In this study, a novel process was developed to produce Al/AlN composites by infiltrating molten Al ingot into a mixture of Al and lamp carbon powders. The findings revealed that, during the process, Al2O3 on the surface of Al powder reacted with nitrogen gas and was transformed to AlN. The degree of nitridation was greatly enhanced by adding only less than 3 wt.% lamp carbon, because lamp carbon could act as a dispersion agent as well as a reduction agent. The Al-based composites containing in situ AlN phases showed coefficient of thermal expansion values of ∼11 × 10−6/℃, which were comparable to those of composites containing 60% ex situ AlN particles.
MiracleDB. Metal matrix composites – From science to technological significance. Compos Sci Technol2005; 65: 2526–2540.
2.
MallikSEkereNBestCet al.Investigation of thermal management materials for automotive electronic control units. Appl Therm Eng2011; 31: 355–362.
3.
SurappaMK. Aluminium matrix composites: Challenges and opportunities. Sadhana2003; 28: 319–334.
4.
KainerKU. Metal matrix composites. Custom-made materials for automotive and aerospace engineering, Weinheim: Wiley-VCH, 2006.
5.
EvansAMarchiCSMortensenA. Metal matrix composites in industry: an introduction and a survey, Netherlands: Kluwer Academic Publishers, 2003.
6.
QUXZhangLWuMet al.Review of metal matrix composites with high thermal conductivity for thermal management applications. Porg In Nat Sci: Mater Int2011; 21: 189–197.
7.
BalogMYuPQianMet al.Nanoscaled Al–AlN composites consolidated by equal channel angular pressing (ECAP) of partially in situ nitrided Al powder. Mater Sci Eng A2013; 562: 190–195.
8.
LiuZYKentDSchafferGB. Powder injection moulding of an Al–AlN metal matrix composite. Mater Sci Eng A2009; 513: 352–356.
9.
ZhangQChenGWuGet al.Property characteristics of a AlNp/Al composite fabricated by squeeze casting technology. Mater Lett2003; 57: 1453–1458.
10.
ZhangQWuGChenGet al.The thermal expansion and mechanical properties of high reinforcement content SiCp/Al composites fabricated by squeeze casting technology. Compos Part A2013; 34: 1023–1027.
11.
CouturierRDucretDMerlePet al.Elaboration and characterization of a metal matrix composite: Al/AlN. J Eur Ceram Soc1997; 17: 1861–1866.
12.
VicensJChédruMChermantJL. New Al–AlN composites fabricated by squeeze casting: interfacial phenomena. Compos Part A2002; 33: 1421–1423.
13.
LiuYQCongHYWangWet al.AlN nanoparticle-reinforced nanocrystalline Al matrix composites: Fabrication and mechanical properties. Mater Sci Eng A2009; 505: 151–156.
14.
ChuKJiaCTianWet al.Thermal conductivity of spark plasma sintering consolidated SiCp/Al composites containing pores: Numerical study and experimental validation. Compos Part A2010; 41: 161–167.
15.
ZhaoMWuGZhuDet al.Effects of thermal cycling on mechanical properties of AlNp/Al composite. Mat Lett2004; 58: 1899–1902.
16.
ChuKWuQJiaCet al.Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications. Compos Sci Technol2010; 70: 298–304.
17.
MolinaJMRhêmeMCarronJet al.Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particle. Scripta Mater2008; 58: 393–396.
18.
ChuKJiaCLiangXet al.Experimental and modeling study of the thermal conductivity of SiCp/Al composites with bimodal size distribution. J Mater Sci2009; 44: 4370–4378.
19.
DuXQinMSunYet al.Structure and thermal conductivity of powder injection molded AlN ceramic. Adv Powder Technol2010; 21: 431–434.
20.
YuPBalogMYanMet al.In situ fabrication and mechanical properties of Al–AlN composite by hot extrusion of partially nitrided AA6061 powder. J Mater Res2011; 26: 1719–1725.
21.
Granta Design Limited (2009) CES Edupack version 5.1.0, Material Universe Database, UK. http://www.grantadesign.com.
22.
ChedruMVicensJChermantJLet al.Aluminium-aluminium nitride composites fabricated by melt infiltration under pressure. J Microsc1999; 196: 103–112.
23.
LaiSWChungDDL. Superior high-temperature resistance of aluminium nitride particle-reinforced aluminium compared to silicon carbide or alumina particle-reinforced aluminium. J Mater Sci1994; 29: 6181–6198.
24.
MizuuchiKInoueKAgariYet al.Processing and thermal properties of Al/AlN composites in continuous solid–liquid co-existent state by spark plasma sintering. Compos Part B2012; 43: 1557–1563.
25.
TjongSCMaZY. Microstructural and mechanical characteristics of in situ metal matrix composites. Mater Sci Eng R2000; 29: 49–113.
26.
QuXZhangLMaoWUet al.Review of metal matrix composites with high thermal conductivity for thermal management applications. Prog Nat Sci: Mater Int2011; 21: 189–197.
27.
SchubertTCiupińskiŁZielińskiWet al.Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications. Scr Mater2008; 58: 263–266.
28.
LeeKBKimYHChoiHJet al.Effect of carbon on the nitridation behavior of aluminum powder. J Alloy Compd2016; 689: 218–224.
29.
OkadaTToriyamaMKanzakiS. Direct nitridation of aluminum compacts at low temperature. J Mater Sci2000; 35: 3105–3111.
ZhengQWuBReddyRG. In-situ processing of Al alloy composites. Adv Eng Mater2003; 5: 167–172.
32.
KorshunovAV. Influence of dispersion aluminum powders on the regularities of their interaction with nitrogen. Russ J Phys Chem A2011; 85: 1202–1210.
33.
Dunmead SD, Moore WG, Howard KE, et al. Aluminum nitride, aluminum nitride containing solid solutions and aluminum nitride composites prepared by combustion synthesis and sintered bodies prepared therefrom. Patent 5,710,382, USA, 1998.
34.
Miura H and Matunaga H. Process for producing aluminum nitride and aluminum nitride. Patent 7,022,301, USA, 2006.
