In the present study, six different combinations of pultruded hybrid kenaf/glass composites were fabricated. The number of kenaf and glass rovings was specifically selected to ensure constant local fiber volume fractions in the composites. The volumetric composition of the composites was determined by using a gravimetrically based method. Optical microscopy was used to determine the location of voids. The short-beam test method was used to determine the interlaminar shear strength of the composites, and the failure mode was observed. It was found that the void volume fraction of the composites was increased as a function of the kenaf fiber volume fraction. A linear relationship with high correlation (R2 = 0.95) was established between the two volume fractions. Three types of voids were observed in the core region of the composites (lumen voids, interface voids and impregnation voids). The failure of the samples started with horizontal shear cracks that propagated into the core region, and ultimately the samples failed by a vertical crack. The interlaminar shear strength was found to decrease as a function of the hybrid fiber mixing ratio.
SreekalaMSGeorgeJKumaranMG. The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres. Comp Sci Technol2002; 62: 339–353.
AtiqahAMalequeMAJawaidM. Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Compos B Eng2014; 56: 68–73.
4.
KarusMKaupMOrtmannS. Use of natural fibres in composites in the German and Austrian automotive industry—market survey 2002. J Industr Hemp2003; 8: 73–78.
5.
ParikhDVCalamariTASawhneyAPS. Thermoformable automotive composites containing kenaf and other cellulosic fibers. Text Res J2002; 72: 668–672.
KleinK. Manual of textile technology, short-staple spinning Series I, Vol. 1, the technology of short-staple spinning, Oxford, UK: Alden Press, 1998, pp. 25–29.
8.
MadsenBHoffmeyerPLilholtH. Hemp yarn reinforced composites – II. Tensile properties. Compos A Appl Sci Manuf2007; 38: 2204–2215.
9.
AkilHMChengLWMohd IshakZA. Water absorption study on pultruded jute fibre reinforced unsaturated polyester composites. Comp Sci Technol2009; 69: 1942–1948.
10.
AkilHMDe RosaIMSantulliC. Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission. Mater Sci Eng A2010; 527: 2942–2950.
11.
NosbiNAkilHMMohd IshakZA. Degradation of compressive properties of pultruded kenaf fiber reinforced composites after immersion in various solutions. Mater Des2010; 31: 4960–4964.
PengXFanMHartleyJ. Properties of natural fiber composites made by pultrusion process. J Compos Mater2012; 46: 237–246.
14.
MemonANakaiA. The processing design of jute spun yarn/PLA braided composite by pultrusion molding. Adv Mech Eng2013; 2013: 8–8.
15.
MemonANakaiA. Mechanical properties of jute spun yarn/PLA tubular braided composite by pultrusion molding. Energy Procedia2013; 34: 818–829.
16.
AkilHMSantulliCSarasiniF. Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites. Comp Sci Technol2014; 94: 62–70.
17.
ZamriMHMd AkilHMohd IshakZA. Effect of different fiber loadings and sizes on pultruded kenaf fiber reinforced unsaturated polyester composites. Polym Compos 2014. n/a–n/a.
18.
OmarMFMd AkilHAhmadZA. Dynamic properties of pultruded natural fibre reinforced composites using split Hopkinson Pressure Bar technique. Mater Des2010; 31: 4209–4218.
19.
TsangFJinYYuKN. Effect of γ-irradiation on the short beam shear behavior of pultruded sisal-fiber/glass-fiber/polyester hybrid composites. J Mater Sci Lett2000; 19: 1155–1157.
20.
LackeyEVaughanJInamdarK. Statistical characterization of pultruded composites with natural fiber reinforcements. J Natural Fiber2007; 4: 73–73.
21.
ZamriMHAkilHMBakarAA. Effect of water absorption on pultruded jute/glass fiber-reinforced unsaturated polyester hybrid composites. J Compos Mater2012; 46: 51–61.
Beauson J, Markussen CM and Madsen B. Analysis of composition and microstructural uniformity of hybrid glass/carbon fibre composites. In: 34th Risø international symposium on materials science, 2013, pp.177–191.
24.
Durai Prabhakaran RT, Toftegaard H, Markussen C, et al. Experimental and theoretical assessment of flexural properties of hybrid natural fibre composites. Acta Mech 2014; 225: 2775–2782.
25.
SoutisC. Compression testing of pultruded carbon fibre-epoxy cylindrical rods. J Mater Sci2000; 35: 3441–3446.
26.
ShaJDaiJLiJ. Measurement and analysis of fiber-matrix interface strength of carbon fiber-reinforced phenolic resin matrix composites. J Compos Mater2014; 48: 1303–1311.
27.
BarberoEJ. Introduction to composite materials design, USA: CRC Press, 2011.
28.
JoshiOK. The effect of moisture on the shear properties of carbon fibre composites. Composites1983; 14: 196–200.
29.
BaleyCDaviesPGrohensY. Application of interlaminar tests to marine composites. A literature review. Appl Compos Mater2004; 11: 99–126.
30.
MehmoodSMadsenB. Properties and performance of flax yarn/thermoplastic polyester composites. J Reinf Plast Compos2012.
31.
DhakalHNZhangZYRichardsonMOW. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Comp Sci Technol2007; 67: 1674–1683.
32.
Madsen B. Process conditions and volumetric composition in composites. In: 34th Risø International Symposium on Materials Science, 2013, pp.37–54.
33.
GoutianosSPeijsTNystromB. Development of flax fibre based textile reinforcements for composite applications. Appl Compos Mater2006; 13: 199–215.
34.
MaHLiYWangD. Investigations of fiber twist on the mechanical properties of sisal fiber yarns and their composites. J Reinf Plast Compos2014.
35.
CasalEGrandaMBonhommeJ. Influence of porosity on the apparent interlaminar shear strength of pitch-based unidirectional C–C composites. Carbon2001; 39: 73–82.
36.
BlancoCCasalEGrandaM. Influence of fibre–matrix interface on the fracture behaviour of carbon-carbon composites. J Eur Ceramic Soc2003; 23: 2857–2866.
37.
SelmyAIElsesiARAzabNA. Interlaminar shear behavior of unidirectional glass fiber (U)/random glass fiber (R)/epoxy hybrid and non-hybrid composite laminates. Compos B Eng2012; 43: 1714–1719.
38.
HeYMakeevA. Nonlinear shear behavior and interlaminar shear strength of unidirectional polymer matrix composites: a numerical study. Int J Solid Struct2014; 51: 1263–1273.
39.
FanZSantareMHAdvaniSG. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes. Compos A Appl Sci Manuf2008; 39: 540–554.
40.
AlmeidaJHSJrAmicoSCBotelhoEC. Hybridization effect on the mechanical properties of curaua/glass fiber composites. Compos B Eng2013; 55: 492–497.
