Assessments on the mechanical behaviour of a monolithic composite structure instrumented with a monitoring patch

Abstract

In this paper, the monitoring patch is evaluated as an alternative instrumentation technique for aircraft-type composite structures, by means of the Multi-Instrumented Technological Evaluator. In this case, the goal is to evaluate the strength and failure modes of a carbon-epoxy composite plate with two drop-offs instrumented with a monitoring patch. With the aid of finite element models, the testing of the plate under combined loads is analysed to have a first numerical approach of its behaviour. Then, the experimental campaign is accomplished by testing the plate with multi-instrumentation devices and techniques such as strain gauges and digital image correlation. A correct calculation/test correlation is achieved by comparing the strain values calculated by the finite element model and the experimental strain data acquired by gauges and digital image correlation. The results confronted provide a first evidence to quantify the influence of the monitoring patch on the mechanical performance of the composite plate. Therefore, it could be employed in the near future as instrumentation technique on large composite structures.

Keywords

Composite plate monitoring patch plies drop-off torsion-bending

Get full access to this article

View all access options for this article.

References

Sala

Di Landro

Airoldi

et al.

Fibre optics health monitoring for aeronautical applications. Meccanica 2015; 50: 2547–2547.

Mulle

Moussawi

Lubineau

et al.

Response of fiber Bragg gratings bonded on a glass/epoxy laminate subjected to static loadings. Compos Struct 2015; 130: 75–84.

Lammens

Kinet

Chah

et al.

Residual strain monitoring of out-of-autoclave cured parts by use of polarization dependent loss measurements in embedded optical fiber Bragg gratings. Compos A 2013; 52: 38–44.

Meola

Boccardi

Carlomagno

et al.

Nondestructive evaluation of carbon fibre reinforced composites with infrared thermography and ultrasonics. Compos Struct 2015; 134: 845–853.

Aggelis

Barkoula

Matikas

et al.

Acoustic structural health monitoring of composite materials: damage identification and evaluation in cross ply laminates using acoustic emission and ultrasonics. Compos Sci Technol 2012; 72: 1127–1133.

Torres

Collombet

Douchin

et al.

Monitoring of the curing process of composite structures by tunnelling junction sensors. Sens Actuat A 2015; 235: 256–264.

Wang

Chen

et al.

A built-in active sensor network for health monitoring of composite structures. Smart Mater Struct 2006; 15: 1939–1949.

Mall

. Integrity of graphite/epoxy laminate embedded with piezoelectric sensor/actuator under monotonic and fatigue loads. Smart Mater Struct 2002; 11: 527–533.

Hansen

Vizzini

. Fatigue response of a host structure with interlaced embedded devices. Intell Mater Syst Struct 2000; 11: 902–909.

10.

Chilles

Croxford

Bond

. Design of an embedded sensor, for improved structural performance. Smart Mater Struct 2015; 24: 1–10.

11.

Huang

Nemat-Nasser

. Structural integrity of composite laminates with embedded micro-sensors. Sens Syst Netw 2002; 65: 1–5.

12.

Ghezzo

Huang

Nemat-Nasser

. Onset of resin micro-cracks in unidirectional glass fiber laminates with integrated SHM sensors: experimental results. Struct Health Monit 2009; 8: 477–491.

13.

Torres

Crouzeix

Collombet

et al.

Mechanical characterization of an alternative technique to embed sensors in composite structures: the monitoring patch. Appl Compos Mater 2012; 19: 379–391.

14.

Torres

Collombet

Douchin

et al.

Comparison between the classic sensor embedding method and the monitoring patch embedding method for composites instrumentation. Appl Compos Mater 2014; 21: 707–724.

15.

Torres

Crouzeix

Collombet

et al.

Numerical and experimental value added of multi-instrumented technological evaluator for the analysis of thick monolithic composite structures with singularity details. Compos Struct 2015; 127: 41–50.

16.

Collombet F, Crouzeix L, Davila Y, et al. Added value of technological evaluators for structural repair characterization: MITE toolbox. In: Proceedings of the SEICO 13 SAMPE Europe, 2013, Curran Associates, Inc. ISBN: 978-1-62748-629-3.

17.

Johnson

Thomson

David

et al.

Design and testing of crashworthy aerospace composite components. Polym Compos Aerosp Ind 2015; Vol. 1, Chap 10, 261–293. ISBN: 9780857095237.

18.

Kim

H-S

Rhee

S-Y

Cho

. Simple and efficient interlaminar stress analysis of composite laminates with internal ply-drop. Compos Struct 2008; 84: 73–86.

19.

Shim

Lagace

. Mechanisms and structural parameters affecting the interlaminar stress field in laminates with ply drop-offs. J Compos Mater 2006; 40: 345–369.

20.

Her

S-C

. Stress analysis of ply drop-off in composite structures. Compos Struct 2002; 57: 235–244.

21.

Baker W. Structural health monitoring of a bonded composite patch repair on a fatigue-cracked F-111C wing. In: Air Vehicles Division, Defence Science and Technology Organisation, DSTO-RR-0335, 2008, Department of Defence, Australian Government.

22.

McCarthy

Gray

. An analytical model for the prediction of load distribution in highly torque multi-bolt composite joints. Compos Struct 2010; 93: 17–27.

23.

Barriere L, Castanie B, Marguet S, et al. Post-buckling computation of large stiffened structures. In: Proceedings of the 28th international congress of the aeronautical sciences, 2012, International Council of the Aeronautical Science. ISBN 978-0-9565333-1-9s.

24.

Yang

Zhang

Mouritz

et al.

Healing of carbon fibre-epoxy composite T-joints using mendable polymer fibre stitching. Compos B 2013; 45: 1499–1507.

25.

Grondel

Assaad

Delebarre

et al.

Health monitoring of a composite wingbox structure. Ultrasonics 2004; 42: 819–824.

26.

Zhou

H-W

H-Y

Gui

L-L

et al.

Compressive damage mechanism of GFRP composites under off-axis loading: experimental and numerical investigations. Compos B Eng 2013; 55: 119–127.

27.

Périé

Calloch

Cluzel

et al.

Analysis of a multiaxial test on a C/C composite by using digital image correlation and a damage model. Exp Mech 2002; 42: 318–328.

28.

Chen

. An extended cohesive damage model for simulating multicrack propagation in fibre composites. Compos Struct 2016; 143: 1–8.

29.

Eliopoulos

Kostopoulos

Philippidis

. A three-dimensional progressive damage FE model for GFRP composites under monotonic loading. Compos Sci Technol 2016; 123: 79–91.

30.

Batoz

. An explicit formulation for an efficient triangular plate-bending element. Int J Numer Methods Eng 1982; 18: 1077–1089.

31.

Batoz

Bentahar

. Evaluation of a new quadrilateral thin plate bending element. Int J Numer Methods Eng 1982; 18: 1655–1677.

32.

Marty B, Camps T, Tasselli J, et al. New polysilicon sensor and actuator technology for the development of a thermal platform. In: Proceedings of the international solid-state sensors, actuators and microsystems conference, 2009, pp. 1186–1189, Institute of Electrical and Electronics Engineers (IEEE-explore). ISBN: 978-1-4244-4190-7.

33.

Lubin J. Déploiement d’un réseau de capteurs enfouis dans des multi-pliscarbone-époxy pour l’instrumentation in-situ de structures composites pourl’avionique. PhD Thesis. Laboratory for Analysis and Architecture of Systems (LAAS), University of Toulouse, 2012 (in French).