A three-dimensional finite element model of the induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites is developed. The model takes into account a stainless steel mesh heating element located at the interface of the two composite adherends to be welded. This heating element serves to localize the heating where it is needed most, i.e. at the weld interface. The magnetic, electrical, and thermal properties of the carbon fiber/polyphenylene sulfide composite and other materials are identified experimentally or estimated and implemented in the model. The model predicts the temperature–time curves during the heating of the composite and is used to define processing parameters leading to high-quality welded joints. The effect of the heating element size and input current on the thermal behavior is investigated, both experimentally and using the developed model. The welds quality is assessed through microscopic observations of the weld interfaces, mechanical testing, and observations of the fracture surfaces. A comparison with two other welding processes, namely resistance welding and ultrasonic welding is finally conducted.
Van IngenJBuitenhuisAVan WijngaardenM. Development of the Gulfstream G650 induction welded thermoplastic elevators and rudder. In: SAMPE 2010 conference and exhibition “new materials and processes for a new economy,”, Seattle, WA, USA: Society for the Advancement of Material and Process Engineering, 18 May 2010. .
2.
VillegasIFMoserLYousefpourA. Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites. J Thermoplast Compos Mater2012; 26: 1007–1024.
3.
DubéMHubertPGalletJNAH. Metal mesh heating element size effect in resistance welding of thermoplastic composites. J Compos Mater2012; 46: 911–919.
4.
VillegasIF. In situ monitoring of ultrasonic welding of thermoplastic composites through power and displacement data. J Thermoplast Compos Mater2013; 28: 66–85. .
5.
Worrall C, Wise R and Kapadia A. Novel induction heating technique for joining of carbon fibre composites. In: 16th European conference on composite materials, Sevilla, Spain, 22–26 June 2014.
6.
BayerlTDuhovicMMitschangP. The heating of polymer composites by electromagnetic induction – a review. Compos Part A: Appl Sci Manuf2014; 57: 27–40.
7.
AhmedTJStavrovDBerseeHEN. Induction welding of thermoplastic composites—an overview. Compos Part A: Appl Sci Manuf2006; 37: 1638–1651.
8.
DubeMHubertPYousefpourA. Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints. Int J Fatigue2009; 31: 719–725.
9.
MillerAKChangCPayneA. Nature of induction heating in graphite-fiber, polymer-matrix composite materials. SAMPE J1990; 26: 37–54. .
10.
LinWBunemanO. Induction heating model for graphite fiber/thermoplastic matrix composites. SAMPE J1991; 27: 45–51.
Moser L. Experimental analysis and modeling of susceptorless induction welding of high performance thermoplastic polymer composites. PhD Thesis, Institute für Verbundwerkstoffe GmbH, Kaiserslautern, Germany, 2012.
13.
Duhovic M, Hümbert M, Mitschang P, et al. Further advances in simulating the processing of composite materials by electromagnetic induction. In: LS-DYNA (ed.) 13th international LS-DYNA user conference, Dearborn, Michigan, USA, 11 June 2014.
14.
Duhovic M, L'Eplattenier P, Caldichoury I, et al. Advanced 3d finite element simulation of thermoplastic carbon fiber composite induction welding. In: ECCM 16 – European conference on composite materials, Seville, Spain, 22–26 June 2014.
15.
Duhovic M, Mitschang P and Maier M. Advance in simulating the processing of composite materials by electromagnetic induction. In: LS-DYNA (ed) 9th European LS-DYNA users' conference, Manchester, UK, 2–4 June 2013.
16.
Duhovic M, Moser L, Mitschang P, et al. Simulating the joining of composite materials by electromagnetic induction. In: 12th international LS-DYNA user conference (ed LS-DYNA), Dearborn, Michigan, USA, 3–5 June 2012.
17.
BensaidSTrichetDFouladgarJ. 3-D simulation of induction heating of anisotropic composite materials. IEEE Trans Magn2005; 41: 1568–1571.
18.
BensaidSTrichetDFouladgarJ. Electromagnetic and thermal behaviors of multilayer anisotropic composite materials. IEEE Trans Magn2006; 42: 995–998.
19.
Wasselynck G, Trichet D and Fouladgar J. Determination of the electrical conductivity tensor of a CFRP composite using a 3-d percolation model. IEEE Transactions on Magnetics 2013; 49: 1825–1828.
20.
FinkBMcCulloughRLGillespieJWJ. Induction heating of carbon-fiber composites: thermal generation model, Aberdeen, Maryland: Army Research Laboratory, 2000. .
21.
FinkBMcCulloughRLGillespieJWJr. A local theory of heating in cross-ply carbon fiber thermoplastic composites by magnetic induction. Polym Eng Sci1992; 32: 357–369.
22.
YarlagaddaSKimHJGillespieJWJr. A study on the induction heating of conductive fiber reinforced composites. J Compos Mater2002; 36: 401–421.
23.
KimHJYarlagaddaSShevchenkoNB. Development of a numerical model to predict in-plane heat generation patterns during induction processing of carbon fiber-reinforced prepreg stacks. J Compos Mater2003; 37: 1461–1483.
24.
RudolfRMitschangPNeitzelM. Induction heating of continuous carbon-fibre-reinforced thermoplastics. Compos Part A: Appl Sci Manuf2000; 31: 1191–1202.
25.
Ruffini RS, Ruffini RT, Nemkov VS, et al. Enhancing induction heating processes by applying magnetic flux controllers. In: Heat treating: proceedings of the 19th conference, Cincinnati, OH, USA, 1–4 November 1999, pp.162–167. Materials Park, OH: ASM International.
26.
AgeorgesCYeLHouM. Experimental investigation of the resistance welding of thermoplastic-matrix composites. Part II: optimum processing window and mechanical performance. Compos Sci Technol2000; 60: 1191–1202.
27.
TalbotEHubertPDubeM. Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling. J Thermoplast Compos Mater2013; 26: 699–717.
28.
RudnevVILovelessDCookR. Handbook of induction heating, New York: Taylor & Francis, 2002. .
29.
HolmesSTGillespieJWJr. Thermal analysis for resistance welding of large-scale thermoplastic composite joints. J Reinf Plast Compos1993; 12: 723–736. .
30.
JunXWirtzRA. In-plane effective thermal conductivity of plain-weave screen laminates. IEEE Trans Compon Pack Technol2002; 25: 615–620.
31.
Ahmed TJ, Stavrov D and Bersee HEN. An experimental investigation into resistance and induction welding for aerospace structures: a comparison. In: 47th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, Newport, RI, USA, 1–4 May 2006, pp.7765–7774. Reston, VA: American Institute of Aeronautics and Astronautics Inc.
32.
Ho CY and Chu TK. In: CINDAS (ed.) Electrical resistivity and thermal conductivity of nine selected aisi stainless steels, 1977.
33.
Ten Cate Advanced Composite USA Inc. TenCate Cetex® TC1100 PPS Resin System, 2013.
34.
GraphiteStore. GCGW-5110, 2014.
35.
Lin W. Induction heating model for high-frequency induction joining and repair of complex-shape graphite fiber/polymer matrix composites. Stanford: Stanford University, 1993, p. 244.
36.
Fluxtrol. Ferrotron 559H: Soft magnetic composite for induction heating, 2014.
