Fractography analysis of 1.0 wt% nanoclay/multi-layer graphene reinforced epoxy nanocomposites

Abstract

The topographical features of fractured tensile, flexural, K_1C, and impact specimens of 1.0 wt% multi-layered graphene/nanoclay-epoxy nanocomposites have been investigated. The topographical features studied include maximum roughness height (R_max or R_z), root mean square value (R_q), roughness average (R_a), and waviness (W_a). Due to deflection and bifurcation of the cracks by nanofillers, specific fracture patterns are observed. Although these fracture patterns seem aesthetically appealing, however, if delved deeper, they can further be used to estimate the influence of nanofiller on the mechanical properties. By a meticulous examination of topographical features of fractured patterns, various important aspects related to fillers can be approximated such as dispersion state, interfacial interactions, presence of agglomerates, and overall influence of the incorporation of filler on the mechanical properties of nanocomposites. In addition, treating the nanocomposites with surfaces of specific topography can help improve the mechanical properties of nanocomposites.

Keywords

Fractography multi-layered graphene (MLG)nanoclay epoxy nanocomposites

Get full access to this article

View all access options for this article.

References

Carlson RL, Kardomateas GA and Craig JI. Mechanics of failure mechanisms in structures. 1st ed. Springer, New York, USA, 2012.

Atif

Inam

. Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein J Nanotechnol 2016; 7: 1174–1196.

Atif

Shyha

Inam

. The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Adv 2016; 6: 34188–34197.

Miracle DB, Donaldson SL (eds) ASM handbook vol. 21, Composites, ASM Publishers, USA. 2001.

Atif

Inam

. Modeling and simulation of graphene based polymer nanocomposites: advances in the last decade. Graphene 2016; 5: 96–142.

Atif

Shyha

Inam

. Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. J Compos Mater 2016; 0(0): 1–12.

Atif

Wei

Shyha

et al.

Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Adv 2016; 6: 1351–1359.

Yao

Zhou

Yeh

. Macro/microscopic fracture characterizations of SiO2/epoxy nanocomposites. Aerosp Sci Technol 2008; 12: 223–230.

Wetzel

Rosso

Haupert

et al.

Epoxy nanocomposites—fracture and toughening mechanisms. Eng Fract Mech 2006; 73: 2375–2398.

10.

Naous

Zhang

et al.

Morphology, tensile properties, and fracture toughness of epoxy/Al2O3 nanocomposites. J Polym Sci Part B 2006; 44: 1466–1473.

11.

Kim

Park

Lee

. Fracture toughness of the nano-particle reinforced epoxy composite. Compos Struct 2008; 86: 69–77.

12.

Wang

Chen

et al.

Epoxy nanocomposites with highly exfoliated clay: mechanical properties and fracture mechanisms. Macromolecules 2005; 38: 788–800.

13.

Liu

Hoa

Pugh

. Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocomposites. Compos Sci Technol 2005; 65: 2364–2373.

14.

Gojny

Wichmann

MHG

Köpke

et al.

Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Compos Sci Technol 2004; 64: 2363–2371.

15.

Zhang

. Fracture toughness and fatigue life of MWCNT/epoxy composites. Mater Sci Eng A 2008; 494: 380–384.

16.

Srikanth

Kumar

et al.

Effect of amino functionalized MWCNT on the crosslink density, fracture toughness of epoxy and mechanical properties of carbon-epoxy composites. Compos Part A Appl Sci Manuf 2012; 43: 2083–2086.

17.

Mathews

Swanson

. Characterization of the interlaminar fracture toughness of a laminated carbon/epoxy composite. Compos Sci Technol 2007; 67: 1489–1498.

18.

Arai

Noro

Sugimoto

et al.

Mode I and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayer. Compos Sci Technol 2008; 68: 516–525.

19.

Wong

DWY

Lin

McGrail

et al.

Improved fracture toughness of carbon fibre/epoxy composite laminates using dissolvable thermoplastic fibres. Compos Part A 2010; 41: 759–767.

20.

Cotell CM, Sprague JA and Smidth FAJ (eds) ASM handbook, Vol. 5. Surface engineering, ASM Publishers, USA. 1994.

21.

Kuo

W-S

Tai

N-H

Chang

T-W

. Deformation and fracture in graphene nanosheets. Compos Part A Appl Sci Manuf 2013; 51: 56–61.