This study investigates the effect of nanocarboxylic acrylonitrile butadiene rubber on the tensile fatigue behaviour of carbon fibre-reinforced polymer composites with dicyandiamide-cured epoxy matrix. The stress-controlled tension–tension fatigue behaviour at a stress ratio of R = 0.1 and maximum stresses between 400 MPa and 650 MPa was investigated for the case of carbon fibre-reinforced polymers with pristine and nanorubber-modified epoxy matrices with loadings of 5 phr, 10 phr, 15 phr and 20 phr. The results from the experimental tests show that the high-cycle fatigue life of the laminates with 15 phr of nanorubber-modified resin matrix was increased by a factor of two compared to the pristine matrix samples. Scanning electron microscopy images of the fracture surfaces also show an enhanced plastic deformation existing at the fibre–matrix interface and a lower extent of fibre pull-out; both contributing towards the enhancement of the fatigue performance of the carbon fibre-reinforced polymer composites.
ManjunathaCTaylorAKinlochA. The effect of rubber micro-particles and silica nano-particles on the tensile fatigue behaviour of a glass-fibre epoxy composite. J Mater Sci2009; 44: 342–345.
2.
PhongNTGabrMHOkuboK. Improvement in the mechanical performances of carbon fiber/epoxy composite with addition of nano-(polyvinyl alcohol) fibers. Compos Struct2013; 99: 380–387.
3.
ZhouYPervinFJeelaniS. Improvement in mechanical properties of carbon fabric-epoxy composite using carbon nanofibers. J Mater Process Technol2008; 198: 445–453.
4.
QiGZhangXLiB. The study of rubber-modified plastics with higher heat resistance and higher toughness and its application. Polym Chem2011; 2: 1271–1274.
5.
KinlochALeeSTaylorA. Improving the fracture toughness and the cyclic-fatigue resistance of epoxy-polymer blends. Polymer2014; 55: 1–10.
6.
ZhaoYChenZ-KLiuY. Simultaneously enhanced cryogenic tensile strength and fracture toughness of epoxy resins by carboxylic nitrile-butadiene nano-rubber. Compos A: Appl Sci Manuf2013; 55: 178–187.
7.
ManjunathaCMTaylorAC. The cyclic-fatigue behaviour of an epoxy polymer modified with micron-rubber and nano-silica particles. J Mater Sci2009; 44: 4487–4490.
8.
ShenM-Y. Mechanical properties and tensile fatigue of graphene nanoplatelets reinforced polymer nanocomposites. J Nanomater2013; 2013: 1–9.
9.
MoaseriE. Improvements in fatigue life of amine-functionalized multi-walled carbon nanotube-reinforced epoxy composites: effect of functionalization degree and microwave-assisted precuring. J Compos Mater2014; 49: 1961–1969.
FerreiraJ. Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin. J Compos Mater2015; 47: 1885–1895.
12.
Ozdemir N, Zhang T and Hadavinia H. The effect of nano rubber on the mechanical properties of CFRP. In: 23rd annual international conference on composites/nano engineering (ICCE-23), Chengdu, China, July 2015.
13.
Ozdemir NG, Zhang T, Hadavinia H, et al. Rheological properties, cure characteristics, and morphology of acrylonitrile-based nanorubber modified epoxy. J Appl Polym Sci 2015; 132(18): 1–13.
LeeLJFuKEYangJN. Prediction of fatigue damage and life for composite laminates under service loading spectra. Compos Sci Technol1996; 56: 635–648.
16.
ChenLJinHXuZ. Role of a gradient interface layer in interfacial enhancement of carbon fiber/epoxy hierarchical composites. J Mater Sci2015; 50: 112–121.
17.
JalalvandM. Damage analysis of pseudo-ductile thin-ply UD hybrid composites – a new analytical method. Compos A: Appl Sci Manuf2015; 69: 83–93.
18.
VassilopoulosAKellerT. Fatigue of fiber-reinforced composites, Lausanne: Springer, 2011.
19.
ShaoYYashiroTOkuboK. Effect of cellulose nano fiber (CNF) on fatigue performance of carbon fiber fabric composites. Compos A: Appl Sci Manuf2015; 76: 244–254.
HigashinoMTakemuraK-iFujiiTJ. Strength and damage accumulation of carbon fabric composites with a cross-linked NBR modified epoxy under static and cyclic loadings. Compos Struct1995; 32: 357–366.
22.
BoukharoubaWBezaziAScarpaF. Identification and prediction of cyclic fatigue behaviour in sandwich panels. Measurement2014; 53: 161–170.
23.
ManjunathaCBojjaRJagannathanN. Fatigue behavior of a nanocomposite under a fighter aircraft spectrum load sequence. J Nano Res2013; 24: 58–66.
24.
ZhuJImamACraneR. Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength. Compos Sci Technol2007; 67: 1509–1517.
25.
VermaV. Estimation of fatigue life of epoxy-alumina polymer nanocomposites. Proc Mater Sci2014; 5: 669–678.
26.
TiwariS. Strengthening of a fibre–matrix interface: a novel method using nanoparticles. Nanomater Nanotechnol2013; 3.
27.
SprengerS. Improving mechanical properties of fiber-reinforced composites based on epoxy resins containing industrial surface-modified silica nanoparticles: review and outlook. J Compos Mater2015; 49: 53–63.
28.
ManjunathaCM. The tensile fatigue behavior of a glass-fiber reinforced plastic composite using a hybrid-toughened epoxy matrix. J Compos Mater2010; 44: 2095–2109.
29.
GenedyM. Improving fatigue performance of GFRP composite using carbon nanotubes. Fibers2015; 3: 13–29.
30.
LiuLLiLGaoY. Single carbon fiber fracture embedded in an epoxy matrix modified by nanoparticles. Compos Sci Technol2013; 77: 101–109.
31.
YinSY. Controlling and mapping interfacial stress transfer in fragmented hybrid carbon fibre–carbon nanotube composites. Compos Sci Technol2014; 100: 121–127.
