Numerical analysis and investigation of short- and long-term behavior of unidirectional composites

Abstract

This study gives a detailed analysis on estimating the ultimate tensile strength of unidirectional fiber reinforced composites and its creep behavior under sustained tension load. We develop two different micromechanical models that allow us to estimate the longitudinal tensile strength and the evolution with time of fiber and matrix stresses around arbitrary array of fiber breaks. The first model is based on the shear-lag theory while the second one is developed using the software Abaqus. The comparison of the above models allowed to validate the fundamental assumptions of the shear-lag theory (first model) as well as several numerical issues related to time integration and spatial discretization. The Monte–Carlo method was used in order to account for the stochastic fiber strength and its impact on the ultimate tensile strength (short-term) and creep (long-term behavior) of unidirectional composites. Finally, a parametric investigation on the fiber type and the load level on the long-term behavior of unidirectional composites was performed showing an accelerating creep effect for fibers of inferior quality such as glass fibers compared to carbon fibers.

Keywords

Shear-lag model finite element stochastic fiber strength Weibull statistics ultimate tensile strength creep

Get full access to this article

View all access options for this article.

References

Cox

. The elasticity and strength of paper and other fibrous materials. Br J Appl Phys 1952; 3: 72–79.

Beyerlein

Phoenix

Raj

. Time evolution of stress redistribution around multiple fiber breaks in a composite with viscous and viscoelastic matrices. Int J Solids Struct 1998; 35: 3177–3211.

Kotelnikova-Weiler N. Optimisation mécanique et énérgetique d’enveloppes en matériaux composites pour les bâtiments. PhD Thesis, Université Paris-Est, 2012.

Du Peloux L, Tayeb F, Caron JF, et al. The Ephemeral cathedral of creteil: a 350m2 lightweight gridshell structure made of 2 kilometers of GFRP tubes. CIGOS 2015: Innovations in Construction, Cachan, France, 2015.

Daniali S. Short-term and long-term behavior of two types of reinforced plastic beams. In: Proceedings of 46th Annual SPI Conference, SPI 1–5, 1991.

Bank

Mosallam

. Creep and failure of a full-size fiber-reinforced plastic pultruded frame. Compos Eng 1992; 2: 213–227.

Scott

Zureick

. Compression creep of a pultruded E-Glass/vinylester composite. Compos Sci Technol 1998; 58: 1361–1369.

Loni S, Stefanou I and Caron JF. On the application of the time temperature stress superposition principle (TTSSP) for the characterization of the creep behavior of glass fiber reinforced polymers (GFRP). JNC 18, France, 2013.

Abdel-Magid

Lopez-Anido

Smith

et al.

Flexure creep properties of E-glass reinforced polymers. Compos Struct 2003; 62: 247–253.

10.

Ascione

Berardi

Feo

et al.

An experimental study on the long-term behavior of CFRP pultruded laminates suitable to concrete structures rehabilitation. Compos B: Eng 2008; 39: 1147–1150.

11.

Ascione L, Berardi VP and Aponte AD. A viscoelastic constitutive law for FRP materials. Int J Comput Methods Eng Sci Mech 2011; 12: 37–41.

12.

Nedjar

. Modeling long-term creep rupture by debonding in unidirectional fibre-reinforced composites. Int J Solids Struct 2014; 51: 1962–1969.

13.

Hedgepeth JM. Stress concentrations in filamentary structures. Report, NASA TN D-882, Langley Research Center, 1961.

14.

Hedgepeth

Van Dyke

. Local stress concentrations in imperfect filamentary composite materials. J Compos Mater 1967; 1: 294–309.

15.

Lagoudas

Hui

C-Y

Phoenix

. Time evolution of overstress profiles near broken fibers in a composite with a viscoelastic matrix. Int J Solids Struct 1989; 25: 45–66.

16.

Ochiai

Schulte

Peters

PWM

. Strain concentration factors for fibers and matrix in unidirectional composites. Compos Sci Technol 1991; 41: 237–256.

17.

Nedele

Wisnom

. Stress concentration factors around a broken fibre in a unidirectional carbon fibre-reinforced epoxy. Compos Sci Technol 1994; 25: 549–557.

18.

Thionnet

Renard

. Multiscale analysis to determine fiber/matrix debonding criteria in SiC/titanium composites with and without consideration of themanufacturing residual stresses. Compos Sci Technol 1998; 58: 945–955.

19.

Xia

Chen

Ellyin

. A meso/micro-mechanical model for damage progression in glass-fiber/epoxy cross-ply laminates by finite-element analysis. Compos Sci Technol 2000; 60: 1171–1179.

20.

Beyerlein

Phoenix

Sastry

. Comparison of shear-lag theory and continuum fracture mechanics for modeling fiber and matrix stresses in an elastic cracked composite lamina. Int J Solids Struct 1996; 33: 2543–2574.

21.

Fiedler

Hojo

Ochiai

et al.

Failure behavior of an epoxy matrix under different kinds of static loading. Compos Sci Technol 2001; 61: 1615–1624.

22.

Koyanagi

Hatta

Ogawa

et al.

Time dependent reduction of tensile strength caused by interfacial degradation under constant strain duration in ud-cfrp. J Compos Mater 2007; 41: 3007–3026.

23.

Baxevanakis

Jeulein

Lebon

et al.

Fracture statistics modeling of laminate composites. Int J Solids Struct 1998; 35: 2505–2521.

24.

Zinck

. Sample size dependence of flaw distributions for the prediction of brittle solids strength using additive weibull bimodal distributions. Eng Fract Mech 2011; 78: 1323–1327.

25.

Nedjar

Kotelnikova-Weiler

Stefanou

. Modeling of unidirectional fibre-reinforced composites under fibre damage. Mech Res Commun 2014; 56: 115–122.