Out-of-autoclave prepreg consolidation: Coupled air evacuation and prepreg impregnation modeling

Abstract

Out-of-autoclave prepregs produce low-porosity parts through a complex consolidation process that includes air evacuation through a partially impregnated microstructure and subsequent resin infiltration flow. In this article, we propose, develop, and validate the first model describing this consolidation process by computing the thickness change of the material during processing. The air evacuation period is first simulated as a function of fiber packing and pressure conditions. Then, the cure period is described by modeling flow and compaction phenomena. Model predictions are compared to several experimental case studies, which show that the effect of most material properties and process parameters is well captured, and used in parametric studies to identify key trends.

Keywords

Prepreg computational modeling consolidation

Get full access to this article

View all access options for this article.

References

Centea

Hubert

. Measuring the impregnation of an out-of-autoclave prepreg by micro-CT. Compos Sci Technol 2011; 71: 593–599.

Centea T and Hubert P. The effect of material and process parameters on tow impregnation and micro-void formation in out-of-autoclave prepregs. In: Proceedings of the ASC-26 conference, Montreal, Canada, 26–28 September 2011, pp.1279–1298.

Farhang L and Fernlund G. Void evolution and gas transport during cure in out-of-autoclave prepreg laminates. In: Proceedings of the Society for the Advancement of Material Process Engineering Conference, Long Beach, USA, 23–26 May 2011, pp.1153: 1–12.

Louis BM. Gas transport in out-of-autoclave prepreg laminates. Master Thesis, University of British Columbia, Vancouver, 2007.

Grunenfelder L and Nutt S. Out-time effects on VBO prepreg and laminate properties. In: Proceedings of the Society for the Advancement of Material Process Engineering Conference, Long Beach, USA, 23–26 May 2011, pp.1–8.

Gangloff JJ, Sinha S and Advani SG. A model for tow impregnation and consolidation for partially impregnated thermoset prepregs. In: Proceedings of the Society for the Advancement of Material Process Engineering Conference, Long Beach, USA, 23–26 May 2011, pp.1–10.

Grunenfelder LK, Centea T, Hubert P, et al. Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg. Compos Part A: Appl Sci Manufac 2013; 45: 119–126.

Grunenfelder

Nutt

. Void formation in composite prepregs—effect of dissolved moisture. Compos Sci Technol 2010; 70: 2304–2309.

Darcy

. Les Fontaines Publiques de la Ville de Dijon, Paris: Dalmont, 1856.

10.

Gutowski

Morigaki

Cai

. The consolidation of laminate composites. J Compos Mater 1987; 21: 172–188.

11.

Gebart

. Permeability of unidirectional reinforcements for RTM. J Compos Mater 1992; 26: 1100–1133.

12.

Pascal

Poursartip

. A review of flow and compaction modelling relevant to thermoset matrix laminate processing. J Reinfor Plast Compos 1998; 17: 286–318.

13.

Hubert P. Aspects of flow and compaction of laminated composite shapes during cure. PhD thesis, University of British Columbia, Vancouver, 1996.

14.

Dave

Kardos

Duduković

. A model for resin flow during composite processing: part 1—general mathematical development. Polym Compos 1987; 8: 29–38.

15.

Michaud

Manson

J-AE

. Impregnation of compressible fiber mats with a thermoplastic resin. Part I: theory. J Compos Mater 2001; 35: 1150–1173.

16.

Centea

Hubert

. Out-of-autoclave prepreg consolidation under deficient pressure conditions. J Compos Mater 2014; 48(16): 2033–2045.

17.

Cender T. Experimental characterization of a partially pre-impregnated fabric for OOA processing. In: Proceedings of the Society for the Advancement of Material Process Engineering Conference, Long Beach, USA, 23–26 May 2011, pp.1–12.

18.

Wysocki M, Larsson R and Toll S. Modelling the consolidation of partially impregnated prepregs. In: Proceedings of ICCM-17 Conference, Edinburgh, UK, 27–31 July 2009, pp.1–10.

19.

Wysocki

Asp

Toll

. Two-phase continuum modelling of composites consolidation. Plast Rubber Compos 2009; 38: 93–97.

20.

Larsson

Wysocki

Toll

. Process-modeling of composites using two-phase porous media theory. Eur J Mech—A/Solids 2004; 23: 15–36.

21.

Arafath ARA, Fernlund G and Poursartip A. Gas transport in prepregs: model and permeability experiments. In: Proceedings of ICCM-17 Conference, Edinburgh, UK, 27 July–31 July 2009, pp.1–10.

22.

Kratz J and Hubert P. Out-of-autoclave manufacturing of composite aircraft sandwich structures. In: Proceedings of ICCM-17 Conference, Edinburgh, UK, 27–31 July 2009, pp.1–10.