstract

The fabrication of AlN/Al composites through nitrogen-bearing gas (NH₃) bubbling method into Al melts or Al–Mg melts was once experimentally and analytically studied. The experimental results show that Mg addition greatly enhanced the nitridation rate and volume fraction of AlN. However, a detailed characterization of these changes is still incomplete. This paper presents results of an extensive experimental study and theoretical analysis carried out to investigate the profound effect of the formation of AlN with Mg addition. X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy were used to characterize the microstructure. The edge-to-edge matching crystallographic model which applied to the three common crystal structures (body-centered cubic, face-centered cubic, and hexagonal close packed) was used to analyze and investigate this notable phenomenon. The calculation and analysis of theoretical model manifested that AlN is formed by the direct interfacing of pure Al or Al–Mg and NH₃ with active nitrogen, instead of forming into the precursor Mg₃N₂ first and then the precursor transformed to AlN.

Keywords

AlN/Al composites formation mechanism characterization microstructure

Get full access to this article

View all access options for this article.

References

Cui

. Fracture toughness of in situ TiCp–AlNp/Al composite. J Mater Process Technol 2000; 100: 36–41.

Daniel

BSS

Murthy

VSR

Murty

. Metal-ceramic composites via in-situ methods. J Mater Process Technol 1997; 68: 132–155.

Koczak MJ and Kumar KS. In situ process for producing a composite containing refractory material. Patent 4808372 A. USA, 1989.

Tjong

. Creep behavior of in-situ Al2O3 and TiB2 particulates mixture-reinforced aluminum composites. Mater Sci Eng A 2000; 29: 49–113.

Lai

. In situ TiB2 reinforced Al alloy composites. Scripta Mater 2001; 45: 1017–1023.

Amini Mashhadia

Wada

Tomoshige

. Fabrication of bulk AlN–TiN nanocomposite by reactive ball milling and underwater shock consolidation technique. Ceram Int 2011; 37: 1747–1754.

Dikici

Gavgali

Bedir

. Synthesis of in situ TiC nanoparticles in liquid aluminum: the effect of sintering temperature. J Compos Mater 2011; 45: 895–900.

Sahoo

Koczak

. Microstructure-property relationships of in situ reacted TiC/Al-Cu metal matrix composites. Mater Sci Eng A 1991; 131: 69–76.

Sahoo

Koczak

. Analysis of in situ formation of titanium carbide in aluminum alloys. Mater Sci Eng A 1991; 144: 37–44.

10.

Premkumar

Chu

. Al-TiC particulate composite produced by a liquid state in situ process. Mater Sci Eng A 1995; 202: 172–178.

11.

Hou

Mutharasan

Koczak

. Feasibility of aluminium nitride formation in aluminum alloys. Mater Sci Eng A 1995; 195: 121–129.

12.

Shyu

Weng

. In situ reacted titanium nitride-reinforced aluminum alloy composite. J Mater Process Technol 2002; 122: 301–304.

13.

Khatri

Koczak

. Formation of TiC in in situ processed composites via solid-gas, solid-liquid and liquid-gas reaction in molten Al-Ti. Mater Sci Eng A 1993; 162: 153–162.

14.

Wang

. Investigation on fracture toughness of aluminum matrix composites reinforced with in situ titanium diboride particles. J Compos Mater 2012; 46: 2145–2150.

15.

Seon Shin K, Kim Y-S and Kim NJ. CAAM Report 98001 F, April 1998.

16.

Werdecker W and Aldinger F. Cast ingot of aluminum alloy available for rolling operation and method for manufacturing the same. Patent 4377425, USA, 1983.

17.

Aghajanian

Biel

Smith

. AlN matrix composites fabricated via an infiltration and reaction approach. J Am Ceram Soc 1994; 77: 1917–1920.

18.

Jean

Haussonne

. Review of the synthesis methods for AlN. Mater Manuf Proc 1995; 10: 717–755.

19.

Zheng

Reddy

. In-situ processing of Al alloy composites. Adv Mater Eng 2003; 5: 167–172.

20.

Zheng Q, Wu B and Reddy RG. In-situ formation of AlN-Al composites. In: State of Art in Cast Metal Matrix Composites in the Next Millennium – 2000 TMS Fall Meeting (ed PK Rohatgi), 2000, TMS, Warrendale, USA, pp. 1–12.

21.

Zheng Q and Reddy RG. In-situ processing of Al-alloy matrix composites. In: Affordable Metal-Matrix Composites for High Performance Applications (ed AB Pandey, KL Kendig and TJ Watson), TMS, Warrendale, PA, 2001, pp. 199–210.

22.

Zheng Q and Reddy RG. In-situ processing of Al alloy matrix composites using gas-bubbling method. In: Proceeding of the 2002 NSF Design, Service and Manufacturing Grantees and Research Conference, Iowa State University, Ames, Iowa, USA, 2002, pp. 2144–2146.

23.

Zheng Q and Reddy RG. Manufacturing of Al composites reinforced with SiC and Al. In: 2003 NSF Design, Service, and Manufacturing Grantees and Research Conference (ed RG Reddy), The University of Alabama, Tuscaloosa, AL, USA, 2003, pp. 2262–2266.

24.

Zhang

Kelly

. Edge-to-edge matching and its applications. Part I. Application to the simple HCP/BCC system. Acta Mater 2005; 53: 1073–1084.

25.

Zhang

Kelly

. Morphology and crystallography of Mg₂₄Y₅ precipitate in Mg–Y alloy. Scripta Mater 2003; 48: 379–379.

26.

Cheng

Han

. Physical chemistry, Shanghai: Shanghai Science and Technology Press, 1980, pp. 278–281.

27.

Lide

. CRC handbook of chemistry and physics, 76th ed. New York: CRC Press, 1995, pp. 5–68.